Abstract:Chemical vapor deposition (CVD) is a promising technique for the preparation of W-based plasma-facing materials (PFMs). An overview of the microstructure, chemical composition, thermal conductivity, thermal stability, thermal shock performance under disruption-like and edge localized mode-like transient heat load, and neutron irradiation performance of CVD-W has been given in our previous work. However, for fusion applications, additional properties need to be assessed. To this end, deuterium (D) permeability, D plasma irradiation performance, and thermal fatigue resistance of CVD-W were investigated in this work. The results showed that the D permeability of CVD-W in the temperature range of 973–1173 K was larger than that of the commercial pure W, which was related to the columnar grain structure of CVD-W. Additionally, both CVD-W and commercial pure W were exposed to D plasma up to a fluence of 1 × 1026 m−2. Compared to commercial pure W, CVD-W exhibited a mitigated blistering behavior and lower D total retention, which could be attributed to its strong [001] crystallographic texture along the thickness direction and a lower number of defect density (e.g. grain boundaries). CVD-W and commercial pure W were also exposed to steady-state and transient heat load simultaneously, leading to a base surface temperature and surface temperature increase of about 953–1473 K and 250–300 K, respectively. A strong grain orientation dependence of the surface degradation induced by the combined heat load has been found. Consequently, CVD-W exhibited a much more uniform plastic deformation than pure W, and no surface cracks along grain boundaries were observed in CVD-W. Finally, the industrial-scale production of CVD-W-based PFMs and mockups was demonstrated. This work paves the way for the fusion applications of thick CVD-W coatings.

Development of Cvd-W Coatings on Cucrzr and Graphite Substrates with A Pvd Intermediate Layer

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Recent progress of thick tungsten coating prepared by chemical vapor deposition as the plasma-facing material

PREPARATION AND CHARACTERIZATION OF A TUNGSTEN COATING LAYER ON CuCrZr ALLOY FOR THE PLASMA FACING COMPONENTS OF THE EAST

Preliminary R&D on Flat-Type W/Cu Plasma-Facing Materials and Components for Experimental Advanced Superconducting Tokamak

Surface Topography of CVD-W Coatings on Graphite Substrate with a PVD-Si Intermediate Layer after Thermal Fatigue Testing

Surface Blistering and Deuterium Retention in Chemical Vapor Deposition Tungsten Exposed to Deuterium Plasma

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Surface Diversifying and Deuterium Retention Characteristics of Doped Graphite with SiC Coating Exposed to Plasma Discharges in EAST Tokamak

Thermal Performance and Microstructure of Vacuum Plasma Sprayed Tungsten Coatings under Cyclic Heat Load

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Surface Modifications of W Divertor Components for East During Exposure to High Heat Loads with He

Design and Thermal Shock Performance of W/Cu Functionally Graded Material used as Plasma Facing Component

Directly-cooled VPS-W/Cu limiter and its preliminary results in HT-7

Ablation Resistance of C/C Composites with Atmospheric Plasma-Sprayed W Coating

High heat load properties of actively cooled W/CuCrZr mock-ups by diffusion bonding with Ni or Ti interlayer

Assessment of the Potential Diffusion Barriers between Tungsten and Silicon Carbide for Nuclear Fusion Application

Nondestructive Testing of East W/Cu Divertor Components