Abstract:Oxide dispersion strengthened (ODS) steels are promising materials for high temperature applications, in particular in fission and fusion nuclear reactors. In comparison to common reduced activation ferritic/martensitic steels they exhibit better resistance to neutron irradiation and creep owing to an uniform dispersion of nano-oxides particles (~5 nm) and a very fine grain structure (~500 nm). ODS steels are commonly prepared by high-energy mechanical alloying (HEMA) of a mixture of steel powder and Y2O3 particles followed by a consolidation stage consisting of hot extrusion (HE) or hot isostatic pressing (HIP). The samples are then submitted to annealing around 1100°C for 1-2 hours. Recently, the present authors proposed a novel method based on low-energy mechanical alloying (LEMA). In general ODS microstructure is quite complex and several mechanisms contribute to the mechanical strengthening with different effects depending on the temperature. The present work analyses the role played by each single mechanism at increasing temperature by considering the specific microstructural features. ODS steels prepared through different routes and process parameters display different grain size distribution and homogeneity of particles dispersion, factors which strongly affect the mechanical properties. Yield stress values measured in tensile tests performed at increasing temperature up to 700°C, either taken from literature or achieved by authors, have been examined and the following strengthening mechanisms have been considered to fit the experimental data: (i) solid solution; (ii) Bailey-Hirsch; (iii) Hall-Petch; (iv) Orowan; (v) Coble creep and (vi) Arzt-Rősler-Wilkinson. The analyses evidence advantages and drawbacks of different preparation routes and suggest some criteria for further improving the mechanical properties of these materials.

Study of the Thermal Stability of Nanoparticle Distributions in an Oxide Dispersion Strengthened (ods) Ferritic Alloys

High-Temperature Oxidation Properties and Microstructural Evolution of Nanostructure Fe-Cr-Al ODS Alloys

Transformation of oxide nanoparticles in a nickel-based ODS alloy aged at 1000 °C

Secondary phases characterization by SANS and XAS of an ODS ferritic steel after thermal aging at 873 K

Microstructure, Grain Growth and Hardness of Nanostructured Ferritic ODS Steel Powder during Annealing

Study of Precipitates in Oxide Dispersion-Strengthened Steels by SANS, TEM, and APT

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

Nano-precipitate and its aging behavior in a B2-NiAl strengthened ferritic ODS alloy

Kinetic Monte Carlo Modelling of Nano-oxide Precipitation and its Associated Stability under Neutron Irradiation for the Fe-Ti-Y-O system

High-Temperature Creep Resistance of FeAlOY ODS Ferritic Alloy

In-Situ Synchrotron Investigation of the Elastic and Tensile Properties of Oxide Dispersion Strengthened EUROFER97 Steel

Studies on alloying process of Ni-20Cr-20Fe-0.6Y2O3 powders during mechanical alloying

Tem and Hrtem Study of Oxide Particles in an Al-Alloyed High-Cr Oxide Dispersion Strengthened Ferritic Steel with Hf Addition

Remote Photoplethysmography measurement using constrained ICA

Study on the formation mechanism of Y-Ti-O oxides during mechanical milling and annealing treatment

Nanostructured Oxide‐Dispersion‐Strengthened CoCrFeMnNi High‐Entropy Alloys with High Thermal Stability

Formation and Microstructural Evolution of Ferritic ODS Steel Powders during Mechanical Alloying

Achieving ultrahigh strength in oxide-dispersion-strengthened CoCrNi alloy via in situ formation of coherent Y-Ti-O nanoprecipitates

Thermal and Oxidation Behavior of CoCrFeMnNi Alloy with and Without Yttrium Oxide Particle Dispersion

Microstructure and properties of oxide-reinforced FeCrAl matrix alloy manufactured by selective laser melting

Microstructural stability of a 9Cr oxide dispersion strengthened alloy under thermal aging at high temperatures