Abstract:Oxide dispersion strengthened (ODS) steels are promising materials for high temperature applications, in particular in fission and fusion nuclear reactors. In comparison to common reduced activation ferritic/martensitic steels they exhibit better resistance to neutron irradiation and creep owing to an uniform dispersion of nano-oxides particles (~5 nm) and a very fine grain structure (~500 nm). ODS steels are commonly prepared by high-energy mechanical alloying (HEMA) of a mixture of steel powder and Y2O3 particles followed by a consolidation stage consisting of hot extrusion (HE) or hot isostatic pressing (HIP). The samples are then submitted to annealing around 1100°C for 1-2 hours. Recently, the present authors proposed a novel method based on low-energy mechanical alloying (LEMA). In general ODS microstructure is quite complex and several mechanisms contribute to the mechanical strengthening with different effects depending on the temperature. The present work analyses the role played by each single mechanism at increasing temperature by considering the specific microstructural features. ODS steels prepared through different routes and process parameters display different grain size distribution and homogeneity of particles dispersion, factors which strongly affect the mechanical properties. Yield stress values measured in tensile tests performed at increasing temperature up to 700°C, either taken from literature or achieved by authors, have been examined and the following strengthening mechanisms have been considered to fit the experimental data: (i) solid solution; (ii) Bailey-Hirsch; (iii) Hall-Petch; (iv) Orowan; (v) Coble creep and (vi) Arzt-Rősler-Wilkinson. The analyses evidence advantages and drawbacks of different preparation routes and suggest some criteria for further improving the mechanical properties of these materials.

In-Situ Synchrotron Investigation of the Elastic and Tensile Properties of Oxide Dispersion Strengthened EUROFER97 Steel

Mechanical Properties and Microstructure of 9Cr-Ods-clf-1 Steel

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

Microstructural and material property changes in severely deformed Eurofer-97

Mechanical Behavior of Oxide Dispersion Strengthened Steel Directly Consolidated by Rotary Swaging

Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing

Ultra-fine grained EUROFER97 steel for nuclear fusion applications

Influence of temperature on ductility of nano-ODS steel prepared by low-energy mechanical alloying

Enhancement of FeCrAl-ODS steels through optimised SPS parameters and addition of novel nano-oxide formers

Study of Precipitates in Oxide Dispersion-Strengthened Steels by SANS, TEM, and APT

Cost-Effective Thermomechanical Processing of Nanostructured Ferritic Alloys: Microstructure and Mechanical Properties Investigation

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Thermal stability and sputtering resistance under irradiation of yttria dispersed ferrum films

Mechanical characterisation of V-4Cr-4Ti alloy: Tensile tests under high energy synchrotron diffraction

In-situ investigation of strengthening and strain hardening mechanisms of Cu-added medium-Mn steels by synchrotron-based high-energy X-ray diffraction

The Irradiation Effects in Ferritic, Ferritic-Martensitic and Austenitic Oxide Dispersion Strengthened Alloys: A Review

In Situ Observation of the Atomic-scale High-temperature Phase Transition Enhancement Mechanism at the ODS-W Interface

Laser-based powder bed fusion of pre-alloyed oxide dispersion strengthened steel containing yttrium

Development of an Oxide Dispersion Strengthened Austenitic Steel Powder with 4% Aluminum Addition

Secondary phases characterization by SANS and XAS of an ODS ferritic steel after thermal aging at 873 K