Abstract:Oxide dispersion strengthened (ODS) steels are promising materials for high temperature applications, in particular in fission and fusion nuclear reactors. In comparison to common reduced activation ferritic/martensitic steels they exhibit better resistance to neutron irradiation and creep owing to an uniform dispersion of nano-oxides particles (~5 nm) and a very fine grain structure (~500 nm). ODS steels are commonly prepared by high-energy mechanical alloying (HEMA) of a mixture of steel powder and Y2O3 particles followed by a consolidation stage consisting of hot extrusion (HE) or hot isostatic pressing (HIP). The samples are then submitted to annealing around 1100°C for 1-2 hours. Recently, the present authors proposed a novel method based on low-energy mechanical alloying (LEMA). In general ODS microstructure is quite complex and several mechanisms contribute to the mechanical strengthening with different effects depending on the temperature. The present work analyses the role played by each single mechanism at increasing temperature by considering the specific microstructural features. ODS steels prepared through different routes and process parameters display different grain size distribution and homogeneity of particles dispersion, factors which strongly affect the mechanical properties. Yield stress values measured in tensile tests performed at increasing temperature up to 700°C, either taken from literature or achieved by authors, have been examined and the following strengthening mechanisms have been considered to fit the experimental data: (i) solid solution; (ii) Bailey-Hirsch; (iii) Hall-Petch; (iv) Orowan; (v) Coble creep and (vi) Arzt-Rősler-Wilkinson. The analyses evidence advantages and drawbacks of different preparation routes and suggest some criteria for further improving the mechanical properties of these materials.

Secondary phases characterization by SANS and XAS of an ODS ferritic steel after thermal aging at 873 K

Study of the Thermal Stability of Nanoparticle Distributions in an Oxide Dispersion Strengthened (ods) Ferritic Alloys

The Effect of Y/Ti Ratio on Oxide Precipitate Evolution in ODS Fe-14 Wt Pct Cr Alloys

Small-angle Neutron Scattering Study on the Stability of Oxide Nanoparticles in Long-Term Thermally Aged 9Cr-Oxide Dispersion Strengthened Steel

Small Angle Neutron Scattering Study of Martensitic/ferritic ODS Alloys

Nanosized Oxide Phases in Oxide-Dispersion-strengthened Steel PM2000

Twofold age-hardening mechanism of Al-added high-Cr ODS ferritic steels

Transformation of oxide nanoparticles in a nickel-based ODS alloy aged at 1000 °C

Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing

PREPARATION AND CHARACTERIZATION OF NANOSTRUCTURED 14Cr-Ods FERRITIC STEEL

Thermal stability and influence of Y2O3 dispersoids on the heat treatment response of an additively manufactured ODS Ni–Cr–Al–Ti γ/γ′ superalloy

Effect of Thermal Aging on Microstructural Evolution in Ferrite of Duplex Stainless Steel in Nuclear Power Plant Applications

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

The effect of Ti/Y ratio on the recrystallisation behaviour of Fe–14%Cr oxide dispersion-strengthened alloys

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Phase Transformations in Yttrium –aluminium Oxides in Friction Stir Welded and Recrystallised PM2000 Alloys

In Situ Synchrotron Tensile Investigations on 14YWT, MA957, and 9-Cr ODS Alloys

Influence of nano-particle coherency degree on the coarsening resistivity of the nano-oxide particles of Fe–14Cr–1W ODS alloys

Investigation of Precipitation Behavior of a Novel Ni-Fe-Based Superalloy during High-Temperature Aging Treatment

Characterization of Nanosized Precipitates in 9Cr-Ods Steels by Saxs and Tem