Effect of ageing temperature on the microstructural evolution and mechanical properties in M 2 C and NiAl co-precipitation secondary hardening ultrahigh-strength steel
Haofei Zhu,Zhiping Xiong,Jianwen Mao,Xingwang Cheng
DOI: https://doi.org/10.1016/j.jmrt.2024.04.116
IF: 6.267
2024-04-19
Journal of Materials Research and Technology
Abstract:A novel cost-effective secondary hardening ultrahigh-strength steel, strengthened by the co-precipitation of M 2 C and NiAl, was developed. The present study systematically investigated the co-precipitation evolution, austenite reversion, and mechanisms of strengthening and toughening at different ageing temperatures. As the ageing temperature increased, the quenched microstructure underwent various transformations, including precipitation and dissolution of cementite, nucleation and coarsening of M 2 C and NiAl nanoparticles, as well as reversion of austenite. At ageing temperatures of 427 °C and 454 °C, a small amount of cementite was present in the martensite matrix, and M 2 C and NiAl precipitates started to form, resulting in low strength and poor toughness. At 482 °C, the peak-ageing stage was reached, achieving a maximum yield strength of 1875 ± 4 MPa and an ultimate tensile strength of 2185 ± 3 MPa. This strength is primarily attributed to shear strengthening of NiAl particles and Orowan strengthening of M 2 C carbides. Additionally, the complete dissolution of cementite at this stage improved toughness. As the ageing temperature increased to 510 °C and 538 °C, the strength decreased due to coarsening of M 2 C, while the toughness improved as a result of film austenite reversion and enhanced dislocations bypassing around the M 2 C carbides.
materials science, multidisciplinary,metallurgy & metallurgical engineering