Abstract:High-chromium martensitic steels are a promising material for the production of elements of boilers and steam pipelines, as well as blades and rotors of steam turbines for new coal-burning thermal generating units. The use of such materials will give an opportunity for the transition to ultra-supercritical steam parameters (temperature of 600–620 °C and pressure of 25–30 MPa), which will allow increasing the efficiency of generating units to 45 %. Modifications of the chemical composition of high-chromium steels have led to significant improvements of high-temperature properties such as 100,000 h creep strength and 1 % creep limit, while resistance to softening due to low-cycle fatigue remains understudied in this field. This work covers the study of low-cycle fatigue at room temperature with different amplitudes of deformation of martensitic high-chromium 10%Cr–3%Co–2%W–0.5%Mo–0.2%Cu–0.2%Re–0.003%N–0.01%B steel. The steel was pre-subjected to normalizing at 1050 °С followed by tempering at 770 °С. After heat treatment, the steel structure was a tempered martensitic lath structure stabilised by the particles of secondary phases of M23C6 carbides, NbX carbonitrides, and M6C carbides. The average width of martensite laths was 380 nm, and the dislocation density was 1.4×1014 m−2. At low-cycle fatigue, with an increase in the strain amplitude from 0.2 to 1 %, the number of cycles before failure significantly decreases, and the value of plastic deformation in the middle of the number of loading cycles significantly increases. Maximum softening (18 %) is observed at a strain amplitude of 1 % in the middle of the number of loading cycles. In general, the steel structure after low-cycle fatigue tests does not undergo significant changes: the width of the laths increases by 18 % at a strain amplitude of more than 0.3 %, while the dislocation density remains at a rather high level (about 1014 m−2) at all strain amplitudes.

Evolution of strengthening factors during long-term aging at 650 °C in advanced 10% Cr heat-resistant steel

Age-Hardening Behaviour and the Factors of 00Cr12Ni9Mo4Cu2 Maraging Stainless Steel and Its Factors

Effect of long-term aging on the low cycle fatigue behavior and microstructure of a 10% Cr martensitic steel with low nitrogen and high boron contents at 650 °C

Effect of microstructural evolution on high-temperature strength of 9Cr-3W-3Co martensitic heat resistant steel under different aging conditions

Effect of Microstructural Evolution and Mechanical Properties of Haynes 230 Superalloy During Long-Term Aging at 700 °C

Effect of Long-Term Thermal Aging on Microstructure Evolution and Creep Deformation Behavior of a Novel 11Cr-3W-3Co Martensite Ferritic Steel

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Interpretation of microstructure evolution and mechanical properties under aging treatments of a Fe–24Mn-0.6C–2Al-0.6V austenitic steel for cryogenic application

Influence of Long-Term Aging at Elevated Temperature on Welds with Carbon Migration

Effect of aging temperature on the austenite reversion and mechanical properties of a Fe–10Cr–10Ni cryogenic maraging steel

Precipitates Evolution During Isothermal Aging and Its Effect on Tensile Properties for an AFA Alloy Containing W and B Elements

Microstructure evolution and mechanical behavior of Fe-Mn-Al-C low-density steel upon aging

Microstructural Evolution and Hardness of a Heat Resistant Alloy During Long Term Aging at 700 °C

Microstructure and mechanical properties evolutions of 9Cr heat resistant steel deposited metals with different Si contents during 550 °C aging process

Twofold age-hardening mechanism of Al-added high-Cr ODS ferritic steels

Low-cycle fatigue of 10 % Cr steel with high boron content at room temperature

Effect of aging temperature on the heterogeneous microstructure and mechanical properties of a 12Cr–10Ni–Mo–Ti maraging steel for cryogenic applications

Effect of Solution and Aging Temperatures on Microstructure and Mechanical Properties of 10Cr13Co13Mo5Ni3W1VE(S280) Steel

Effect of Carbides on High-Temperature Aging Embrittlement in 12%cr Martensitic Heat-Resistant Steel

Ex-situ observation of ferrite grain growth behavior in a welded 9Cr-1Mo-V-Nb steel during aging at 740 °C

Microstructural Evolution of a Re-Containing 10% Cr-3Co-3W Steel during Creep at Elevated Temperature