Abstract:Yttrium is an attractive component for nickel base alloys to improve high-temperature oxidation resistance. However, the application suffers from microstructure related problem, due to less unconscious of Y-related oxidation behavior, especially interacting with other key components, such as aluminium. This study introduces the discovery of microstructure depended external and internal oxidation behaviors based on four simplified Ni-Al-Y alloys during isothermally exposing at 800°C/1000°C in air. Using multiscale microstructural characterizations and thermodynamic calculations, different oxidation layer thicknesses have been observed in the three alloys, especially varying with Y and Al concentrations. In the three high-Y-content alloys, Y-related microstructures are found to strongly drive the oxidation process. Original-Ni5Y compound with strong tendency to precipitate secondary γ-Ni strip is favorable to the formation of inner oxidation layer containing mixed oxide particles, whereas original-γ-Ni phase drives the formation of outer scale of NiO. Dense and well-configured lamella-like phase boundaries (PBs) are beneficial to inhibiting the development of the inner layer, compared to coarse and irregular PBs. The resistance to inner oxidation of minor-Y-addition alloy has been significantly improved at 1000°C, benefiting from the mixed oxides along grain boundaries (GBs) and front of inner oxidation layers. From the thermodynamic basis, a type of modified diagram retrieved from ternary isothermal section is utilized to exhibit the oxide evolution, which is consistent with experimental results, especially for those complicated products.

Study on the formation mechanism of Y-Ti-O oxides during mechanical milling and annealing treatment

Influence of Annealing Temperature on Microstructure and Phase Transformations of Oxide System Bi2O3/TiO2 Formed in Aqueous Solutions

Microstructure refinement and second phase particle regulation of Mo−Y2O3 alloys by minor TiC additive

Microstructure development of Y–Ti–O dispersion strengthened Cu alloys fabricated by mechanical alloying

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

The oxidation mechanism of nanostructured Y-Zr-O complex oxide dispersion-strengthened Mo alloys

Effect of Y2O3 and TiO2 addition of dispersed powder on phase evolution and microstructural analysis of (Al, Cu)3Ti intermetallic synthesised via mechanical alloying and powder metallurgy route

A comparative study on the microstructure and performance stability of Cu-Al2O3 and Cu-Y2O3 alloys after high-temperature annealing

Achieving ultrahigh strength in oxide-dispersion-strengthened CoCrNi alloy via in situ formation of coherent Y-Ti-O nanoprecipitates

Unveiling the mechanism of yttrium-related microstructure inhibiting or promoting high-temperature oxidation based on Ni-Al-Y alloys

Transformation of oxide nanoparticles in a nickel-based ODS alloy aged at 1000 °C

Comparative First-Principles Study of the Y2Ti2O7/Matrix Interface in ODS Alloys

Studies on alloying process of Ni-20Cr-20Fe-0.6Y2O3 powders during mechanical alloying

Influence of Ti Content on the Partial Oxidation of TixFeCoNi Thin Films in Vacuum Annealing.

Atomistic Nucleation Mechanism of Titanium Oxides in Steel Based on Homogeneous and Heterogeneous Modes

Phase Transformations in Yttrium –aluminium Oxides in Friction Stir Welded and Recrystallised PM2000 Alloys

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Formation and Microstructural Evolution of Ferritic ODS Steel Powders during Mechanical Alloying

Formation of intermediate phases and their influences on the microstructure of high strength near-β titanium alloy

Unveiling the phase evolution and mechanical properties of Ni1.5Co1.5CrTix alloys with ultrafine/nano structure

Evolution of Y2O3 precipitates in ODS-316 L steel during reactive-inspired ball-milling and spark plasma sintering processes