Abstract:Steel is the most common engineering material used in additive manufacturing. In this work, 100-layers wall structures of 17Cr2NiSi steel alloys were successfully fabricated by laser metal deposition (LMD) in the presence of small dispersed amounts of Y2O3 nanoparticles without additional heat treatment. The effects of added amounts of Y2O3 nanoparticles on the microstructure, formability, microhardness, and tensile properties were all investigated. The results indicated a decline in many features, including formation of columnar and dendrite solidification structures, elongated grains in the build direction, pronounced crystallographic textures, and interlayer heat-affected zone. The reason for this was associated with the dissociation effect of Y3+ ions on dendrites by decreasing the melting point of the material, combined with the low-energy heterogeneous nucleation effect of Y elements on the grains through segregation into Si-Y-O particles. Meanwhile, minor amounts of Y element (<10 ppm)promoted the distribution and dispersion of Si particles in the modified materials, while the majority of Y element inhibited the formation of chromium oxide phase to generate Y2O3 as slagging. This led to lower remnant porosity and uniformly modified wall microstructures. The presence of nano-Y2O3 improved the 3D printing properties of LMD stainless steel in terms of preferable formability (16.4 % up), uniform micro-hardness, and uniform tensile properties. In sum, these findings look promising for future fabrication of alloy steel by LMD method.

Evolution of Y2O3 precipitates in ODS-316 L steel during reactive-inspired ball-milling and spark plasma sintering processes

Mechanical Properties and Microstructure of 9Cr-Ods-clf-1 Steel

Achieving excellent mechanical properties of ODS steel by Y2O3 addition

Enhancement of FeCrAl-ODS steels through optimised SPS parameters and addition of novel nano-oxide formers

Preparation of nanostructural oxide dispersion strengthened (ODS) Mo alloy by mechanical alloying and spark plasma sintering, and its characterization

Hot rolling and annealing effects on the microstructure and mechanical properties of ODS austenitic steel fabricated by electron beam selective melting

Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing

Formation and Microstructural Evolution of Ferritic ODS Steel Powders during Mechanical Alloying

Development of an Oxide Dispersion Strengthened Austenitic Steel Powder with 4% Aluminum Addition

Microstructure development of Y–Ti–O dispersion strengthened Cu alloys fabricated by mechanical alloying

Laser-based powder bed fusion of pre-alloyed oxide dispersion strengthened steel containing yttrium

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

Achieving ultrahigh strength in oxide-dispersion-strengthened CoCrNi alloy via in situ formation of coherent Y-Ti-O nanoprecipitates

Manufacturing ODS Steels from GARS Powders by Friction Consolidation and Extrusion

Microstructure and mechanical performance of ODS superalloys manufactured by selective laser melting

Microstructure and properties of oxide-reinforced FeCrAl matrix alloy manufactured by selective laser melting

Effects of Zr, Al, Al+Zr Addition on Phase Evolution Characteristics and Strengthening Mechanisms of Fe‐42Ni‐2Y2O3 ODS Steels Developed by Mechanical Alloying and Spark Plasma Sintering

Microstructural evolution of a Y2O3 network reinforced Ni–Co based superalloy fabricated by spark plasma sintering

Laser metal deposited steel alloys with uniform microstructures and improved properties prepared by addition of small amounts of dispersed Y2O3 nanoparticles

Study on the formation mechanism of Y-Ti-O oxides during mechanical milling and annealing treatment

Mechanical Behavior of Oxide Dispersion Strengthened Steel Directly Consolidated by Rotary Swaging