Abstract:Numerical thermal analysis has become a powerful tool for hollow brick design concerning energy saving issue. In the present paper it was employed to understand the heat transfer performance of 240×115×90 concrete hollow bricks with 71 different configurations. The general commercial computational fluid dynamics (CFD) soft FLUENT® was used in the research. A comprehensive investigation on the effect of enclosure configurations with the same void volume fraction on equivalent thermal conductivity (ETC) was conducted. The enclosure numbers in parallel and vertical directions of heat transfer were investigated in details. The effect of enclosure staggered form is also discussed carefully. In the research, ETC data was compared with radiation and nature convection and without them. In addition, temperature and velocity vector distributions were also illustrated in order to clarify heat transfer mechanism. It can be concluded from this research that ETC values are dependent on the combining effect of heat conduction in all domains, natural convection within enclosure and radiation on inner surface. ETC values decrease with the increasing enclosure numbers in the parallel direction of heat transfer and increase in the vertical direction of heat transfer, vise versa. Therefore, increasing enclosure numbers in the parallel direction becomes more favorable to decrease ETC than that in the vertical direction of heat transfer. Secondly, the relative enhancement of radiation heat transfer on ETC ranged from 7.41% to 25.39%, and the nature convection from near zero to 22.50%, depending on the enclosure numbers and their arrangement configurations. Finally, the increasing enclosures in the parallel direction can decrease ETC values from 11.59% to 20.94% for enclosure vertical aligned bricks. Under the given conditions the smallest ETC is 0.32619W/(mK) for enclosure staggered form with three enclosures in length direction and eight in width direction, which is only 23.30% of the solid concrete brick in the present research.

Numerical Thermal Analysis of Applying Insulation Material to Holes in Hollow Brick Walls by the Finite-Volume Method

Numerical Thermal Optimization of the Configuration of Multi-Holed Clay Bricks Used for Constructing Building Walls by the Finite Volume Method

Numerical study for influence of exterior insulation on equivalent thermal conductivity of hollow brick walls

Optimization of the Configuration of 290×140×90 Hollow Clay Bricks with 3-D Numerical Simulation by Finite Volume Method

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Numerical simulation of concrete hollow bricks by the finite volume method

EFFECT OF MASONRY MORTAR ON THERMAL INSULATION OF AAC MASONRY

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Finite Element Analysis of 3D Heat Transfer of Typical Thermal Bridge of Self-Thermal Insulation in Hot-Summer and Cold-Winter Zone

NUMERICAL SIMULATION OF OPTIMIZING CONFIGURATION OF HOLLOW CALY BRICKS

Numerical Study on Improving the Thermal Insulation Performance of Hollow Blocks by Optimizing the Holes Configuration

Methods for Evaluating and Improving Thermal Performance of Wall-to-floor Thermal Bridges

Numerical Analysis on Thermal Behavior of Composite Wall Combined Autoclaved Aerated Concrete With Thermal Insulting Material in Summer Day

3D Numerical Thermal Optimization of the Roofs Constructed with Cast-in-situ Hollow Concrete Floor System by Finite Volume Method

Optimization of Pass Design of Bidirectional Thermal-Insulation Bricks

Numerical and experimental analysis of building walls thermal performance

Analytical Optimization of the Transient Thermal Performance of Building Wall by Using Thermal Impedance Based on Thermal-Electric Analogy

Non-Destructive Possibilities of Thermal Performance Evaluation of the External Walls

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Numerical investigation of the thermal behaviour of external multilayer walls to ensure the buildings retrofitting thermal insulation

Experimental Research on Seismic Response of Heat-Insulating Perforated Brick Full-Scale Walls with Openings