Abstract:Composite mechanical joints are extensively used and becoming crucial components for primary and secondary structures in industry. Considerable efforts have been contributed to the failure behavior of resin matrix laminate composite bolt joint, but few ones refer to carbon matrix woven composites. In current work, a comprehensive experimental and numerical research on the failure behavior for satin woven carbon/carbon composites under pin-loading, which is the typical loading case for mechanical joint, was presented. Seven types of specimens with different configuration were tested to evaluate the influence of the geometry on the failure modes. The testing results stated that, with the increasing of width-to-hole diameter ratio (W/D) and edge distance-to-hole diameter ratio (E/D), the net tension and shear out failure transformed into the bearing failure respectively, while hole diameter-to-thickness ratio (D/t) hardly affect the failure mode. For a further exploration for damage mechanism of the acceptable bearing failure in engineering, damage accumulation and evolution were assessed combining numerical simulation and acoustic emission monitoring. In view of the complexity of satin woven framework, the hierarchical multiscale numerical strategy from micro-to macro-level was proposed to obtain the material mechanical performance. In order to acquire reliable prediction and consider the effects of the uncertainty sources on composite properties, the model geometry reconstruction was performed using X-ray tomography. Meanwhile, the fiber and void random distributions were determined via the Random Sequential Adsorption algorithm. The Murakami-Ohno damage theory was adopted to characterize the damage propagation. It is concluded that, the numerical prediction agreed with the testing results reasonably well, and the main damage mechanism during the bearing failure included matrix cracking, yarns pulling-out and yarns fracture matching various amplitude ranges of acoustic emission signals.

Mechanical Property and Failure Mechanism of 3D Carbon–Carbon Braided Composites Bolted Joints under Unidirectional Tensile Loading

Mechanical performance and parameter sensitivity analysis of 3D braided composites joints

Parametric study on the load-carrying capacity of plain-woven composites hybrid bonded-bolted joints

Experiment investigation on biaxial tensile strength of 3D in-plane braided C/C composites

Effect of Braiding Architectures on the Mechanical and Failure Behavior of 3D Braided Composites: Experimental Investigation

Mechanical properties of all-C/C composite hybrid bonded/bolted joints

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

Comparative Investigation of Mechanical Properties between 3D Braided and Laminated Composites

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading

Tensile Failure Analysis of Carbon Fiber Composite Material L-shaped Joint

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

Tensile tests and strength estimation for double-lap single-bolt j oints in T800 carbon fiber reinforced composites

Experimental study of bonded, bolted, and hybrid braided CFRP joints with different stacking sequences and lapping patterns

Experiment and simulation study on bonded, bolted and hybrid bolted/bonded joints of textile CFRP using bimodulus constitutive model

Experimental study on tension and compression mechanical property of 3D fine woven punctured C/C composites

Study on Tensile and Compressive Properties and Size Effect of 3D Fine Woven Punctured C/C Composites

Parameterized meso-scale modeling and experimental study on the tensile damage evolution and strength of 3D five-directional braided composites

Mechanical Behaviors of the Three-Dimensional Woven Carbon/carbon Composite Materials under Biaxial Compression

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading