Bone marrow subpopulations contain distinct types of endothelial progenitor cells and angiogenic cytokine-producing cells.

Yoshiaki Miyamoto,Takashi Suyama,T. Yashita,H. Akimaru,H. Kurata

DOI: https://doi.org/10.1016/J.YJMCC.2007.08.001

IF: 5.763

2007-11-01

Journal of Molecular and Cellular Cardiology

Abstract:

What problem does this paper attempt to address?

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Xianyan Wu,Baozhong Sun,Baicun Wang,Xiaoling Shi

DOI: https://doi.org/10.1016/j.coco.2023.101650

IF: 8

2023-01-01

Composites Communications

Abstract:The dynamic behavior of three-dimensional (3D) circular braided composite tubes with different braided parameters was experimentally investigated subjected to axial impact compression using a Split Hopkinson Pressure Bar (SHPB). The damage characterization of the post-impacted tubes was examined using scanning electron microscope (SEM) and X-ray micro-computed tomography (micro-CT). The influence of braided parameters and strain rate, including braided angle, the number of braided layer and axial yarn, on the dynamic mechanical properties, progressive crush characteristics and failure mechanism of 3D braided composite tubes was analyzed in detail. It was found that the smaller braided angle and the larger numbers of braided layers contributed to better axial dynamic properties. The compressive strength, stiffness and specific energy absorption (SEA) of 3D five direction (3D5D) tubes with axial yarn were larger than those of 3D four direction (3D4D) tubes without axial yarn. Meanwhile, the dynamic mechanical response and damage patterns of braided tubes exhibited significant strain rate effects. The impact compression failure mechanisms of braided tubes were mainly fiber tows crushing, fiber breakage, fiber buckling, shear fracture, resin cracking, interfacial cracks, fiber-matrix debonding, etc.
Finite element analysis of 2-D tubular braided composite based on geometrical models to study mechanical performances

Ali Gholami,Garrett W. Melenka

DOI: https://doi.org/10.1080/15376494.2021.2001879

2021-11-21

Mechanics of Advanced Materials and Structures

Abstract:Tubular Braided Composites (TBC) have a higher strength to weight ratio than conventional materials and better mechanical properties compared to laminated composite materials. The optimization of the TBC and the introduction of new applications requires a comprehensive understanding of TBC’s behavior. One efficient way to study the behavior of TBC is using Finite Element Modeling (FEM). This paper will introduce a method for generating geometrical models with different patterns and variables. Micro Computed-Tomography ( CT) is also used for generating an actual 3-D model of a TBC. The geometrical model and the CT models are visually compared. The geometrical model is inputted into the FEM software package and is studied in different conditions. Finally, the result of FEM is compared against experimental and analytical results.

materials science, multidisciplinary,mechanics, composites, characterization & testing
Investigation of parameterized braiding parameters and loading directions on compressive behavior and failure mechanism of 3D four-directional braided composites

Hao Zhu,Xiang-bin Du,Dian-sen Li,Lei Jiang

DOI: https://doi.org/10.1016/j.compstruct.2022.115357

IF: 6.3

2022-05-01

Composite Structures

Abstract:Three-dimensional (3D) braided composites have been witnessed outstanding advances in structural applications in the past few decades. Herein we established parameterized finite element model to characterize, on a mesoscopic scale, the compressive behaviors of 3D braided composites where the relative displacement boundary conditions were applied, and the cross-sectional extrusion and realistic spatial architecture among braiding yarns were considered. Moreover, the associated relationships between damage evolution and strength prediction and different loading directions, braiding angles and fiber volume fraction, were then thoroughly investigated. The damage evolution was evaluated quantitatively based on continuous damage mechanics. The main damage and failure patterns of the yarn and matrix were presented. The results convincingly concluded that the compressive behaviors remarkably depended on the braiding angle, fiber volume fraction, and loading direction. The numerical stress–strain responses agreed well with the experimental, proving that stiffness degradation and failure strength could be predicted accurately using the established model.

mechanics,materials science, composites
Numerical investigation of tensile behavior of three-dimensional six-directional braided composites

Xiang-bin Du,Dian-sen Li,Lei Jiang,Dai-ning Fang

DOI: https://doi.org/10.1016/j.ijmecsci.2022.107815

IF: 7.3

2022-10-08

International Journal of Mechanical Sciences

Abstract:Based on the mesostructure, a parametric finite element (FE) model of the 3D6d braided composites was developed considering the real cross-sectional shape of the yarn and its contact relationship. The 3D Hashin criterion and maximum stress criterion were used for failure determination and periodic displacement boundary conditions were imposed on the model to numerically simulate the initiation, propagation and final failure of yarns and matrix damage. The FE model accurately predicts the longitudinal tensile strength of 3D6d braided composites and simulates the progressive damage process associated with the stress-strain behavior. The longitudinal mechanical properties of the 3D6d braided composites decrease with increasing braiding angle, while increasing the fiber volume fraction leads to enhancement of these properties. Furthermore, the change rate of longitudinal mechanical properties with braiding angle is relatively stable, and the influence of fiber volume fraction on longitudinal properties decreases with the increase of braiding angle. For the damage mode, the increase of braiding angle makes the damage of braiding and sixth-directional yarns gradually change from single direction to multiple directions, and the decrease of fiber volume fraction makes the damage of braiding and fifth-directional yarns at the peak stress more serious.

engineering, mechanical,mechanics
Thermo-mechanical response of 3D braided composites with different braiding angles under high strain rate punch shear loading

Zhimei Chen,Chengming Yue,Yan Zhang,Ping Wang,Yuanyuan Li,Zhiqi Gu

DOI: https://doi.org/10.1177/00219983221116672

IF: 3.191

2022-08-12

Journal of Composite Materials

Abstract:Journal of Composite Materials, Ahead of Print. Thermodynamic responses of three-dimensional (3D) braided composites with different braiding angles (25°/35°/45°) under high strain rate punch shear loading were studied through experiments and simulations. Plasticity criterion, shear criterion and interface damage criterion are introduced into the developed full-scale thermal-mechanical coupled finite element analysis model. Combined with macroscopic experiments and microscopic analysis, effects of braiding angle, strain rate and thermal-mechanical coupling on 3D braided composites were discussed from stress propagation and adiabatic temperature rise process. Peak stress and energy absorption increased with braiding angle or strain rate, which increased punch shear resistance of braided composites. Finally, complex thermal-mechanical coupling damage mechanism of composites was revealed through distribution of stress and temperature. Composites eventually appeared three main damage modes: interface debonding, fiber fracture and fiber extraction. Damage and energy absorption in critical loading region were also obtained. A low temperature and low stress area formed in the middle of shear band of composites. Plastic strain and thermal strain aggravated fracture of fibers.

materials science, composites
The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

J. Liang,G. D. Fang,Q. Lu,Y. Wang

DOI: https://doi.org/10.1117/12.847270

2010-01-01

Abstract:The mechanical behavior of 3D four-step braided composites under tensile loading is studied by computational micromechanics. Interfacial damage is considered by cohesive zone model in FEA of a representative volume cell (RVC) of the braided composites. A parametrical study is evaluated the influence of interfacial properties on the stress-strain curve and corresponding failure modes. The damage development of the braided composites with interfacial damage is discussed. It is found that the interfacial damage which is one of factors to cause the nonlinear stress-strain relation can decrease the tangential modulus but not control the ultimate strength.
Spatial distribution of yarns and mechanical properties in 3D braided tubular composites

Y. Q. Wang,A. S. D. Wang

DOI: https://doi.org/10.1007/bf02481384

IF: 2.3

1997-03-01

Applied Composite Materials

Abstract:This paper outlines a method which links the following analytically simulated events in sequence: (1) braiding of a 3D preform of tubular cross-section—characterized by a set of braiding parameters defining the braiding setup and braiding steps; (2) geometric description of the yarn topology in the braided preform—in explicit terms of a set of topological parameters defined by the preform shape and the braiding parameters; (3) description of the exact yarn distribution after preform consolidation with a binding matrix—the values of the topological parameters are related to the exterior dimensions and surface features of the consolidated preform; and (4) forecasting the mechanical properties in the final composite—via a suitable micromechanics model that takes into account the spatial yarn distribution in the composite and properties of the constituents.It is shown that these sequential events form a closed-loop linkage which connects the properties of the final composite all the way to the initial preform braiding setup design; the analytically derived interrelationships in each link can provide for design simulations of three dimensionally braided, complex-shaped and property-specific composite articles.In order to obtain explicit interrelationships, the 4-step 1×1 braiding procedure is utilized in the analytical development. For the same reason, a graphite yarn and an epoxy resin with known properties are used in illustrative examples. There can be more than one braiding setup design for a preform to have the same shape and overall dimensions; but the yarn structure and properties in the final composite can differ widely if different braiding setups are used. Hence an optimization for a composite shape to meet the prescribed requirements may be conducted using the developed closed-loop.

materials science, composites
Unit-cell geometry and mechanical properties of three-dimensional seven-directional braided composites

Dian-sen Li,Xue Yang,Hao Zhu,Lei Jiang,Dai-ning Fang

DOI: https://doi.org/10.1016/j.tws.2022.110299

2022-11-18

Abstract:Three theoretical microstructural models were constructed based on manufacturing three-dimensional seven-directional (3D7d) braided preforms, and their relationships with braiding angles, fiber volume fractions, and yarn filling factor were investigated. The influences of braiding parameters, loading directions, and braiding structure on the performances of 3D7d braided composites were predicted in combination with a bridging model. The results concluded that the longitudinal modulus and tensile strength decreased with increasing braiding angles, while the transverse modulus and strength were opposite, and the performances of composites were better at higher fiber volume fractions. Compared with 3D4d braided composites, the transverse strength of 3D7d braided composites improved significantly. Furthermore, the three microstructural models were damaged in the order of interior, surface, and corner unit cell models during tensile loading. Especially, the fifth and seventh yarns within unit cell models were damaged firstly under longitudinal and transverse loads, respectively. This method adopted in this work provides a basis for predicting the mechanical properties of 3D7d braided composites.

engineering, mechanical,mechanics, civil
Finite Element Modeling of Mechanical Properties of 3D Five-Directional Rectangular Braided Composites

Dian-sen Li,Dai-ning Fang,Nan Jiang,Yao Xuefeng

DOI: https://doi.org/10.1016/j.compositesb.2011.05.042

IF: 11.322

2011-01-01

Composites Part B Engineering

Abstract:A new parameterized finite element model (FEM) is established for 3-Dimensional (3D) five-directional rectangular braided composites. The model precisely simulates the spatial configuration of the braiding yarns and the axial yarns with consideration of the cross-section deformation as well as the surface contact in the braiding process. Moreover, this model orients in the same reference frame as the composites and the relationships among the structural parameters, particularly the braiding angle and the interior braiding angle, are investigated. A prediction of the effective elastic properties and the meso-scale mechanical response of 3D five-directional braided composites have been presented to verify the validation of the FEM. The effects of the braiding parameters on the mechanical properties are investigated in detail in this study. The results indicate that it is convenient to predict all the elastic constants of 3D five-directional braided composites with different parameters simultaneously using the FEM. Moreover, the FEM can successfully predict the meso-scale mechanical response of 3D five-directional braided composites containing periodical structures. In the mean while, the geometric characteristics and the mechanical properties of 3D five-directional and 3D four-directional braided composites have been compared.
Mesoscale progressive damage and strength analysis of three-dimensional braided composites under tension

Hao Zhu,Dian-Sen Li,Lei Jiang

DOI: https://doi.org/10.1016/j.engfracmech.2020.107221

IF: 5.4

2020-10-01

Engineering Fracture Mechanics

Abstract:Three-dimensional (3D) braided composites have broad development prospects in various industries. This paper establishes a real parametric finite element model (FEM) to conduct progressive damage analysis and strength prediction for 3D braided composites. 3D FEM is established with consideration of the cross-section deformations and surface contact of adjacent braiding yarns. Subsequently, 3D Hashin and maximum stress failure criteria are separately implemented as initiation damage criteria for yarn and matrix. Moreover, different damage modes are employed to predict progressive failure process of yarn and matrix. Lastly, the relationship of braiding parameters to strength was thoroughly analyzed and numerical predictions generated which were validated through the experimental data. The results demonstrate that stress-strain curves and strength values are closely related to the braiding angle and the fiber volume fraction. Moreover, damage evolutions show shear bands predominately occur in the surface of yarns for small braiding angles, while for large braiding angles, it mainly occurs in the yarn/yarn interface. The yarn damage for composites of low fiber volume fraction occurs on yarn/yarn junction and then extends to entire yarns, while for high fiber volume fraction, it takes place directly on entire yarns.

mechanics
Meso-scopic Computing Mechanics Analysis of Three-Dimensional Multi-Directional Braided Composites

庞宝君,曾涛,杜善义

DOI: https://doi.org/10.3969/j.issn.1007-4708.2001.02.020

2001-01-01

Abstract:Based on the unit cell geometrical model of 3\|dimensional multi\|directional braided composites, the forming method of multi\|phase element stiffness matrix is studied, and the meso\|scopic calculating mechanics analyzing method of 3\|dimensional multi\|directional braided composites is established. The effective mechanical properties of the 4\|directional carbon/epoxy braided composites are predicted and the comparison between the theoretical predictiom and the experimental data is presented.
Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

Jianwei Shi,Xiaodong Yang,Xishuai Chen,Kou Du,Cheng Li,Yaxu Yang

DOI: https://doi.org/10.1002/pc.27845

IF: 5.2

2023-10-18

Polymer Composites

Abstract:Experimental and numerical investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints. The jointing problem has become increasingly prominent with the growing applications of composites in industrial fields. Besides, the hybrid bonded‐bolted (HBB) joint has aroused extensive attention for its excellent mechanical performance. In this study, numerous tests and simulations were conducted to investigate the load‐bearing performance of the plain‐woven carbon fiber‐reinforced plastic (CFRP) laminates HBB joints under quasi‐static uniaxial tensile conditions. The influence of HBB morphological parameters was systematically analyzed. The 3D Hashin failure criterion was successfully implemented in the finite element model for the failure analysis of a numerical equivalent cross‐ply laminate structure. Highlights FEA‐based mechanical property analysis tool for CFRP bonded‐bolted joint. Quantitative influences of HBB morphological parameters are discussed. Failure modes of HBB with different characteristics are revealed.

materials science, composites,polymer science
Advances in Multiscale Modeling and Mechanical Properties Characterization of 3D‐Braided Composites

Ningxin Zhang,Xiangxia Kong,Junjun Zhai,Zeteng Guo,Shi Yan,Yakai Duan,Zijian Zheng

DOI: https://doi.org/10.1002/adem.202401457

IF: 3.6

2024-10-15

Advanced Engineering Materials

Abstract:In this article, first, the multiscale analysis models of 3D‐multi‐directional‐braided composites are reviewed, and then the theoretical and numerical research progress on the static and dynamic multiscale mechanical performance of regular components of 3D‐braided composites are summarized. In addition, the research progress on the multiscale static and dynamic response of special‐shaped components of 3D‐braided composites is also summarized. The 3D‐braided composites have been widely used in aerospace and other fields due to the excellent mechanical properties, designability, and resistance to delamination. Accurately analyzing and evaluating mechanical properties of braided composite structures is the key, which successfully designs related structural components. However, 3D‐braided composites have complex internal meso–microscopic structures, and directly establishing a solid structure model to predict mechanical behavior poses certain challenges. The multiscale research methods are a type of approach that studies the cross‐scale structural characteristics at macro–meso–microscopic scales and couples relevant scales into a whole. Its emergence provides the possibility for evaluating the overall structural performance of 3D‐braided composites. In this article, first, the multiscale analysis models of 3D‐multidirectional‐braided composites are reviewed, and then the theoretical and numerical research progress on the static and dynamic multiscale mechanical performance of regular components of 3D‐braided composites is summarized. In addition, due to the distortion and variation of geometric shapes of 3D‐braided composites on the meso–microscopic structure; therefore, also in this article, the research progress on multiscale mechanical performance characteristics of special‐shaped components is summarized. Finally, the key problems in the multiscale research of 3D‐braided composites are presented.

materials science, multidisciplinary
Parameterized meso-scale modeling and experimental study on the tensile damage evolution and strength of 3D five-directional braided composites

Xiang-bin Du,Hao Zhu,Jing Ai,Dian-sen Li,Lei Jiang

DOI: https://doi.org/10.1016/j.matdes.2021.109702

2021-07-01

Abstract:A parametric finite element model (FEM) of three-dimensional five-directional (3D5d) braided composites was established considering the yarn space contact relationship. By adopting reasonable damage criteria and boundary conditions, the damage behavior and mechanical properties of FEM under tensile loading were investigated. The finite element prediction results are consistent with the experiments, indicating that the FEM can effectively predict the progressive damage and strength of 3D5d braided composites. Damage evolution shows that the main failure modes with small braiding angles include tensile failure of braiding yarn and axial yarn, while the large braiding angles are tensile shear failure of braiding yarn. As the fiber volume fraction increases, the initial damage location of the FEM changes from the intersection of braiding yarn/axial yarn to the junction among the braiding yarns. The stress-strain curves results show that the 3D5d braided composites exhibit brittle fracture characteristics under longitudinal tensile loading, and the mechanical properties are significantly correlated with the braiding angle and fiber volume fraction. In addition, the tensile properties of 3D5d braided composites are also compared with those of three-dimensional four-directional (3D4d) braided composites.

materials science, multidisciplinary
A multi-scale method for predicting the properties of 3D braided composite under three-point bending load

Guoqing Yu,Boqiang Shi,Yanhua Shen

DOI: https://doi.org/10.1088/2053-1591/ac1449

IF: 2.025

2021-07-01

Materials Research Express

Abstract:Abstract A more versatile and efficient multi-scale coupling finite element method for researching the mechanical response of 3D braided composites under three-point bending load is represented in this paper. In the mesoscale, the multiphase representative unit-cell models are established to describe the mesoscopic structure which consists of braiding yarns and matrix. In the macroscale, the unit-cells are regarded as homogeneous material, and the load and constraint conditions are applied on the macroscopic structure model. The multi-scale homogenization theory is introduced to calculate the equivalent stiffness matrixes of mesoscopic unit-cells and build the mathematical relationships between the mesoscopic stress fields and the macroscopic strain fields. According to the element damage criterion, the bending modulus and ultimate load-bearing ability of 3D braided composites are predicted by simulating the progressive damage process of unit-cells Comparing with the experimental result, the predicted result satisfies the required precision for engineering.

materials science, multidisciplinary
Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Hao Zhu,Dian-sen Li,Wen-fen Han,Lei Jiang

DOI: https://doi.org/10.1016/j.matdes.2020.108917

2020-10-01

Abstract:Three-dimensional (3D) six-directional braided carbon/epoxy composites are widely used in aerospace field and this is successfully fabricated in this study. The composite is thoroughly analyzed with regard to both mechanical properties and failure mechanism in connection with the affecting factors, i.e., loading direction and temperature. At room and elevated temperatures, the in-plane compressive properties of such composites are obtained, and their failure mechanism is evaluated. A progressive damage model is established to predict the mechanical properties and to quantitatively interpret the failure behavior. At room temperature, longitudinal curve increases linearly and then drops suddenly, indicating brittle characteristics; the transverse curve is linear up to the failure point and drops gradually after the peak point. At elevated temperatures, the curves become non-linear up and the mechanical properties of composites decrease. At room temperature, the longitudinal compression presents shear fracture and shear plane exfoliation. Meanwhile, failure is observed in fiber rupture in various directions and matrix cracks. The transverse failure is observed in shear cracks and braiding fibers shedding. At elevated temperatures, 45° shear cracks are developed, the fibers are pulled out, the texture of matrix softens and exfoliates, and a noticeable debonding of the interface occurs.

materials science, multidisciplinary
Thermal stress distribution of multi-layered composite tubes affected by braiding angle

Zhaohua Huang,Wensuo Ma,Chenhui Jia,Xianqing Lei,Zhuangya Zhang

DOI: https://doi.org/10.1177/15589250221144008

IF: 2

2022-01-01

Journal of Engineered Fibers and Fabrics

Abstract:Braided tubular composites have been widely applied in various industries, such as aerospace, automobile, and sports, due to their light weight, high fatigue resistance, and good corrosion resistance. It is necessary to study the effect of the preform parameters on the thermodynamic behavior of braided tubular composites. A thermoelastic model of braided multi-layered tubes was developed to investigate the effect of changing the braiding angle on the thermal stress distribution. The thermal stress distributions of different structures were analyzed based on the model. The analysis results show that the layer-by-layer braiding angle critically affects the gradient of the axial thermal stress. The change rates of the braiding angle also significantly affect the gradient of the radial thermal stress. The theoretical results were verified by finite element analysis. These results are beneficial to the optimal design of braided composite tubes subjected to thermal load.

materials science, textiles
Damage and failure analyses of 3D4d braided composite shafts under torsional load and the effects of braid processing parameters on their torsional properties

Ya Wang,Zhen‐Guo Liu,Yun‐Peng Yi,Yu‐Chen Wei,Zhi‐jian Li,Yi‐Bo Wang

DOI: https://doi.org/10.1002/pc.25946

IF: 5.2

2021-02-10

Polymer Composites

Abstract:This paper presented the numerical and experimental studies on the torsional properties of 3D braided composite shafts. The torsion test was first conducted, then a parametric tubular unit cell model was constructed based on geometric mapping relations to detail the micro geometries of the shafts. The local yarn orientations were derived using finite deformation theory, and the 3d Hashin failure criterions were adopted to simulate the progressive damage behaviors of the shafts. The predicted results were in good agreements with the experimental ones, which validated the FE model. Based on the FE results, the damage was analyzed in detail, it was found that the transverse shear‐tension damage of longitudinally compressive yarns was critical for the failures of 3D4d braided composite shafts under torsional load. The surface damage initiated first, and then propagated into the internal structure, while the internal damage was much severe in the final failure morphology. The effects of braid processing parameters (M, N, γr, and r1,) on the torsional properties were also reported. A dependency of increasing then decreasing was confirmed by the simulation results for all four parameters, and it was found that the peak values could be achieved when the average braiding angle was around 45o.

materials science, composites,polymer science
Numerical Study on the Tensile Behavior of 3D Four Directional Cylindrical Braided Composite Shafts

Guoqi Zhao,Jiayi Wang,Wenfeng Hao,Yinghua Liu,Ying Luo

DOI: https://doi.org/10.1007/s10443-017-9655-z

IF: 2.3

2017-01-01

Applied Composite Materials

Abstract:The tensile behavior of 3D four directional cylindrical braided composite shafts was analyzed with the numerical method. The unit cell models for the 3D four directional cylindrical braided composite shafts with various braiding angles were constructed with ABAQUS. Hashin’s failure criterion was used to analyze the tensile strength and the damage evolution of the unit cells. The influence of the braiding angle on the tensile behavior of the 3D four directional cylindrical braided composite shafts was analyzed. The numerical results showed that the tensile strength along the braiding direction increased as the braiding angle decreased. These results should play an integral role in the design of braiding composites shafts.
Fatigue Behavior of 3D Braided Composites Containing an Open-Hole

Shuangqiang Liang,Qihong Zhou,Haiyang Mei,Ge Chen,Frank Ko

DOI: https://doi.org/10.3390/polym12092147

IF: 5

2020-09-21

Polymers

Abstract:The static and dynamic mechanical performances of notched and un-notched 3D braided composites were studied. The effect of longitudinal laid-in yarn was investigated in comparison with low braiding angle composites. The specimens were fatigue tested for up to millions of cycles, and the residual strength of the samples that survived millions of cycles was tested. The cross-section of the 3D braided specimens was observed after fatigue loading. It was found that the static and fatigue properties of low angle 3D braided behaved better than longitudinally reinforced 3D braided composites. For failure behavior, pure braids contain damage better and show less damage area than the braids with longitudinal yarns under fatigue loading. More cracks occurred in the 3D braided specimen with axial yarn cross-section along the longitudinal and transverse direction.

polymer science

Bone marrow subpopulations contain distinct types of endothelial progenitor cells and angiogenic cytokine-producing cells.

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Finite element analysis of 2-D tubular braided composite based on geometrical models to study mechanical performances

Investigation of parameterized braiding parameters and loading directions on compressive behavior and failure mechanism of 3D four-directional braided composites

Numerical investigation of tensile behavior of three-dimensional six-directional braided composites

Thermo-mechanical response of 3D braided composites with different braiding angles under high strain rate punch shear loading

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

Spatial distribution of yarns and mechanical properties in 3D braided tubular composites

Unit-cell geometry and mechanical properties of three-dimensional seven-directional braided composites

Finite Element Modeling of Mechanical Properties of 3D Five-Directional Rectangular Braided Composites

Mesoscale progressive damage and strength analysis of three-dimensional braided composites under tension

Meso-scopic Computing Mechanics Analysis of Three-Dimensional Multi-Directional Braided Composites

Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

Advances in Multiscale Modeling and Mechanical Properties Characterization of 3D‐Braided Composites

Parameterized meso-scale modeling and experimental study on the tensile damage evolution and strength of 3D five-directional braided composites

A multi-scale method for predicting the properties of 3D braided composite under three-point bending load

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Thermal stress distribution of multi-layered composite tubes affected by braiding angle

Damage and failure analyses of 3D4d braided composite shafts under torsional load and the effects of braid processing parameters on their torsional properties

Numerical Study on the Tensile Behavior of 3D Four Directional Cylindrical Braided Composite Shafts

Fatigue Behavior of 3D Braided Composites Containing an Open-Hole