Abstract:<p>Three-dimensional (3D) six-directional braided carbon/epoxy composites are widely used in aerospace field and this is successfully fabricated in this study. The composite is thoroughly analyzed with regard to both mechanical properties and failure mechanism in connection with the affecting factors, i.e., loading direction and temperature. At room and elevated temperatures, the in-plane compressive properties of such composites are obtained, and their failure mechanism is evaluated. A progressive damage model is established to predict the mechanical properties and to quantitatively interpret the failure behavior. At room temperature, longitudinal curve increases linearly and then drops suddenly, indicating brittle characteristics; the transverse curve is linear up to the failure point and drops gradually after the peak point. At elevated temperatures, the curves become non-linear up and the mechanical properties of composites decrease. At room temperature, the longitudinal compression presents shear fracture and shear plane exfoliation. Meanwhile, failure is observed in fiber rupture in various directions and matrix cracks. The transverse failure is observed in shear cracks and braiding fibers shedding. At elevated temperatures, 45° shear cracks are developed, the fibers are pulled out, the texture of matrix softens and exfoliates, and a noticeable debonding of the interface occurs.</p>

Comparative Investigation of Mechanical Properties between 3D Braided and Laminated Composites

An Experimental and Numerical Study of the Mechanical Properties of 3-D Braided Structural Textile Composites

Effect of Braiding Architectures on the Mechanical and Failure Behavior of 3D Braided Composites: Experimental Investigation

Experimental Investigation on Tensile Mechanical Properties of 3D Six-Directional Braided Composite

Failure Mode of Load-bearing Joints in Three-dimensional Braided Composites

Progressing in the Study on Mechanical Properties of the 3D Braided Composites

Investigation of the Tensile Properties and Failure Mechanism of Integrally-braided 5D Carbon/Phenolic Composites

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Research on Tensile Properties and Size Effect of 3D Four-Directional Braided Composites

Fatigue Behavior of 3D Braided Composites Containing an Open-Hole

Microstructure and Mechanical Properties of Three-Dimensional Five-Directional Braided Composites

Experimental Investigation on Compressive Properties for 3d Four-Directional Braided Composites

Investigation on tensile properties and size effect of 3D braided composites

Investigation on the Compressive Properties of the Three Dimensional Four-Directional Braided Composites

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Numerical Investigation on Tensile Behavior of Three-Dimensional Six-Directional Braided Composites

Unit-cell geometry and mechanical properties of three-dimensional seven-directional braided composites

EXPERIMENTAL INVESTIGATION INTO THE COMPRESSIVE MECHANICAL PROPERTIES OF THREE DIMENSIONAL BRAIDED COMPOSITES

Development of investigation into mechanical behaviour of three dimensional braided composites

Investigation on the Tensile Properties of Three-Dimensional Full Five-Directional Braided Composites

Effects of Braiding Architectures on Damage Resistance and Damage Tolerance Behaviors of 3D Braided Composites