Abstract:The direct synthesis of adipic acid from hydrogen peroxide and cyclohexene was investigated in capillary microreactors at high temperature (up to 115 degrees C) and pressure (up to 70 bar): High temperature was already applied in microflow packed-bed reactors for the direct adipic acid synthesis. In our previous work we showed that the process suffered from unavoidable gas generation due to hydrogen peroxide decomposition when working at low pressure. Herein, we used a high pressure strategy to-minimize hydrogen peroxide decomposition. Huge hotspots were observed inside a microflow packed-bed reactor under high pressure conditions. Capillary microreactors display a better heat transfer efficiency and thus may provide abetter alternative for scaling-up. Consequently, capillary microreactors were selected for the.reaction; rocess with high pressure. One assisting element is the addition of phosphoric acid which is generally known to reduce the decomposition of H2O2. The use of phosphoric acid had a positive influence on the isolated yield. We could improve-the yield further by increased interfacial mass transfer between the organic and aqueous slugs, when increasing the flow rate while keeping the same residence time. A further gain was given by using the of 2-stage temperature ramping strategy which we recently introduced for the niicroflow packed bed reactor. Applying all these aspects led to a maximum yield, of 59% at 70-115 degrees C and 70 bar. The stabilizing effect of phosphoric acid on H2O2 is more obvious in a the 2-stage temperature ramping scenario as in a single temperature operation. In addition, channel clogging by adipic acid precipitation in the microreactor was observed. Therefore, several useful strategies were proposed to prevent channel clogging at high temperature and pressure.

2- and 3-Stage temperature ramping for the direct synthesis of adipic acid in micro-flow packed-bed reactors

High Pressure Direct Synthesis of Adipic Acid from Cyclohexene and Hydrogen Peroxide via Capillary Microreactors

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

Flow Toolkit for Measuring Reaction Enthalpy and Application to Highly Exothermic Synthesis of Alkylaluminoxanes

Two-Stage Temperature Control for the Synthesis of Adipic Acid Through K/A Oil Oxidation in a Microreactor System

Improving Selectivity of Temperature-Sensitive Exothermal Reactions with Microreactor

Continuous-flow Synthesis of Di-(2-ethylhexyl) Peroxydicarbonate in a Packed-Bed Microreactor: Process Optimization and Kinetic Modeling

Introduced gas regulating fast and highly exothermic reactions with in situ gas generation in microreactors

Continuous Flowing Micro-Reactor For Aqueous Reaction At Temperature Higher Than 100 Degrees C

Effect of Stabilizer EDTA on the Thermal Hazard of Green Synthesis Process of Adipic Acid and Development of Microchannel Continuous Flow Process

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Fast Pyrolysis of Methyl Ricinoleate in an Inductively Heated Reactor Coupled with Atomization Feeding

Microdroplet Chemistry Accelerating a Three-Component Passerini Reaction for Α-Acyloxy Carboxamide Synthesis.

Kinetic Study of Hydrogen Peroxide Decomposition at High Temperatures and Concentrations in Two Capillary Microreactors

Preparation of n-Octadecane@MF resin microPCMs and its application in temperature control of esterification reactions

Synthesis of Adipic Acid Through Oxidation of K/A Oil and Its Kinetic Study in a Microreactor System

Temperature Control of Exothermic Reactions Using n-Octadecane@MF Resin microPCMs Based on Esterification Reactions

Temperature control strategy for safer and heat-efficient operations in a catalytic flow reactor

Translating High-Temperature Microwave Chemistry to Scalable Continuous Flow Processes

Modeling and Optimization for Industrial Adipic Acid Synthesis Reactors

Application of a simple rule for the design of micro- or meso-scale cooled reactors in a heat transfer limited regime