Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. After pneumatic shot peening, compressive residual stress is induced on the surface of the target, which will improve the fatigue life. During the process, surface roughness is also induced, which may reduce the fatigue life. To achieve the optimum compressive residual stress with the smallest surface roughness, the formation mechanism of the residual stress field and the surface topography are revealed. Then, pneumatic shot peening is simulated by using a discrete element method–finite element method coupled model. Based on the effects of four variables (the incident angle θ, the initial shot velocity v0, the shot radius R) and the mass flow rate rm on five parameters (the equivalent plastic strain, the equivalent stress, the surface compressive residual stress, the maximum compressive residual stress), the surface roughness is investigated. The results show that it induces a residual elastic–plastic strain after the impact of a single shot, which can form a crater and a hemispherical residual stress field. After the impact of many random shots, scattered craters connect with each other, therewith a rough and continuous surface topography is formed. Scattered residual stress fields couple with each other, and a constant residual stress layer with the compressive residual stress in the surface and the tensile residual stress in the subsurface are formed. All five parameters are determined by the residual elastic–plastic strain, which increases as the augment of the normal impact velocity, the shot mass, and the coverage rate. Along with the increase of θ and rm, these five parameters firstly increase and then decrease; with the increase of v0 and R, these five parameters increase. Therefore, reasonable values of θ, v0, R, and rm should be chosen to obtain the optimum compressive residual stress with as small surface roughness as possible.

Numerical Simulation of Stress Peen Forming with Regular Indentation

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Study on Machining Deformation of Aircraft Monolithic Component by FEM and Experiment

The numerical simulation of shot peening process with an equivalent static loading method

Numerical Simulation of Residual Stress Field Induced by Ultrasonic Shot Peening

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Simulations of the effect of shot peening backstress on nanoindentation

Numerical simulation on influencing factors of micropartical shot peening

ABAQUS Simulation of Residual Stress Induced by Waterjet Peening

Investigation of the effects of shot overlap and rigid body assumptions on surface layer characteristics in shot peening simulation

Experimental and Numerical Simulation of Sheet Bulging Induced by Laser Shock Peening

Stress wave propagation and forming mechanism of the stiffened plate by laser peening

Numerical Simulation Investigation on Machining Deformation of Aviation Thin-Walled Parts Caused by Residual Stress

Studies on residual stress and surface topography after pneumatic shot peening using discrete element method–finite element method coupled model

Numerical Modeling Design for the Hybrid Additive Manufacturing of Laser Directed Energy Deposition and Shot Peening Forming Fe–Cr–Ni–B–Si Alloy

A simulation modeling methodology considering random multiple shots for shot peening process

Numerical simulation of fine-blanking process using a mixed finite element method

Shot Stream Finite Element Model for Shot Peening Numerical Simulation and Its Experiment Study

Quantitative Modeling and Decoupling Method for Assembly Deformation Analysis Considering Residual Stress from Manufacturing Process

Spherical indentation method for estimating equibiaxial residual stress and elastic–plastic properties of metals simultaneously

Deformation measurement and simulation of Ti–6Al–4V blades induced by shot peening process