Abstract:Now 1000-kV ac ultra-high voltage transmission line has been put into operation in China, the transmission tower reaches about 70 m to 90 m high, and 30 m to 60 m wide. So, the 1000-kV transmission line has a wide lightning induced area. On the other hand, the operation voltage is very high, all these increase the probability of lightning striking UHV transmission lines. Due to insulation level of the 1000-kV transmission line is very high, so the threaten of direct lightning stroke is very small, but the high towers increase the shielding failure probability. In this paper, we proposed a numerical model to analyze the shielding failure characteristics of 1000- kV ac transmission line with the lightning leader propagation process considered, the electrical field of the system including lightning leader, transmission line and ground is solved. According to analysis results, we found if the span between two overhead ground wires of transmission line is too wide, a new phenomenon of middle-phase shielding failure takes place, the downward lightning leader of current magnitude higher than 100 kA would strike the middle phase conductor bypassing the ground wires. The middle-phase shielding failure is caused by the very high operation voltage of 1000-kV ultra-high voltage transmission line and wide designed span between two ground wires. The mechanism to generate this phenomenon is different from that of small lightning current, and the EGM can not properly explain this phenomenon. For the cat-head tower, the high shielding failure probability is caused by the middle-phase shielding failure, but for the cup tower, the shielding failure mainly takes place on the side phases. At last, the related measures to improve the lightning performances of 1000-kV ultra-high voltage transmission line are discussed. Three ground wires had been applied in the 2 km section of 1000-kV Jindongnan-Nayang transmission-line near the 1000-kV substation.

Attenuation and Deformation Characteristics of Lightning Impulse Corona Traveling along Bundled Transmission Lines

Lightning impulse corona characteristic of 1000 kv UHV transmission lines

Lightning Impulse Corona Characteristic of 1000-Kv UHV Transmission Lines and Its Influences on Lightning Overvoltage Analysis Results

Experimental Researches on Lightning Impulse Corona Characteristics of Conductors

Simulation study on transient performance of lightning over-voltage of transmission lines

Lightning Performance of Quadruple-circuit Transmission Line with Dual Voltage 500/220 Kv on the Same Tower

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Research of the Lightning Protection Performance for 220 Kv Double-Circuit Transmission Line

Study on Lightning Withstand Performance of ±500 kV DC Transmission Lines

Influence of Corona Effect on Ground Level Electrical Field under EHV/UHV AC Transmission Lines

The Effect Correlative Factors on Lightning Withstand Level of UHV A.C. Transmission Line

Lightning strike characteristics of +/- 800-kV DC UHV transmission lines

Simulation and Analysis of Lightning Overvoltage of 10 kV Cable on the Bridge of High-speed Railroad

Experimental study on corona environment effects of 1000-kV ac UHV transmission lines

Analysis of Lightning Shielding Failure Proof Level of UHV Transmission Lines Considering Corona Influences

Corona characteristic of power equipments used in ±1000 kV UHV DC system

Lightning shielding failure analysis of 1000-kV ultra-high voltage ac transmission line

Experimental Study on Impulse Corona Characteristics of HVDC Conductors with Space Charges

Experimental study of transients and electrical fields caused by lightning flashover in the uhvdc converter station

Modeling Lightning Performance of Transmission Systems Using PSCAD

Study on the Influence of the DC Voltage on the Upward Leader Emerging from a Transmission Line