Abstract:Machining quality of spray holes directly affects injection performance and combustion efficiency of diesel engines. With the high standards of less emission and fuel economy, the spray holes used in the case of high injection pressure require the characters of small diameter <Phi 300 mu m, thick wall >1 mm, multi-holes >4, micro-taper shape with K-factor 0-2 and multidimensional space position. Mechanical drilling is difficult to meet the machining requirements of the spray holes. Micro electro discharge machining (EDM) has the advantages of less cutting force, without burrs, and even finish machining after heat treatment, so it fits for machining micro holes on metal alloy materials. In this study, a micro EDM equipment was developed for drilling the spray holes. Key technologies were discussed including an electrode feed head, a workpiece positioning mechanism and process control methods. In order to machine micro-taper holes and improve processing efficiency, the electrode feed head was designed with the special multifunction modules of a novel taper-swinging mechanism (TSM), a piezoelectric (PZT) actuator for assisting high-frequency vibration, and a dual-clamps inchworm mechanism for wear compensation of wire tool electrode. The equipment can achieve the spatial positions of pitch angle, roll angle, focal distance, and reference points of nozzles. The particular attention was also given to the proposed process control methods to ensure high consistency accuracy in machining multi-nozzles. In addition, performance tests and applied experiments were carried out. The study results show that the equipment can meet the machining requirements of the spray holes with diameters Phi 140-300 mu m, taper-angles 0-1.3 degrees (K-factor 0-2.3) with adjustment error <0.037 degrees, space accuracy <0.2 degrees, dimensional accuracy +/- 2 mu m and machining-feed efficiency of 1.5 mm/min. Crown Copyright (c) 2012 Published by Elsevier Inc. All rights reserved.

Precision machining of micro tool electrodes in micro EDM for drilling array micro holes

Precision EDM of Micron-Scale Diameter Hole Array Using in-Process Wire Electro-Discharge Grinding High-Aspect-Ratio Microelectrodes

Servo scanning 3D micro EDM for array micro cavities using on-machine fabricated tool electrodes

Design of a Micro-hole EDM Tool and its Machining Experiments

Research on Micro EDM Machine Tool for Machining Micro Array Holes

Microelectrode Array Fabrication by Micro-Wedm

Micro-milling/micro-EDM Combined Processing Technology for Complex Microarray Cavity Fabrication

Fabrication of High-Accuracy Micro-Holes in Micro-Edm under Tool Electrode Spiral Motion Feed Mode Combined with Fixed Reference Axial Compensation

Micro Electro Machining Technologies for Industrial Application

Noncircular Tool Fabrication by WEDG Using Electrode Jump Motion and Noncircular Array Holes Drilling

Micro Electrochemical Machining of Array Micro-Grooves Using In-Situ Disk Electrode Fabricated by Micro-WEDM

Fabrication of Microelectrode with Large Aspect Ratio and Precision Machining of Micro-Hole Array by Micro-Edm

Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles

Tangential feeding in precision EDM grinding

Research on a Micro-EDM System and Its Techniques

A novel EDM method using longitudinal-torsional ultrasonic vibration (LTV) electrodes to improve machining performance for micro-holes

Desktop Micro-EDM System for High-Aspect Ratio Micro-Hole Drilling in Tungsten Cemented Carbide by Cut-Side Micro-Tool

Precision machining of high aspect-ratio rotational part with wire electro discharge machining

The Electrochemical Micromachining Based on Multifunction Tool for Micromachining

Wire electro-discharge grinding (WEDG) and its application

Study on Micro-EDM Process of Array Micro-holes Using Deionized Water as Working Fluid