Abstract:Machining quality of spray holes directly affects injection performance and combustion efficiency of diesel engines. With the high standards of less emission and fuel economy, the spray holes used in the case of high injection pressure require the characters of small diameter <Phi 300 mu m, thick wall >1 mm, multi-holes >4, micro-taper shape with K-factor 0-2 and multidimensional space position. Mechanical drilling is difficult to meet the machining requirements of the spray holes. Micro electro discharge machining (EDM) has the advantages of less cutting force, without burrs, and even finish machining after heat treatment, so it fits for machining micro holes on metal alloy materials. In this study, a micro EDM equipment was developed for drilling the spray holes. Key technologies were discussed including an electrode feed head, a workpiece positioning mechanism and process control methods. In order to machine micro-taper holes and improve processing efficiency, the electrode feed head was designed with the special multifunction modules of a novel taper-swinging mechanism (TSM), a piezoelectric (PZT) actuator for assisting high-frequency vibration, and a dual-clamps inchworm mechanism for wear compensation of wire tool electrode. The equipment can achieve the spatial positions of pitch angle, roll angle, focal distance, and reference points of nozzles. The particular attention was also given to the proposed process control methods to ensure high consistency accuracy in machining multi-nozzles. In addition, performance tests and applied experiments were carried out. The study results show that the equipment can meet the machining requirements of the spray holes with diameters Phi 140-300 mu m, taper-angles 0-1.3 degrees (K-factor 0-2.3) with adjustment error <0.037 degrees, space accuracy <0.2 degrees, dimensional accuracy +/- 2 mu m and machining-feed efficiency of 1.5 mm/min. Crown Copyright (c) 2012 Published by Elsevier Inc. All rights reserved.

Research on Micro Array Holes Machining by Combined EDM with Stamping

Servo scanning 3D micro EDM for array micro cavities using on-machine fabricated tool electrodes

Micro-EDM of micro-stepped hole based on the wear of micro-bit

Micro Electro Machining Technologies for Industrial Application

Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles

A study of micro-EDM and micro-ECM combined milling for 3D metallic micro-structures

Array Servo Scanning Micro EDM of 3D Micro Cavities

Research on Ecm Process of Micro Holes with Internal Features

Precision EDM of Micron-Scale Diameter Hole Array Using in-Process Wire Electro-Discharge Grinding High-Aspect-Ratio Microelectrodes

Design of a Micro-hole EDM Tool and its Machining Experiments

Research On Micro Ecm Using Micro Array Electrode

Scanning Micro-Electrochemical Machining Process for V-Shaped Grooves

EDM Drilling Process of Micro Tapered Holes by Online Control of Machining Parameters

Precision machining of micro tool electrodes in micro EDM for drilling array micro holes

Research on the Key Technologies of Micro Electro Discharge Machining

Applying punching without die to micro-hole array processing

Research on Drilling Taper Holes of Fuel Jet Nozzles by Micro EDM

Micro Array Hole Formation in Glass Using Electrochemical Discharge Machining

A novel EDM method using longitudinal-torsional ultrasonic vibration (LTV) electrodes to improve machining performance for micro-holes

Mechanism Design for Micro EDM Drilling of Negative Tapered Holes and its Experiments

Feasibility Study of Deep Micro Slit Making by Micro EDM with Flat Electrode