Abstract:Chemical mechanical polishing slurry of copper usually contains more than four compositions, in which strong acids, alkalis or hazardous chemicals are normally employed. With these slurries, surface roughness less than 1 nm is difficult to obtain on the surface of copper after chemical mechanical polishing. It is a challenge to develop a kind of novel chemical mechanical polishing slurry for copper including three environment friendly compositions. In this study, a kind of novel chemical mechanical polishing slurry is developed consisting of silica, hydrogen peroxide and chitosan oligosaccharide, where all the three compositions are environment friendly. After chemical mechanical polishing, surface roughness Ra and peak-to-valley values are 0.444 and 5.468 nm respectively. Chemical mechanical polishing mechanism is elucidated by infrared and X-ray photoelectron spectra and electrochemical measurements. Firstly, Cu surface is oxidized by hydrogen peroxide, forming CuO and Cu(OH)2. Then, CuO and Cu(OH)2 are dissolved by H+ ions released by the ionization of chitosan oligosaccharide. Subsequently, Cu2+ ions are chelated by chitosan oligosaccharide molecules. Finally, the adsorbed layer is removed by silica nanospheres, generating ultra-smooth surface of copper. The findings propose a new route for fabrication devices of copper and other transition metals used in integrated circuits, graphene, transformers, batteries and electronics industries.

Electrogenerated Chemical Polishing of Copper

Effect of Cupric Ion Concentration on the Etching Behavior of Copper in Electrogenerated Chemical Polishing (EGCP)

Analysis of the Polishing Ability of Electrogenerated Chemical Polishing

Electrogenerated chemical polishing method

Two-Step Electrochemical Mechanical Polishing of Pure Copper

On the Reaction Mechanism of a Hydroxyethylidene Diphosphonic Acid-Based Electrolyte for Electrochemical Mechanical Polishing of Copper

Electrochemical Mechanical Polishing of Copper with High Permittivity Abrasives

Dry electrochemical polishing of copper alloy in a medium containing ion-exchange resin

Electrolyte Composition and Removal Mechanism of Cu Electrochemical Mechanical Polishing

Material Removal and Surface Modification of Copper under Ultrasonic-Assisted Electrochemical Polishing

Research on the Copper Electrochemical Polishing in Phosphoric Acid

An Efficient Electrochemical Polishing Method with Planarization Ability Employing Solid and Liquid Electrolytes

A new polishing method for complex structural parts: moist particle electrolyte electrochemical mechanical polishing (MPE-ECMP)

Chemical processes in the chemical mechanical polishing of copper

Electrochemical Characteristic of Chemical-Mechanical Polishing of Copper with Oxide Passive Film

Experimental and Computational Investigation of Complexing Agents on Copper Dissolution for Chemical Mechanical Polishing Process

Environment-friendly chemical mechanical polishing for copper with atomic surface confirmed by transmission electron microscopy

Preparation of Flat and Smooth Copper Surface by Jet Electrochemical Machining and Electrochemical Polishing

Principles and Applications of Electrochemical Polishing

Environment friendly chemical mechanical polishing of copper

Electrolyte Composition and Galvanic Corrosion for Ruthenium/copper Electrochemical Mechanical Polishing