Abstract:In this paper, in order to analyze the oxidation, dissolution and corrosive inhibition effects of additives in the slurry for copper Chemical-mechanical polishing(CMP), the slurry(pH5) with the peroxide as an oxidant, the citric acid as a complexing agent and the benzotriazole(BTA) as an inhibitor is studied. The static etching rate and polishing rate of the Cu-H2O2-Citric acid-BTA slurry are measured. The electrochemical behavior involved in the dissolution and corrosive inhibition of copper in the solutions containing additives is investigated by the electrochemical impedance spectroscopy (EIS) studies. The surface roughness is measured using ZYGO 3-D surface profiler. It is observed that when the slurry is with only 5wt% peroxide existing, copper is stable and slight etching rate on the copper is produced, and the etching rate is only 8.7nm/min. When 0.6wt% citric acid presents after adding 5wt% hydrogen peroxide, the etching rate will increase by 5.3 times, with a blue complexing product emerging. When the inhibitor BTA is added, the corrosion will be effectively restrained. From the EIS results, the impedance of copper in 5wt% peroxide solution which is in passivation can be greatly decreased by adding the citric acid as a complexing reagent. And the impedance of copper in the solution containing peroxide and citric acid can be increased by the addition of BTA. The surface roughness of the wafer polished with the slurry of 5wt% peroxide+0.6wt% citric acid+0.12wt% BTA slurry is Ra 4.7 Å.

Research on the Copper Electrochemical Polishing in Phosphoric Acid

An In-Situ Study of Copper Electropolishing in Phosphoric Acid Solution

Dry electrochemical polishing of copper alloy in a medium containing ion-exchange resin

Effect of Cupric Ion Concentration on the Etching Behavior of Copper in Electrogenerated Chemical Polishing (EGCP)

Chemical Mechanical Polishing of Copper in Organic Phosphonic Acid System Slurry

Electrogenerated Chemical Polishing of Copper

Electrochemical Characteristic of Chemical-Mechanical Polishing of Copper with Oxide Passive Film

On the Reaction Mechanism of a Hydroxyethylidene Diphosphonic Acid-Based Electrolyte for Electrochemical Mechanical Polishing of Copper

Effect of pH on Material Removal Rate of Cu in Abrasive-Free Polishing

Electrolyte Composition and Removal Mechanism of Cu Electrochemical Mechanical Polishing

Analysis of the Polishing Ability of Electrogenerated Chemical Polishing

Experimental and Computational Investigation of Complexing Agents on Copper Dissolution for Chemical Mechanical Polishing Process

Corrosion electrochemical mechanism of chemical mechanical polishing of copper in K3Fe(CN)(6) solution

Material Removal and Surface Modification of Copper under Ultrasonic-Assisted Electrochemical Polishing

A quantitative study of removal mechanism of copper polishing based on a single pad-asperity polishing test

Electrochemical Mechanical Polishing of Copper with High Permittivity Abrasives

Electrochemical Polishing of 7075 Al Alloy in Phosphoric Acid

Two-Step Electrochemical Mechanical Polishing of Pure Copper

Copper chemical mechanical polishing using a slurry-free technique

Research on Effects of Slurry Additives in Cucmp for Ulsi Manufacturing