Abstract:The effects of corona-generated space charge on the resultant electric field near a conductor were determined both for a simulated test line and a corona cage, since both are used in predicting the corona behavior of EHV and UHV transmission lines. Programs were developed for the calculation of the potential, the electric field and the space charge distributions for a simulated test line and a corona cage. Algorithms based on the charge simulation and the finite-element methods were used to solve Poisson's equation; and the method of characteristics to solve the current continuity equation. The resultant electric field on the ground plane of the two configurations was measured with a rotating field-mill, and the results fitted well with the calculated data. It was found the electric field at the surface of the conductor increased linearly, for both experimental configurations, before the voltage reached the corona inception value; but was reduced once corona-generated space charge was produced. The space charge and density distribution in the corona cage differed greatly from that around the test line: the electric field at the surface of the conductor in the test line decreased faster with voltage than that in the corona cage, the relative difference increasing as V-app/V-on was raised. The difference reached an asymptote of about 16% when the applied voltage was about 25% above the corona inception level.

Measurement of Positive Direct Current Corona Pulse in Coaxial Wire-Cylinder Gap

Evaluation of Pulse Voltage Generators

Current-voltage Characteristics of Dc Corona Discharges in Air Between Coaxial Cylinders

Measurements of Flow Field in Wire-plate Electrostatic Precipitator During Positive or Negative Corona Discharge Using PIV Method

Influence of Wave Propagation Process on Measurement of Corona Current

Transient Responses Of Coaxial Cables In An Electrically Large Cabin With Slots And Windowns Illuminated By An Electromagnetic Pulse

The Measurement Method for Corona Discharge Current Under High-Voltage Environment

Modelling and Calculation of Negative DC Corona Plasma in Coaxial Cylindrical Electrode

Specific characteristics of negative corona currents generated in short point-plane gap

A Comprehensive Numerical Model of Steady-State Negative Corona for Coaxial Cylindrical Electrode in Atmosphere Air

Electric field measurements under DC corona discharges in ambient air by electric field induced second harmonic generation

A Full Hydrodynamic Steady-State Model of Positive Dc Corona in Coaxial Cylindrical Electrode

Resultant Electric Field Gradient and Ion Current in DC Corona Cage Solved by the FEM Method

Time-domain Performance of Audible Noise for Positive Dc Corona: Numerical Simulations and Measurements

Measuring DC Corona Inception and Extinction Voltage by Pulse Counts Using UV Corona Monitor

Corona-generated Space Charge Effects on Electric Field Distribution for an Indoor Corona Cage and a Monopolar Test Line

Measurement Methods for DC Conductor Corona Onset Voltage in the Corona Cage

Experimental Study on Impulse Corona Characteristics of HVDC Conductors with Space Charges

Temperature Sensitivity of Voltage-Current Characteristics for Positive Corona in Coaxial Cylindrical Electrode

Optical Micro-current Transducer for the Measurement of Corona Discharge Current under High Voltage Environment

Statistical characteristic in time-domain of direct current corona-generated audible noise from conductor in corona cage