Abstract:This paper proposes an analytical solution for DC negative corona discharge in a wire-cylinder device based on experimental results in which both the corona and drift regions are considered; this approach aims to provide a theoretical method for analyzing electrostatic precipitation at high temperatures. The inter-electrode space is divided into three zones, namely, the ionization layer, the attachment layer (corona region) and the drift region, to investigate the space charge concentration and the electric field distribution. The boundary of the ionization layer is assumed to be the radius at which the rate of ionization balances that of electron attachment. The radius where the value of E/N equals 110 Td is recommended as the boundary of the attachment layer. It was determined that an increasing temperature leads to a decrease in the largest space charge number density and the largest electric field in the drift region that can be provided by a discharging device. With respect to the device in the present work, when the temperature increases from 350 degrees C to 850 degrees C, the largest electric field decreases from similar to 9 x 10(6) V/m to similar to 3 x 10(6) V/m, and the largest charge number density decreases from similar to 1.3 x 10(15) m(-3) to 6.4 x 10(14) m(-3) The radius of the corona region, the space charge number density and the electric field increase as the applied voltage increases at a given temperature. For example, at a temperature of 550 degrees C, when the applied voltage increases from 10,500 V to 18,879 V, the radius of the corona region increases from similar to 2.9 mm to similar to 4.9 mm. It appears to be unreasonable to use a constant value that is calculated from Peek's formula as the electric field at the surface of the cathode under all of the conditions. (C) 2014 Elsevier B.V. All rights reserved.

Temperature Sensitivity of Voltage-Current Characteristics for Positive Corona in Coaxial Cylindrical Electrode

Current-voltage Characteristics of Dc Corona Discharges in Air Between Coaxial Cylinders

A Comprehensive Numerical Model of Steady-State Negative Corona for Coaxial Cylindrical Electrode in Atmosphere Air

Evaluation of Pulse Voltage Generators

A Full Hydrodynamic Steady-State Model of Positive Dc Corona in Coaxial Cylindrical Electrode

Modelling and Calculation of Negative DC Corona Plasma in Coaxial Cylindrical Electrode

An Analytical Method for DC Negative Corona Discharge in a Wire-Cylinder Device at High Temperatures

Current analysis of DC negative corona discharge in a wire-cylinder configuration at high ambient temperatures

Measurement of Positive Direct Current Corona Pulse in Coaxial Wire-Cylinder Gap

Inception Threshold Conditions for Positive Dc Corona in a Rod-Plane Electrode at Low Atmospheric Temperatures

Characteristics of Negative DC Corona Discharge in a Wire–plate Configuration at High Temperatures

Self-Sustained Criterion with Photoionization for Positive Dc Corona Plasmas Between Coaxial Cylinders

Effects of Air Pressure and Humidity on the Characteristics of Negative DC Corona

Ion Flow Effects on Negative Direct Current Corona in Air

On the Potential Impacts of Extreme Low Temperature on Threshold Inception Characteristics of Negative Corona Discharge

Optical Micro-current Transducer for the Measurement of Corona Discharge Current under High Voltage Environment

Key Factors Affecting the Corona Onset Voltage of Electrostatic Precipitator Electrodes

The Measurement Method for Corona Discharge Current Under High-Voltage Environment

Onset Criterion for Positive Corona in Air

Influence of Humidity on the Characteristics of Positive Corona Discharge in Air

Comparison of Direct Current and 50 Hz Alternating Current Microscopic Corona Characteristics on Conductors