Abstract:This paper proposes an analytical solution for DC negative corona discharge in a wire-cylinder device based on experimental results in which both the corona and drift regions are considered; this approach aims to provide a theoretical method for analyzing electrostatic precipitation at high temperatures. The inter-electrode space is divided into three zones, namely, the ionization layer, the attachment layer (corona region) and the drift region, to investigate the space charge concentration and the electric field distribution. The boundary of the ionization layer is assumed to be the radius at which the rate of ionization balances that of electron attachment. The radius where the value of E/N equals 110 Td is recommended as the boundary of the attachment layer. It was determined that an increasing temperature leads to a decrease in the largest space charge number density and the largest electric field in the drift region that can be provided by a discharging device. With respect to the device in the present work, when the temperature increases from 350 degrees C to 850 degrees C, the largest electric field decreases from similar to 9 x 10(6) V/m to similar to 3 x 10(6) V/m, and the largest charge number density decreases from similar to 1.3 x 10(15) m(-3) to 6.4 x 10(14) m(-3) The radius of the corona region, the space charge number density and the electric field increase as the applied voltage increases at a given temperature. For example, at a temperature of 550 degrees C, when the applied voltage increases from 10,500 V to 18,879 V, the radius of the corona region increases from similar to 2.9 mm to similar to 4.9 mm. It appears to be unreasonable to use a constant value that is calculated from Peek's formula as the electric field at the surface of the cathode under all of the conditions. (C) 2014 Elsevier B.V. All rights reserved.

A Comprehensive Numerical Model of Steady-State Negative Corona for Coaxial Cylindrical Electrode in Atmosphere Air

A Full Hydrodynamic Steady-State Model of Positive Dc Corona in Coaxial Cylindrical Electrode

Modelling and Calculation of Negative DC Corona Plasma in Coaxial Cylindrical Electrode

Numerical Investigation on Local Non-equilibrium Flows Using a Diatomic Nonlinear Constitutive Model

A model for photoionization produced by negative corona plasma in air

Current-voltage Characteristics of Dc Corona Discharges in Air Between Coaxial Cylinders

Ion Flow Effects on Negative Direct Current Corona in Air

Numerical Simulation on Transition from Positive Glow Discharge to Streamer Discharge

Numerical Analysis of the Micro-Couette Flow Using a Non-Newton–fourier Model with Enhanced Wall Boundary Conditions

Numerical model of negative DC corona inception voltage of stranded conductors

Analytical model of electro-hydrodynamic flow in corona discharge

Surface Electric Field for Negative Corona Discharge in Atmospheric Pressure Air

Temperature Sensitivity of Voltage-Current Characteristics for Positive Corona in Coaxial Cylindrical Electrode

A Numerical Model of Acoustic Wave Caused by a Single Positive Corona Source

Numerical analysis of discharge gap related fluctuations in a cylindrical positive discharge corona

Resultant Electric Field Gradient and Ion Current in DC Corona Cage Solved by the FEM Method

Effects of Air Pressure and Humidity on the Characteristics of Negative DC Corona

Self-Sustained Criterion with Photoionization for Positive Dc Corona Plasmas Between Coaxial Cylinders

Analysis of Corona Initiation Characteristics of Suspended Conductor

Numerical Simulation of Electrode Configuration of Corona Coupling Silent Discharge Structure

An Analytical Method for DC Negative Corona Discharge in a Wire-Cylinder Device at High Temperatures