Abstract:The applicability of chemical actinometry to characterize the fluence in UV reactors with reflections, non-parallel light, and variable water transmittance is limited due to the unknown effective path length or hydraulic shortcuts within the reactor. In this study, the effects of reflection and transmittance on actinometry were examined and a new, optimized and easy method for determining fluence was developed. KI/KIO3 and uridine actinometry experiments were carried out under controlled conditions using a collimated beam apparatus and a completely mixed batch reactor with or without diffuse reflection and compared to biodosimetry results. Whereas optically opaque actinometers such as KI/KIO3 are not directly capable of predicting the fluence of reflecting reactors, the results of uridine actinometry are influenced by reflection and transmission. To precisely predict the fluence rate in UV reactors with uridine, knowledge about the effective optical path length of the light is needed. Here, an existing method to mathematically calculate the optical path length was adopted and optimized for uridine actinometry. Results for average fluence were validated by biodosimetry using MS2 phages under different degrees of reflection and transmission. It could be shown that by modifying the bottom of the reactor with diffusely reflecting polytetrafluoroethylene foil, the fluence rate was increased by a factor of approximately 2.6 and the path length by factor of 2.4. When only half of the bottom was covered with reflective foil, fluence rate increased by a factor of 1.8 and path length by 1.8. Although this new approach cannot replace biodosimetry, to predict the fluence distribution received by microorganisms, it can provide means to characterize more complex reactor designs, validate results of advanced reactor modeling, and quantify fluence for non-parallel irradiation and reflective light, especially for the application of high fluence (e.g., advanced oxidation processes), where biodosimetry may be too sensitive. Further, comparing the fluence obtained with actinometry to the results of biodosimetry might qualitatively indicate hydraulic short cuts or unideal fluence distributions for flow-through reactors.

Improved Method for Real-Time Fluence Monitoring in UV Reactors

Development of Monitored Tunable Biodosimetry for Fluence Validation in an Ultraviolet Disinfection Reactor

Numerical Verification for a New Type of UV Disinfection Reactor

Estimating the Fluence Delivery in UV Disinfection Reactors Using a ‘Detector-Model’ Combination Method

Revealing photon transmission in an ultraviolet reactor: Advanced approaches for measuring fluence rate distribution in water for model validation

A review of the fluence determination methods for UV reactors: Ensuring the reliability of UV disinfection

Experimental Assessment of Photon Fluence Rate Distributions in a Medium-Pressure UV Photoreactor.

An actinometric method to characterize performance of reflecting UVC reactors used for water treatment

Impact of Inner-Wall Reflection on UV Reactor Performance As Evaluated by Using Computational Fluid Dynamics: the Role of Diffuse Reflection.

In-Line Uranium Monitoring in Reprocessing Waste Solution by Time-Resolved Laser-Induced Fluorometry

Comparison of theoretical computation and bioassays of UV intensity distribution in an ultraviolet disinfection reactor

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

A Mini-Fluidic UV Photoreaction System for Bench-Scale Photochemical Studies

Developing LED UV Fluorescence Sensors for Online Monitoring DOM and Predicting DBPs Formation Potential During Water Treatment

Efficiency improvement of a flow-through water disinfection reactor using UV-C light emitting diodes

Detailed Modelling of Ultraviolet Radiation (UV) from the Interaction of Multiple Lamps in Reactors, using Radiative Transfer Techniques

The method to measure the UV emittance of low-pressure-lamps: a commentary on

Online control of UV and UV/H2O2 processes targeted for the removal of contaminants of emerging concern (CEC) by a fluorescence sensor

Real-Time Quantitative Detection of Ultraviolet Radiation Dose Based on Photochromic Hydrogel and Photo-Resistance

Application of Optical Instrumentations to Reactor Dosimetry for Material Irradiation Study

Keitz Method for Measuring of 254 Nm Radiant Flux in Low Pressure Mercury Lamps