Abstract:The applicability of chemical actinometry to characterize the fluence in UV reactors with reflections, non-parallel light, and variable water transmittance is limited due to the unknown effective path length or hydraulic shortcuts within the reactor. In this study, the effects of reflection and transmittance on actinometry were examined and a new, optimized and easy method for determining fluence was developed. KI/KIO3 and uridine actinometry experiments were carried out under controlled conditions using a collimated beam apparatus and a completely mixed batch reactor with or without diffuse reflection and compared to biodosimetry results. Whereas optically opaque actinometers such as KI/KIO3 are not directly capable of predicting the fluence of reflecting reactors, the results of uridine actinometry are influenced by reflection and transmission. To precisely predict the fluence rate in UV reactors with uridine, knowledge about the effective optical path length of the light is needed. Here, an existing method to mathematically calculate the optical path length was adopted and optimized for uridine actinometry. Results for average fluence were validated by biodosimetry using MS2 phages under different degrees of reflection and transmission. It could be shown that by modifying the bottom of the reactor with diffusely reflecting polytetrafluoroethylene foil, the fluence rate was increased by a factor of approximately 2.6 and the path length by factor of 2.4. When only half of the bottom was covered with reflective foil, fluence rate increased by a factor of 1.8 and path length by 1.8. Although this new approach cannot replace biodosimetry, to predict the fluence distribution received by microorganisms, it can provide means to characterize more complex reactor designs, validate results of advanced reactor modeling, and quantify fluence for non-parallel irradiation and reflective light, especially for the application of high fluence (e.g., advanced oxidation processes), where biodosimetry may be too sensitive. Further, comparing the fluence obtained with actinometry to the results of biodosimetry might qualitatively indicate hydraulic short cuts or unideal fluence distributions for flow-through reactors.

Detailed Modelling of Ultraviolet Radiation (UV) from the Interaction of Multiple Lamps in Reactors, using Radiative Transfer Techniques

Numerical Verification for a New Type of UV Disinfection Reactor

In Situ Detailed Fluence Rate Distributions in a UV Reactor with Multiple Low-Pressure Lamps: Comparison of Experimental and Model Results

Revealing photon transmission in an ultraviolet reactor: Advanced approaches for measuring fluence rate distribution in water for model validation

Radiation modeling of microplasma UV lamps for design analysis and optimization

Development and modeling of a novel type of photoreactors with exterior ultraviolet (UV) reflector for water treatment applications

Development of Monitored Tunable Biodosimetry for Fluence Validation in an Ultraviolet Disinfection Reactor

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Use of P-1 model with the additional source term for numerical simulation of ultraviolet radiation in a photoreactor

Impact of Reflection on the Fluence Rate Distribution in a UV Reactor with Various Inner Walls As Measured Using a Micro-Fluorescent Silica Detector.

Experimental Assessment of Photon Fluence Rate Distributions in a Medium-Pressure UV Photoreactor.

Numerical Simulation of a UV-PCO Plate Reactor

Comparison of radiant intensity in aqueous media using experimental and numerical simulation techniques

Comprehensive Adsorption and Irradiation Modelling of LED Driven Photoreactor for H2 Production

Impact of Inner-Wall Reflection on UV Reactor Performance As Evaluated by Using Computational Fluid Dynamics: the Role of Diffuse Reflection.

UV-based Advanced Oxidation Processes in Photoreactors with Reflective Sleeves

Estimating the Fluence Delivery in UV Disinfection Reactors Using a ‘Detector-Model’ Combination Method

Design-simulation of Light Radiation of a Novel Fixed-Bed Photocatalytic System with LED Arrays on the Engineering-Outlook

An actinometric method to characterize performance of reflecting UVC reactors used for water treatment

Effect of UV-C LED arrangement on the sterilization of Escherichia coli in planar water disinfection reactors

A novel ultraviolet light source of microwave discharge electrodeless ultraviolet lamp: Luminescence mechanisms, reactor structures, and environmental applications