Abstract:Abstract The tribological properties of gear interface have been widely concerned in the past decades. In this study, based on the local involute profile and crown modification, a thermal elastohydrodynamic lubrication model is proposed for a helical gear pair. To discuss the influences of dynamic load on the tribological properties of helical gear pair, the dynamic mesh force of tooth surface is obtained by torsional vibration model. The influences of working conditions and surface roughness on the tribological properties of helical gear pair are investigated. The tribological properties are evaluated in terms of the average film thickness, friction coefficient, mechanical power loss etc. Results show that the dynamic effect of gears has a significant effect on the tribological properties, especially at a specific speed, such as resonance speed. In order to simulate gear lubrication accurately, it is recommended to adopt local involute tooth profile and consider tooth profile modification to calculate geometric clearance. The influence of input rotation speed on the dynamic characteristics and tribological properties of gear is more significant than that of input torque. The surface roughness significantly changes the distribution of interface pressure and film thickness. With the increase of roughness amplitude, the local fluctuation amplitude of pressure and film thickness increase and the dry contact occurs at the end of contact line. Meanwhile, the maximum subsurface stress moves toward the tooth surface, especial for the high frequency engineering roughness. This local stress concentration is harmful to the fatigue life of gear meshing process.

Tribological Assessment of Sliding Pairs under Damped Harmonic Excitation Loading Based on On-Line Monitoring Methods

Tribology Assessment of Surface-Contact Sliding Pairs with Streak Defect under Dynamic Harmonic Excitation Loading

Friction and Wear On-Line Monitoring and Wear Mechanism Analysis under Dynamic Loading Manners

Investigation of Normal Dynamic Contact Stiffness and Damping Characteristics in Mixed Lubrication for Non-Gaussian Rough Surfaces

Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy

Tribological properties of dual-freedom sliding roller pairs with a loss of lubrication

The Contact Behavior Analysis Between Microcomponents on a Low-Frequency Reciprocating-Fretting Ball-on-Flat Tribometer

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Wear Characterization under Sliding–rolling Contact Using Friction-Induced Vibration Features

Numerical Investigation of the Tribological Performance of Micro-Dimple Textured Surfaces under Hydrodynamic Lubrication

Experimental research of sliding friction coefficient of rough surface under lubricated point contact

Lubrication Performance of Helical Gear Pair Under Dynamic Load Based on Local Involute Profile

Assessment of Surface Wear Properties with Initial Macro Crack Defects Using On-Line Visual Ferrography and Sem Methods

A Two-Disk Test Rig for Researching the Damage Behavior of Rolling/Sliding Contact Surfaces under Extreme Conditions

Tribological investigation of a low-frequency reciprocating platform

Experimental Study of the Effect of Surface Texturing on the Lubrication Performance in Point Contacts

Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions

Experimental Study of Tribological Performance on Silicon Micro-textured Surface

Study of the Friction and Wear of Dimple Textured Surfaces Based on Mixed Elastohydrodynamic Lubrication

Impact Analysis of Worn Surface Morphology on Adaptive Friction Characteristics of the Slipper Pair in Hydraulic Pump

A Mixed Lubrication Model for Studying Tribological Behaviors of Surface Texturing