Abstract:Purpose - The nonlinear friction disturbance of the moving joint surface of the feed system can lead to the residual vibration of the system, prolong the stability time of the system and reduce the motion precision and machining precision of the machine tool. This paper aims to concern the vibration between joint surfaces caused by nonlinear friction. Design/methodology/approach - The model is established from the micro and macro scale based on the LuGre model. The friction characteristics of the moving joint surface are explored. The friction experiment of GCr15 pin and 45 steel disk is designed and the influence of lubrication condition, speed, acceleration and normal load on friction characteristics are studied. Findings - Among the drive speed, damping and stiffness, the negative gradient effect of friction, which is characterized by the difference of static and dynamic friction coefficient Delta mu, is the main cause of friction vibration between moving joint surfaces. Sufficient lubrication, a proper increase of speed and acceleration, a reasonable reduction of normal load can reduce the negative gradient effect, which can weaken the vibration caused by the nonlinear friction and improve the friction characteristics of the moving joint surface. Originality/value - In the past studies, more attention has been paid to revealing the relationship between the relative speed and friction, while the acceleration is often ignored. The negative gradient effect of friction is improved in this paper by changing the contact conditions. Research findings of this paper effectively improve the friction characteristics of the moving interface and provide the basis for restraining the nonlinear vibration between the moving interfaces. Peer review - The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2019-0476/

Investigation of Normal Dynamic Contact Stiffness and Damping Characteristics in Mixed Lubrication for Non-Gaussian Rough Surfaces

Study on normal contact stiffness characteristics in non-Gaussian rough surfaces under mixed lubrication

Normal and Tangential Contact Models for Mixed Lubrication of Mechanical Interface

Evaluating the contact model for anisotropic non-Gaussian roughness in mixed lubrication regime

Investigation into the Normal Contact Stiffness of Rough Surface in Line Contact Mixed Elastohydrodynamic Lubrication

Study on the normal contact stiffness of the fractal rough surface in mixed lubrication

STUDY ON THE NORMAL CONTACT STIFFNESS OF ROUGH SURFACE IN MIXED LUBRICATION

Analysis of the Rolling Interface Contact Characteristics in Mixed Lubrication Based on Gaussian Distribution Theory

Research on Mixed Lubrication Problems of the Non-Gaussian Rough Textured Surface With the Influence of Stochastic Roughness in Consideration

Friction characteristics of moving joint surface from the micro and macro scale

Modeling of Normal Contact Stiffness for Surface with Machining Textures and Analysis of Its Influencing Factors

Research on Macro-Mesoscopic Normal Dynamic Characteristics of Sliding Joint Surface

Experimental Study on Normal Dynamic Contact Stiffnesses of Trail Interfaces under Lubrications

The Influence of Surface Topography on Mixed Plasto-Elastohydrodynamic Lubrication in Point Contacts

Measurement and Modeling of Normal Contact Stiffness and Contact Damping at the Meso Scale

Contact Stiffness of Rough Mechanical Joint Surface

Analysis, Modeling and Experimental Study of the Normal Contact Stiffness of Rough Surfaces in Grinding

Research on Dynamic Characteristics of Oil-Bearing Joint Surface in Slide Guides

Prediction of the Normal Contact Stiffness Between Elastic Rough Surfaces in Lubricated Contact Via an Equivalent Thin Layer

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials