Abstract:Surface texture and titanium nitride (TiN) coating have been established as effective methods for enhancing the tribological property of mechanical friction pairs. This study aims to investigate the tribological performance of dimple-textured surfaces with TiN coating under oil-lubricated conditions using a pin-on-disc wear experiment. Four types of pin samples with various end surfaces were designed, including bare rod samples, TiN-coated samples, textured samples, and TiN-coated/textured samples. The surface texture consists of a series of cylindrical micro-dimples with a diameter of 150 μm and a depth of 40 μm fabricated on the end surface of the pin. TiN coating treatment on the textured surface of the end face was performed by vacuum sputtering coating equipment. The study focuses on measuring and comparatively analyzing the friction coefficient, wear morphology, and binding force of the pin-disc friction pairs among the experiments. Compared with bare rod samples, TiN-coated/textured samples will reduce the friction coefficient (COF) of the pin-on-disc friction pair by at least 20% under oil-lubricated conditions in a 50 N normal contact load. The results indicate that the synergistic effect of dimple surface texture and TiN coating optimizes friction performance and reduces wear, highlighting the novelty of this study. Furthermore, the study identifies the hydrodynamic lubrication effect of the surface morphology formed by the dimple surface texture as a key factor in improving lubrication performance and reducing friction. Additionally, the dimple surface texture enables the mitigation of third body wear due to the wear debris storage function of the micro-dimples. This research provides valuable insights for the design and fabrication of mechanical friction pairs with high wear resistance under oil-lubricated conditions.

Fabrication and tribological behaviors of corner-cube-like dimple arrays produced by laser surface texturing on medical needles

Surface Texturing for Low Friction Mechanical Components

Design and Fabrication of the Lubricating Dimple of the Headface Sliding Bearing with Phyllotactic Pattern

Investigations into insertion force of electrochemically micro-textured hypodermic needles

Effect of Micro-Dimple Geometry on the Tribological Characteristics of Textured Surfaces

Tribological Properties of Ti6Al4V Titanium Textured Surfaces Created by Laser: Effect of Dimple Density

Fabrication and tribological characterization of laser textured engineering ceramics: Si3N4, SiC and ZrO2

Optimization of Tribological Characteristics of a Combined Pattern Textured Surface Using Taguchi Design

Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner–piston ring

The Friction And Wear Behavior Of Laser Textured Surfaces In Non-Conformal Contact Under Starved Lubrication

Investigation of the Effect of Milli-Scale Dimples on Planar Contact Lubrication

Study of micro-dimples fabricated on alumina-based ceramics using micro-abrasive jet machining

A Novel Surface Texture Shape for Directional Friction Control

Effect of Micro-Dimple Texture on the Tribological Performance of Brass with Titanium Nitride (TiN) Coating under Oil-Lubricated Conditions

Fabrication and characterization of DLC coated microdimples on hip prosthesis heads

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Effect of different laser texture configurations on improving surface wettability and wear characteristics of Ti6Al4V implant material

Cutting Force Of Hollow Needle Insertion In Soft Tissue

Influence of Microdimple on Lubrication Performance of Textured Plunger Pump

Friction Reduction Performance of Microstructured Surfaces Generated by Nonresonant Modulation Cutting

Micro-dimple Surface Texture Picosecond Laser Processing and Tribological Properties