Abstract:Currently,there are no suitable lubricants for the cold rolling process of Mg alloy.Occasional,the lubricants used for Al alloy rolling is used or even skip the lubricants.Cold rolling process without lubricants will lead to poor surface quality of pro-ducts and high energy consumption.The application of conventional oil-based lubricant in Al alloy rolling processes relies heavily on sulphur,chlorine and phosphorous-containing additives.These additives cause negative effects on the environment even at low con-centrations during the disposal of waste fluids.Based on this,AZ31 Magnesium alloy sheets were processed by cold rolling lubricated with different SiO2/MoS2 mixing ratios hybrid nanolubricants.The cold rolling performance was investigated by measuring rolling force as well as the surface roughness of the sheets.The morphology and composition of surface were characterized by means of field emission scanning electron microscope (FESEM)and X-ray photoelectron spectrum (XPS),and the synergistic lubrication mecha-nism of SiO2/MoS2 hybrid nanolubricants was discussed.The results indicated that the optimal SiO2/MoS2 mixing ratio in the base oil was 0.25:0.75.The excellent lubrication properties of the SiO2/MoS2 hybrid nanolubricant effectively reduced the rolling force and improved the surface quality of sheets during cold rolling process,compared with those of pure nanolubricants and neat oil without nanoparticles tested in the same conditions.The synergistic effect in the SiO2/MoS2 combinations may be explained in terms of the micro-cooperation of various nanoparticles with different shapes and lubrication mechanisms.

Lubrication Performance of Mos2 and Sio2 Nanoparticles As Lubricant Additives in Magnesium Alloy-Steel Contacts

Synergistic Effect of MoS₂ and SiO₂ Nanoparticles as Lubricant Additives for Magnesium Alloy-Steel Contacts.

An Investigation on the Tribological Performances of the SiO 2 /mos 2 Hybrid Nanofluids for Magnesium Alloy-Steel Contacts

Exploring the Effect of Nanoparticle Size on the Tribological Properties of Sio2 / Polyalkylene Glycol Nanofluid under Different Lubrication Conditions

Effects of Combined Additions of SiO 2 and MoS 2 Nanoparticles As Lubricant Additive on the Tribological Properties of AZ31 Magnesium Alloy

Tribological Properties of Carbon Nanotube/sio2 Combinations As Water-Based Lubricant Additives for Magnesium Alloy

Experimental Evaluation of MoS2 Nanosheets As Lubricant Additive in Different Types of Base Oil for Magnesium Alloy/steel Pairs

Preparation and tribological behaviors of magnesium silicate hydroxide-MoS2 nanoparticles as lubricant additive

Friction and self-repairing behaviour of magnesium silicate hydroxide-MoS2 lubricant additives on gray cast iron with Cr-coated steel ball friction pairs

Effect of Nanoparticles on the Tribo-Layers and the Tribology of a Steel-on-steel Couple

An Investigation on the Lubrication Mechanism of MoS2 Nanoparticles in Unidirectional and Reciprocating Sliding Point Contact: the Flow Pattern Effect Around Contact Area

Tribological Performance of Magnesium Silicate Hydroxide/Ni Composite as an Oil-Based Additive for Steel–Steel Contact

The tribological performance evaluation of steel-steel contact surface lubricated by polyalphaolefins containing surfactant-modified hybrid MoS2/h-BN nano-additives

Investigation on the Lubrication Advantages of MoS2 Nanosheets Compared with ZDDP Using Block-on-ring Tests

Tribological properties of magnetron sputtered MoS2/metal (Ti, Mo) nanocomposite coatings

Tribological Behavior of Fe3o4/Mos2 Nanocomposites Additives in Aqueous and Oil Phase Media

Tribological Properties and Lubricant Mechanisms of SiO2/MoS2 Hybrid Nanolubricants in Magnesium Alloys Cold Rolling

CU Nanoparticles Effect on the Tribological Properties of Hydrosilicate Powders As Lubricant Additive for Steel–steel Contacts

Nano-Scaled Metal Powder Improving Tribological Properties of Lubricant

Tribological Performances of SiO2/graphene Combinations As Water-Based Lubricant Additives for Magnesium Alloy Rolling

The Application of Nano-MoS2 Quantum Dots as Liquid Lubricant Additive for Tribological Behavior Improvement