Abstract:Friction is the most important phenomenon that emerges in the movement of two adjacent surfaces. The resulting wear and release of thermal energy causes failures of engines. It leads to a decrease in the performance of the mechanical system and energy loss. Among the effective ways to control these problems, lubrication is particularly important. Nowadays, adding nano-additives such as pure metals, metal oxides, metal sulfides, and carbon allotropes improves the tribological properties of lubricants. In fact, due to their potential for emission reduction and improving fuel economy, they are widely used as lubricant additives. Among nano-additives, molybdenum disulfide (MoS 2 ) is extensively applied as a lubricant additive due to its unique properties. But what is very important is the high dispersibility of the nano-additive in the base oil, which directly affects the tribological properties of oils. Therefore, more favorable results can be expected by overcoming the tendency to accumulate MoS 2 . So, we synthesized carbon-based nanocomposites (NCs) of MoS 2 to spread on a suitable substrate, thus preventing their accumulation and using the synergistic effect of carbon materials in lubrication. MoS 2 was synthesized through two different methods, providing non-identical morphologies for MoS 2 . Using the one-step hydrothermal method, we grew nanoflowers-like MoS 2 (NFLs-MoS 2 ) on a carbon substrate. MoS 2 with nanosheet morphology (NSs-MoS 2 ) was synthesized using the hydrothermal method and then spreads on carbon substrate by calcination. The tribological properties of synthesized NCs are much better than pure MoS 2 and carbon bases.

Effects of Combined Additions of SiO 2 and MoS 2 Nanoparticles As Lubricant Additive on the Tribological Properties of AZ31 Magnesium Alloy

Synergistic Effect of MoS₂ and SiO₂ Nanoparticles as Lubricant Additives for Magnesium Alloy-Steel Contacts.

Exploring the Effect of Nanoparticle Size on the Tribological Properties of Sio2 / Polyalkylene Glycol Nanofluid under Different Lubrication Conditions

Lubrication Performance of Mos2 and Sio2 Nanoparticles As Lubricant Additives in Magnesium Alloy-Steel Contacts

An Investigation on the Tribological Performances of the SiO 2 /mos 2 Hybrid Nanofluids for Magnesium Alloy-Steel Contacts

Experimental Evaluation of MoS2 Nanosheets As Lubricant Additive in Different Types of Base Oil for Magnesium Alloy/steel Pairs

Preparation and tribological behaviors of magnesium silicate hydroxide-MoS2 nanoparticles as lubricant additive

Tribological Properties of Carbon Nanotube/sio2 Combinations As Water-Based Lubricant Additives for Magnesium Alloy

Tribological Properties and Lubricant Mechanisms of SiO2/MoS2 Hybrid Nanolubricants in Magnesium Alloys Cold Rolling

Tribological Properties of SiO2@Cu and SiO2@MoS2 Core-Shell Microspheres As Lubricant Additives

Tribological Properties of SiO 2 @cu and SiO 2 @mos 2 Core–Shell Microspheres As Lubricant Additives

Tribological Performances of SiO2/graphene Combinations As Water-Based Lubricant Additives for Magnesium Alloy Rolling

SYNERGISTIC TRIBOLOGICAL PROPERTIES OF SYNTHETIC MAGNESIUM SILICATE HYDROXIDE COMBINED WITH AMPHIPHILIC MOLECULES

Nano Magnesium Silicate Hydroxide as Synergistic Lubricant Additive With Micro Carbon Sphere for Enhanced Tribological Properties

Controllable fabrication of magnesium silicate hydroxide reinforced MoS2 hybrid nanomaterials as effective lubricant additives in PAO

Enhancing tribological performance by anodizing micro-textured surfaces with nano-MoS 2 coatings prepared on aluminum-silicon alloys

Tribological Properties of Compound Additives of Magnesium Silicate Hydroxide Superfine Powder and MoDTC in Lubricating Oil Additives

Friction and self-repairing behaviour of magnesium silicate hydroxide-MoS2 lubricant additives on gray cast iron with Cr-coated steel ball friction pairs

The Application of Nano-MoS2 Quantum Dots as Liquid Lubricant Additive for Tribological Behavior Improvement

Molybdenum Disulfide-Based Nanocomposites as Super Oil Nano-Additive with Enhanced Tribological and Rheological Properties

The Tribological Properties of Oil-Soluble Nano-Copper and Nano-Silica Particles as Additives of Lubricating Oils