Abstract:This paper presents the shaking table tests for a 1/5-scale 5-story reinforced concrete (RC) frame subjected to mainshock (MS)-aftershock (AS) sequences for investigating the unfavorable effects of ASs on structural performance. The prototype of the test specimen, which was heavily damaged in <i>M<sub>w</sub></i> 7.9 Wenchuan earthquake, was a teaching building designed and built according to the old version of Chinese design codes. The ground motion records of one MS and three ASs were selected from the Wenchuan strong ground motion database to compose the seismic sequence. A series of peak ground acceleration (PGA) intensity levels were considered to scale the seismic sequence entirely for the simulation of sequential excitations. During the tests, typical global and local damage phenomena of the specimen were observed. Structural responses and dynamic properties of the specimen were monitored and calculated. An Aftershock Influence Ratio (AIR) defined as the ratio between the structural response due to an AS and that due to the corresponding MS was proposed to quantify the effects of ASs. Results show that AIR values are increased significantly as the growth of the accumulative damage of the specimen. Amongst the investigated structural response parameters, the absolute acceleration is impacted mostly by ASs with the corresponding AIR value as large as 85.2%, while the relative displacement is impacted least since the corresponding maximum AIR is only 27.9%. Moreover, at a given accumulative damage level of the specimen, the second AS (AS-II) has the largest effect on structural performance compared to others. This experimental investigation highlights the complex AS effects on structural performance since they are closely correlated to the accumulative damage of the structure mainly caused by MS, structural response parameters, and AS characteristics. It is thus necessary to well consider the AS effects in seismic performance evaluation and seismic design of the structures especially located in the sites with high seismicity.

Shaking Table Model Test And Fe Analysis Of A Reinforced Concrete Mega- Frame Structure With Tuned Mass Dampers

Shaking table test and numerical simulation of the vibration control performance of a tuned mass damper on a transmission tower

Shaking Table Model Test of Jinan Olympic Stadium

Shaking Table Test and Numerical Analysis of a Coal-Fired Power Plant Equipped with Large Mass Ratio Multiple Tuned Mass Damper (LMTMD)

Shaking Table Tests of a Reinforced Concrete Frame Subjected to Mainshock-Aftershock Sequences

Shaking table test and evaluation of a novel high-rise large span concrete cassette structure

Seismic Damage Detection of A Full-Scale Shaking Table Test Structure

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Design method of small scaled shaking table test structural model lacking artificial mass

Shaking table test study of a RC frame with viscous damper

Nonlinear Modeling of the Ten-Story RC Building Structure of 2015 E-Defense Shaking Table Tests

Shaking table test and seismic behaviour evaluation of viscous damping wall with amplification mechanism

Shaking table test for a mid-highrise big-bay RC frame model with special-shaped columns

Shaking table model test analysis of gymnasium building with large span

Shaking table test and numerical analysis of an asymmetrical twin‐tower super high‐rise building connected with long‐span steel truss

Shaking Table Attached to Magnetorheological Damper: Simulation and Experiments for Structural Engineering

Simulation of shake‐table test for a two‐story low‐damage concrete wall building

Shaking Table Test and Dynamic Response Prediction on an Earthquake-Damaged RC Building

Shaking Table Test on Structural Model of a Large Ship Lift Tower

Shaking table test of a complex transfinite structures with plane irregularity

Shaking table experimental study and theoretical analysis of the longitudinal seismic-reduced behavior of continuous-beam bridges