Abstract:Microdevices prepared in a silicon substrate have been widely used in versatile fields due to the matured silicon-based microfabrication technique and the excellent physical properties of silicon material. However, the high thermal conductivity of silicon restricts its application in most thermal microdevices, especially devices comprising different temperature zones. In this work, a parylene-filled-trench technique was optimized to realize high-quality thermal isolation in silicon-based microdevices. Parylene C, a heat transfer barricading material, was deposited on parallel high-aspect-ratio trenches, which surrounded the isolated target zones. After removing the remnant silicon beneath the trenches by deep reactive ion etching from the back side, a high-quality heat transfer barrier was obtained. By using narrow trenches, only 5 mu m thick parylene was required for a complete filling, which facilitated multi-layer interconnection thereafter. The parylene filling performance inside the high-aspect-ratio trench was optimized by two approaches: multiple etch-deposition cycling and trench profile controlling. A 4 x 6 array, in which each unit was kept at a constant temperature and was well thermally isolated individually, was achieved on a silicon substrate by using the present parylene-filled-trench technique. The preliminary experimental results indicated that the present parylene-filled-trench structure exhibited excellent thermal isolation performance, with a very low power requirement of 0.134 mW (K mm(2))(-1) for heating the isolated silicon unit and a high thermal isolation efficiency of 72.5% between two adjacent units. Accompanied with high-quality isolation performance, the microdevices embedded the present parylene-filled-trench structure to retain a strong mechanical connection larger than 400 kPa between two isolated zones, which is very important for a high-reliability-required micro-electro-mechanical-system (MEMS) device. Considering its room-temperature processing essence, the present parylene-filled-trench technique is believed to be a promising isolation method in the post-complementary metal oxide semiconductor MEMS integration.

Fabrication of robust electrothermal MEMS devices using aluminum?tungsten bimorphs and polyimide thermal isolation

A process for fabricating robust electrothermal micromirrors with customizable thermal response time and power consumption

Ion Write Microthermotics: Programing Thermal Metamaterials at the Microscale

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

A 2-AXIS SI/AL Bimorph-Based Electrothermal Micromirror Integrated with Piezoresistors for High Resolution Position Sensing

Fabrication of MEMS components using ultrafine-grained aluminium alloys

Optimization and Fabrication of MEMS suspended structures for nanoscale thermoelectric devices

Stability Study of an Electrothermally-Actuated MEMS Mirror with Al/SiO2 Bimorphs

Development of Thermoelectric Microdevices by Combining Materials Processing and Silicon Micromachining Technology

Fabrication of monolithic integrated bimaterial resonant uncooled IR sensor

A Parylene-Filled-Trench Technique for Thermal Isolation in Silicon-Based Microdevices

Electro-thermal actuator using non-silicon micro fabrication technology

A Robust Lateral Shift Free (LSF) Electrothermal Micromirror with Flexible Multimorph Beams

Microfabrication of thermoelectric materials by silicon molding process

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

A Multi-Degree-of-freedom Micromirror Utilizing Inverted-Series-connected Bimorph Actuators

An Approach for Achieving Uniform Temperature Distribution on the Bimorphs of Electrothermal Micromirrors

An Electrothermal Cu/W Bimorph Tip-Tilt-Piston MEMS Mirror with High Reliability.

Thermomechanical Reliability Enhancement Of High-Power Mems With Movable Structure Based On Implanted Skin Hairs

Big MEMS for Thermal Measurement

A Robust, Fast Electrothermal Micromirror With Symmetric Bimorph Actuators Made Of Copper/Tungsten