Abstract:In this article, an ultracompact fiber Michelson interferometer (MI) based on parallel polymer cavities with Vernier effect is proposed. A series of high-frequency fringes in the reflection spectrum with different amplitudes form the envelope. Theoretical temperature sensitivities of the envelope and the high-frequency fringes are 2.750 and −0.136 nm/°C, respectively. The theoretical differential sensitivity of the MI obtained by subtracting the high-frequency fringes sensitivity from the envelope sensitivity reaches 2.886 nm/°C. Two-photon polymerization (TPP) technique is used to fabricate the parallel polymer cavities: a liquid polymer cavity and a solid polymer cavity on the end face of a single-mode fiber (SMF). The size of the proposed sensor can be controlled precisely, and the total length along the fiber axis is only $44 ~\mu \text{m}$ . The interface of liquid and solid polymer cavities just locates on the center of SMF. Since the optical paths between liquid polymer cavity and solid polymer cavity are slightly different, the Vernier effect is generated. Experimental results show that the temperature sensitivities of the envelope and the high-frequency fringes are 2.782 and −0.097 nm/°C, respectively. The final differential sensitivity of the structure reaches 2.879 nm/°C. Theoretical and experimental results agree well. The proposed sensor is with a high-temperature sensitivity and an ultracompact volume. It can have important application prospects in fields, such as microfluid chip and biomedicine.

Fabrication and Characterization of a Polymer/Metal Bimorph Microcantilever for Ultrasensitive Thermal Sensing

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Fabrication and Characterization of Sio2 Microcantilever for High Sensitive Moisture Sensor

Fabrication and characterization of SiO2 microcantilever for microsensor application

Research on temperature-sensitive properties of polymer bi-layer microcantilever

Dynamic Thermomechanical Response of Bimaterial Microcantilevers to Periodic Heating by Infrared Radiation

A Novel Vanadium Dioxide-Based Dual-Heater Microfluidic Thermal Flow Sensor with Record High Sensitivity

Thermal Ultrasensitive Sensor Based on a Polymer-coated Silica Fiber Taper Interferometer

Polymer-assisted Sensitivity-enhanced Temperature sensor for Contact-type Sensing

Dynamic Photothermal-Mechanical Response of A Microcantilever Modified by Carbon Nanotube Film

Development of 100-nm-thick self-sensing nanocantilevers and characterization of the temperature dependence of the piezoresistivity and conductivity

Ultracompact and Sensitive Fiber Michelson Temperature Sensor-Based Parallel Polymer Cavities with Vernier Effect

Resonant Drift of Microcantilever Caused by Temperature Variation

Fabrication and performance of bidirectional cantilever sensor with conductive Thermoplastic Polyurethane porous foams

Ultra-sensitive Polymeric Waveguide Temperature Sensor Based on Asymmetric Mach-Zehnder Interferometer

Achieving Ultrasensitivity and Long-Term Durability Simultaneously for Microcantilevers Inspired by a Scorpion?s Circular Tip Slits

On Chip, High-Sensitivity Thermal Sensor Based On High-Q Polydimethylsiloxane-Coated Microresonator

Flexible Implantable Microtemperature Sensor Fabricated on Polymer Capillary by Programmable UV Lithography with Multilayer Alignment for Biomedical Applications

Fabrication of a Low Cost Flexible Micro-Device for Measuring Fiber Thermal Conductivity

Ultra-Sensitive Temperature Sensor of Cascaded Dual PDMS-Cavity Based on Enhanced Vernier Effect

Temperature Sensitivity of Polymer Fiber Microlasers