Abstract:Air-filled open-cell polymeric foams are widely used for absorbing impact energy under various strain rates. Modeling their compression behavior under large deformation across a wide strain rate range remains a challenge, as the air pressure is dominated by viscous effect or inertial effect at different strain rates. In this study, the compression response of air-filled open-cell polyurethane (PU) foam is characterized across a wide strain rate range from 0.0001 s−1 to 5000 s−1. The plateau stress and energy absorption properties of the foam exhibit a power-law dependency on strain rate, showing lower rate sensitivity at quasi-static rates and increased sensitivity at high strain rates. To describe the observed rate sensitivity variation, the effect of airflow resistance is quantitatively modeled and a visco-hyperelastic constitutive model considering air pressure is developed. It shows that at high strain rates, the air pressure can constitute up to 30 % of the energy absorption contribution while it is relatively negligible at quasi-static strain rates, which significantly amplifies the difference in rate sensitivity between quasi-static and high strain rates. Furthermore, a simplified semi-empirical formula is proposed to rapidly estimate the air pressure in open-cell foams at high strain rates. This formula demonstrates the mechanical response transition from open-cell to closed-cell foams with increasing strain rates. This study is meaningful for understanding the dynamic response and the energy absorption capabilities of air or fluid filled open-cell foam.

Strain Rate Behavior of Closed-Cell Al-Si-Ti Foams: Experiment and Numerical Modeling

Experimental and Numerical Study on Strain Rate Effects of Close-Celled Aluminum Foams

Strain rate effects on the compressive property and the energy-absorbing capacity of aluminum alloy foams

Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading

The Strain Rate and Density Dependence of the Mechanical Properties of Closed-Cell Aluminum Foam

Numerical investigation of influences of porous density and strain-rate effect on dynamical responses of aluminum foam

Rate-Dependent Constitutive Model Coupled with Temperature Softening for Open-Cell Aluminum Foam

High Strain Rate Compression of Cenosphere-Pure Aluminum Syntactic Foams

Deformation Characteristic of Metal Foam under Different Strain Rate and Temperature

Quasi-static and High Strain Rates Compressive Behavior of Aluminum Matrix Syntactic Foams

Dynamic mechanical properties of aluminum alloy foams

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Influence of Strain Rate on the Mechanical Properties and Energy Absorption Capacity of Aluminum Alloy Foam

An Analytical Stress-Strain Model for Open-Cell Metal Foam

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

Strain-rate effect and micro-structural optimization of cellular metals

High temperature and mesostructure effect on aluminum foam compression responses

Study on the Compression Properties and Deformation Failure Mechanism of Open‐Cell Copper Foam

Strain rate effect on the properties foam materials

Micro-Inertia Effect and Dynamic Poisson'S Ratio of Closed-Cell Metallic Foams under Compression

Characterizing and Modeling the Wide Strain Rate Range Behavior of Air-Filled Open-Cell Polymeric Foam