Abstract:The rotating units type negative Poisson's ratio structures are firstly prepared by continuous fiber 3D printing technology. The influences of the printing path on the Poisson's ratio, elastic modulus and energy absorption of the structures under compression are systematically researched. The printed CFNPRSs with a lower relative density of 0.18 has an even better negative Poisson's ratio effect than the existing 3D printed fiber‐reinforced auxetic structures. In this work, continuous fiber reinforced thermoplastic negative Poisson's ratio structures (CFNPRSs) with rotating squares are fabricated by 3D printing based on a symmetrical orthogonal and one‐stoke path planning method. The influences of the printing path on the Poisson's ratio, elastic modulus and energy absorption of the structures under compression are systematically researched. The distribution of continuous fiber at the hinge has a great influence on the compression behavior of the structures. As the number of cross laps of continuous fibers at the hinge increases, the negative Poisson's ratio effect decreases while the elastic modulus and energy absorption increase. The printed CFNPRSs with no cross lap have the most obvious negative Poisson's ratio effect, with an average Poisson's ratio of −0.61. A comparative study on Poisson's ratio of the 3D printed polylactic acid negative Poisson's ratio structures (PANPRSs) is carried out, and the results show that the PANPRSs cannot achieve the negative Poisson's ratio effect because the insufficient stiffness of the printed rotation units violates the rigid assumption in theoretical model. Furthermore, the printed CFNPRSs with a lower relative density of 0.18 has an even better negative Poisson's ratio effect than the existing fiber‐reinforced auxetic structures fabricated by 3D printing. This work can provide a significant reference for the preparation of lightweight functional structures using 3D printing. Highlights The CFNPRSs with rotating squares are prepared by 3D printing technique. The path planning of the fiber at the hinge affects the properties of CFNPRSs. The negative Poisson's ratio of CFNPRSs is more obvious than that of PANPRSs. The relative density and Poisson's ratio of CFNPRSs have obvious advantages.

Strain Rate Effect on Mechanical Properties of the 3D-Printed Metamaterial Foams With Tunable Negative Poisson’s Ratio

Impact Properties of Uniaxially Thermoformed Auxetic Foams

Mechanical Metamaterials Foams with Tunable Negative Poisson's Ratio for Enhanced Energy Absorption and Damage Resistance

Mechanical Metamaterials Foams with Tunable Negative Poisson’s Ratio for Enhanced Energy Absorption and Damage Resistance

A 3D Re-Entrant Structural Metamaterial with Negative Poisson’s Ratio Reinforced by Adding Arrow Structures

Enhanced stiffness characteristic and anisotropic quasi-static compression properties of a negative Poisson’s ratio mechanical metamaterial

Study on mechanical properties of an isotropic negative Poisson's ratio Voronoi foam and its foam-filled tube

Effect of printing path on compressive properties of 3D printed continuous fiber composite negative Poisson's ratio structure

Hyperbolic‐Like Structure with Negative Poisson's Ratio: Deformation Mechanism and Structural Design

The 3D-Printed Honeycomb Metamaterials Tubes with Tunable Negative Poisson's Ratio for High-Performance Static and Dynamic Mechanical Properties

The 3D-Printed Honeycomb Metamaterials Tubes with Tunable Negative Poisson’s Ratio for High-Performance Static and Dynamic Mechanical Properties

Experimental and numerical investigation of zero Poisson’s ratio structures achieved by topological design and 3D printing of SCF/PA

Strain Rate Behavior of Closed-Cell Al-Si-Ti Foams: Experiment and Numerical Modeling

Crushing Behavior and Energy Absorption Performance of a Novel 3D Folded Structure with Negative Poisson's Ratio

Fractal Design of 3D-Printing Mechanical Metamaterial Undergoing Tailorable Zero Poisson's Ratio

Compressive Properties and Energy Absorption of 4D Printed Auxetic Mechanical Metamaterials

Compression behavior of 4D printed metamaterials with various Poisson's ratios

Fabrication and characterization of auxetic shape memory composite foams

Continuous fiber reinforced meta-composites with tailorable Poisson's ratio and effective elastic modulus: Design and experiment

Analysis of mechanical behavior in negative Poisson's ratio structures

Strain rate effects on the compressive property and the energy-absorbing capacity of aluminum alloy foams