Abstract:The rotating units type negative Poisson's ratio structures are firstly prepared by continuous fiber 3D printing technology. The influences of the printing path on the Poisson's ratio, elastic modulus and energy absorption of the structures under compression are systematically researched. The printed CFNPRSs with a lower relative density of 0.18 has an even better negative Poisson's ratio effect than the existing 3D printed fiber‐reinforced auxetic structures. In this work, continuous fiber reinforced thermoplastic negative Poisson's ratio structures (CFNPRSs) with rotating squares are fabricated by 3D printing based on a symmetrical orthogonal and one‐stoke path planning method. The influences of the printing path on the Poisson's ratio, elastic modulus and energy absorption of the structures under compression are systematically researched. The distribution of continuous fiber at the hinge has a great influence on the compression behavior of the structures. As the number of cross laps of continuous fibers at the hinge increases, the negative Poisson's ratio effect decreases while the elastic modulus and energy absorption increase. The printed CFNPRSs with no cross lap have the most obvious negative Poisson's ratio effect, with an average Poisson's ratio of −0.61. A comparative study on Poisson's ratio of the 3D printed polylactic acid negative Poisson's ratio structures (PANPRSs) is carried out, and the results show that the PANPRSs cannot achieve the negative Poisson's ratio effect because the insufficient stiffness of the printed rotation units violates the rigid assumption in theoretical model. Furthermore, the printed CFNPRSs with a lower relative density of 0.18 has an even better negative Poisson's ratio effect than the existing fiber‐reinforced auxetic structures fabricated by 3D printing. This work can provide a significant reference for the preparation of lightweight functional structures using 3D printing. Highlights The CFNPRSs with rotating squares are prepared by 3D printing technique. The path planning of the fiber at the hinge affects the properties of CFNPRSs. The negative Poisson's ratio of CFNPRSs is more obvious than that of PANPRSs. The relative density and Poisson's ratio of CFNPRSs have obvious advantages.

Crushing Behavior and Energy Absorption Performance of a Novel 3D Folded Structure with Negative Poisson's Ratio

Energy Absorption by 3D-Printed Mesh Structures with a Negative Poisson's Ratio

A novel 3D impact energy absorption structure with negative Poisson’s ratio and its application in aircraft crashworthiness

A Novel Auxetic 3D Lattice Structure for Enhancing Energy Absorption

A 3D Re-Entrant Structural Metamaterial with Negative Poisson’s Ratio Reinforced by Adding Arrow Structures

Mechanical Properties of Star-Shaped Gradient Lattice Structures Under Tensile Load

A novel 3D polygonal double-negative mechanical metamaterial with negative stiffness and negative Poisson's ratio

Controllable Three-Dimension Auxetic Structure Design Strategies Based on Triply Periodic Minimal Surfaces and Dual Period Deformation Function

Mechanical properties of corrugated structure with negative Poisson's ratio and its application on energy absorbing box based on parametric modeling method

Facile and Universal Method to Obtain Negative Poisson's Ratio via Support‐Free 3D Printing Tetrahedron‐Framework

Meta-structure with stable isotropic negative Poisson's ratio based on the cube-framework stacked by Kirigami units

Study on mechanical properties of an isotropic negative Poisson's ratio Voronoi foam and its foam-filled tube

In-plane compression behavior of meta-tetrachiral and common auxetic structures

Study on impact energy absorption performance and optimization of negative Poisson's ratio structure

Strain Rate Effect on Mechanical Properties of the 3D-Printed Metamaterial Foams With Tunable Negative Poisson’s Ratio

Effect of printing path on compressive properties of 3D printed continuous fiber composite negative Poisson's ratio structure

Energy absorption structure with negative stepped plateau force characteristics under quasi-static loads

Multi-objective optimization and theoretical analysis of re-entrant structure with enhanced mechanical properties

Investigation of Structural Energy Absorption Performance in 3D-Printed Polymer (Tough 1500 Resin) Materials with Novel Multilayer Thin-Walled Sandwich Structures Inspired by Peano Space-Filling Curves

Lattice structures with a negative Poisson's ratio: Energy absorption assessment

Design, microstructure, and mechanical property of negative Poisson's ratio porous structure fabricated by LPBF of AlCoCrFeNi 2.1 eutectic high-entropy-alloy