Abstract:Mechanical metamaterials are man-made rationally-designed structures that present unprecedented mechanical properties not found in nature. One of the most well-known mechanical metamaterials is auxetics, which demonstrates negative Poisson’s ratio (NPR) behavior that is very beneficial in several industrial applications. In this study, a specific type of auxetic metamaterial structure namely idealized 3D re-entrant structure is studied analytically, numerically, and experimentally. The noted structure is constructed of three types of struts—one loaded purely axially and two loaded simultaneously flexurally and axially, which are inclined and are spatially defined by angles θ and φ. Analytical relationships for elastic modulus, yield stress, and Poisson’s ratio of the 3D re-entrant unit cell are derived based on two well-known beam theories namely Euler–Bernoulli and Timoshenko. Moreover, two finite element approaches one based on beam elements and one based on volumetric elements are implemented. Furthermore, several specimens are additively manufactured (3D printed) and tested under compression. The analytical results had good agreement with the experimental results on the one hand and the volumetric finite element model results on the other hand. Moreover, the effect of various geometrical parameters on the mechanical properties of the structure was studied, and the results demonstrated that angle θ (related to tension-dominated struts) has the highest influence on the sign of Poisson’s ratio and its extent, while angle φ (related to compression-dominated struts) has the lowest influence on the Poisson’s ratio. Nevertheless, the compression-dominated struts (defined by angle φ) provide strength and stiffness for the structure. The results also demonstrated that the structure could have zero Poisson’s ratio for a specific range of θ and φ angles. Finally, a lightened 3D re-entrant structure is introduced, and its results are compared to those of the idealized 3D re-entrant structure.

Experimental and numerical investigation of zero Poisson’s ratio structures achieved by topological design and 3D printing of SCF/PA

A 3D Re-Entrant Structural Metamaterial with Negative Poisson’s Ratio Reinforced by Adding Arrow Structures

Two-Phase Topology Optimization for Metamaterials with Negative Poisson's Ratio

Topology optimization design of microstructures with zero Poisson's ratio

An Unusual 3D Metamaterial with Zero Poisson's Ratio in Partial Directions

A Modified Three-Dimensional Negative-Poisson-Ratio Metal Metamaterial Lattice Structure

Lattice structures with negative Poisson's ratio: A review

Topology Optimization of Metamaterial Microstructures for Negative Poisson’s Ratio under Large Deformation Using a Gradient-Free Method

An effective design method for mechanical metamaterials with negative Poissons ratios

Strain Rate Effect on Mechanical Properties of the 3D-Printed Metamaterial Foams With Tunable Negative Poisson’s Ratio

A novel 3D polygonal double-negative mechanical metamaterial with negative stiffness and negative Poisson's ratio

Mechanical metamaterial design with the customized low-frequency bandgap and negative Poisson's ratio via topology optimization

Study on impact energy absorption performance and optimization of negative Poisson's ratio structure

A novel negative stiffness metamaterials: Discrete assembly and enhanced design capabilities

Spatial tuning of the positive and negative Poisson's ratio of metamaterials through gradient design

A 3D Re-entrant structural metamaterial with negative poisson's ratio reinforced by adding arrow structures

4D Metamaterials with Zero Poisson's Ratio, Shape Recovery, and Energy Absorption Features

Controllable design of bi-material metamaterials with programmable thermal expansion and Poisson's ratio

Material characterization and computations of a polymeric metamaterial with a pantographic substructure

Analysis of mechanical behavior in negative Poisson's ratio structures

Idealized 3D Auxetic Mechanical Metamaterial: An Analytical, Numerical, and Experimental Study