Abstract:Auxetic metamaterials, i.e., with negative Poisson's ratio are attracting increasing attention. This study develops a novel method to design and investigate continuous fiber-reinforced meta-composites with tailorable negative Poisson's ratio and effective elastic modulus. First, the design scheme based on parametric level set method, is proposed by combining fast marching method, filtering technology and matrix rotation for attaining the two-dimensional isotropic composites. A novel objective function considering both negative Poisson's ratio and effective elastic modulus is introduced and the result demonstrate that it is effective to not only accelerate the numerical convergence but also achieve a larger negative Poisson's ratio when compared with that using the currently-used objective function. By tailoring a weight ratio for balancing the negative Poisson's ratio and effective elastic modulus, a general contradictive trend was captured. Experimentally, the specimens are accordingly fabricated via 3D printing. Then, the axial compression tests are performed with the aid of digital image correlation technology to characterize the deformation behaviors and evaluate the mechanical properties of the designed meta-composites. Experimental results show that, as the weight ratio increases from 0.02 to 1.57, the effective elastic modulus increases from 180.5 MPa to 310.3 MPa (enhanced by 71.9%) while the negative Poisson's ratio decreases from −0.41 to −0.036 (reduced by 91.4%), proving the effectiveness of the design method. The design methods and experimental results can provide effective approaches and important information for designing novel continuous fiber reinforced meta-composites with tailorable mechanical performance.

An effective design method for mechanical metamaterials with negative Poissons ratios

A novel design of mechanical metamaterial incorporating multiple negative indexes

Topology optimization design of microstructures with zero Poisson's ratio

Mechanical metamaterial design with the customized low-frequency bandgap and negative Poisson's ratio via topology optimization

Multifunctional mechanical metamaterials with tunable double-negative isotropic properties

Two-Phase Topology Optimization for Metamaterials with Negative Poisson's Ratio

A 3D Re-Entrant Structural Metamaterial with Negative Poisson’s Ratio Reinforced by Adding Arrow Structures

Spatial tuning of the positive and negative Poisson's ratio of metamaterials through gradient design

Topology Optimization for Metamaterials with Negative Thermal Expansion Coefficients Using Energy-Based Homogenization

Continuous fiber reinforced meta-composites with tailorable Poisson's ratio and effective elastic modulus: Design and experiment

Study on impact energy absorption performance and optimization of negative Poisson's ratio structure

A Modified Three-Dimensional Negative-Poisson-Ratio Metal Metamaterial Lattice Structure

A level-set procedure for the design of electromagnetic metamaterials

Mechanical Metamaterials Foams with Tunable Negative Poisson's Ratio for Enhanced Energy Absorption and Damage Resistance

Mechanical Metamaterials Foams with Tunable Negative Poisson’s Ratio for Enhanced Energy Absorption and Damage Resistance

A novel 3D polygonal double-negative mechanical metamaterial with negative stiffness and negative Poisson's ratio

Mechanical properties characterization and zero Poisson’s ratio design for perforated auxetic metamaterial by computational homogenized method

A series of auxetic metamaterials with negative thermal expansion based on L -shaped microstructures

Controllable design of bi-material metamaterials with programmable thermal expansion and Poisson's ratio

On the design of three-dimensional mechanical metamaterials using load flow visualization

Lattice structures with negative Poisson's ratio: A review

An effective design method for mechanical metamaterials with negative Poissons ratios