Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Geometry control simulation for long-span steel cable-stayed bridges based on geometrically nonlinear analysis

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Cantilever-casting Control of Prestressed Concrete Cable-Stayed Bridge

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

Simulation of the In Situ Spatially Varying Ground Motions and Nonlinear Seismic Response Analysis of the Cable-Stayed Bridge

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Forward iterative algorithm for fabrication geometry of steel girders in cable-stayed bridges

Effect of Geometric Nonlinearity on Deformation of Extra-Long-Span Cable-Stayed Bridge

Simulating analysis of cantilever casting of prestressed concrete bridge

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Numerical Methods for Geometric Nonlinear Dynamic Analysis of Suspension Bridges Under Earthquake

Dynamic Analysis of Long Span Cable-Stayed Bridge Based on Parallel Computing

Cable prestress and alignment double control during construction of large-span cable-stayed bridges

Analysis of Geometric Nonlinear Behavior of Self-Anchored Suspension Bridge of Large Span

Galloping analysis of the main cable in construction: An advanced nonlinear scheme