Abstract:Firstly,the 3D finite element model of a large-span transmission tow er lines system w ith main tow er height of 375m and main span of 2 756m is established using softw are SAP2000,and is transformed to ABAQUS finite element model by the developed interface program SAP2ABAQUS. Then,the approach for achieving the loading process of static effect under the gravity action is given explicitly by using long-period explicit dynamic loading method. By the approach,the shape finding of cable and its initial stiffness are finished under the gravity action,w hich further realized that gravity analysis could be performed subsequently w ith dynamic loading excited by the subsequent earthquake. Besides,the dynamic characters of four types of model w ith different boundary conditions are analyzed and compared,and from the comparison of model component before and after the transformation and their corresponding modal analysis results, the transformation accuracy through program SAP2ABAQUS is verified. Further,the program MEMS_ b V2012. 5 is updated to MEMS_ b V2013. 5 and the multi-point earthquake motions of target field are simulated. At last,considering geometric large deformation and differential input,the developed subroutine given by ABAQUS main program is used to analyze the elastoplastic and collapse of tow er-lines system. The actual engineering analysis results show that:( 1) The developed interface program SAP2ABAQUS is further verified to have reliable accuracy and high efficiency transformation from the aspect of actual engineering.( 2) The developed subroutine is feasible and reliable for analyzing actual engineering.( 3) The static gravity loading process realized by the long-period dynamic loading method w hich is reasonable in theory and feasible in real,and overcome the difficulty that implicit static gravity mode loading cannot be performed subsequently w ith explicit dynamic analysis.( 4) From modal and theory analysis,it show s that the necessity and reliability of selecting the system of four tow ers w ith three lines as analysis object.( 5) The consistency of multi-point earthquake motion and differential input have the significant influence on occurrence and developing distribution of plastic hinges. So,it is very necessary to consider the multipoint earthquake motions as input w hile analyzing the elasto-plastic responses of the similar structural system.

Numerical Methods for Geometric Nonlinear Dynamic Analysis of Suspension Bridges Under Earthquake

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

An analytical method and its application for large-section PC box girder bridges

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Numerical simulation analysis of dynamical performance of equipment protecting from ship-bridge collision

Dynamic Characteristics and Multi-support Seismic Response Analysis of a Super-large-span Suspension Bridge

A nonlinear mechanical scheme to analyze suspension bridges under large deformation scenarios

VIBRATION CHARACTERISTICS ANALYSIS OF CABLE-STAYED BRIDGES BY THE SUPER-ELEMENT METHOD

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Elasto-plasticity and Collapse Analysis for Large-span and High Structure(III)——Elasto-plastic and Collapse Analysis of Transmission-lines System under Multi-point Seismic Motions

An Analytical Element Method on the Calculation of Suspension Bridges

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Simulation of the In Situ Spatially Varying Ground Motions and Nonlinear Seismic Response Analysis of the Cable-Stayed Bridge

Seismic response analysis of long-span and asymmetrical suspension bridges subjected to near-fault ground motion

Nonlinear static solution of suspension bridge formulated from a surrogate model with secant stiffness of suspension cables

A nonlinear numerical scheme to investigate the influence of geometric nonlinearity on post-flutter responses of bridges

Dynamic Response Analysis of Cable-stayed Bridges Subjected to Moving Load

Deformation and internal force of multitower suspension bridges: Numerical modeling and analytical analysis

Mathematical Analysis and Numerical Computation of String Vibration Equations with Elastic Supports for Bridge Cable Force Evaluation

Numerical failure analysis of a continuous reinforced concrete bridge under strong earthquakes using multi-scale models