Abstract:A fast liquid mixing process was implemented by the cross-flow impingement of thin liquid sheets in the confined mixing channels with the width of millimeter(s). The species transport between the two liquids was studied by visualizing the 2-D concentration field of Rhodamine dye with the planar laser induced fluorescence (PLIF) technique, on which the intensity of segregation (IOS) and the 95% mixing time (τ95) were calculated to evaluate the mixing quality. Due to the reduced spatial scale of liquid mixing and the high energy dissipation rate of ∼1000 to ∼10000W/kg produced by the strong impingement between the liquid sheets, fast mixing of liquids was achieved at a time scale of milliseconds. The effects of operating conditions and the mixer geometry on the mixing behavior were investigated comprehensively by both experiments and computational fluid dynamics (CFD) simulations. Good agreement of the CFD predictions with the experimental data was obtained by the k–ɛ model with species transport, where dependence of the CFD predictions on the turbulent Schmidt number (i.e. Sct) was discussed in detail. The results show that for this turbulence-induced mixing procedure the momentum ratio and the cross-flow angle between the two liquids play significant roles in the mixing efficiency. The absolute liquid velocity has little effect on the species transport in space, i.e. the mixing distance to reach IOS of 5%. Nevertheless, the mixing time is shortened at higher velocity conditions. The fluctuation of the transient concentration signals shows stronger interaction at the interface between the two liquid sheets. And the local concentration fluctuations can be well described by the β-PDF (probability density function) model.

Experimental study on the dispersed phase macro-mixing in an immiscible liquid–liquid stirred reactor

Study on Local Gas-Liquid Dispersion in Dual-Impeller Aerated Stirred Vessel

Intensification of liquid mixing and local turbulence using a fractal injector with staggered conformation

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Millisecond Mixing of Two Liquid Streams in a Mixer Model

Visualization of Micro-Scale Mixing in Miscible Liquids Using Μ-Lif Technique and Drug Nano-Particle Preparation in T-shaped Micro-Channels

Fast liquid mixing by cross-flow impingement in millimeter channels

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Research Progress of Macromixing in Multiphase Stirred Vessels

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Experimental Study on Micromixing in A Single-Feed Semibatch Precipitation Process in A Gas-Liquid-Liquid Stirred Reactor

Gas-liquid-liquid Three-Phase Micro-Scaled Dispersion Process in a Double T-junction Microchannel Device

A Study on Liquid‐liquid Dispersions in a Continuous Mixer Via Computational Fluid Dynamics (CFD) Simulation Combined with Population Balance Model (PBM)

Study of Fast Liquid-Liquid Micromixing Using PLIF Technique

Mixing in a co-flow-focusing structured droplet-based micromixer

Study on the reactive mixing process in an unbaffled stirred tank using planar laser-induced fluorescence (PLIF) technique

Mixing Performance and Drug Nano-Particle Preparation Inside Slugs in a Gas–liquid Microchannel Reactor

Large-scale dispersed phase-resolved direct numerical simulation (LDPR-DNS) of mechanically stirred reactors: Understanding the dispersion mechanism of multiphase flow and qualifying the droplets produced

Micromixing Simulation of Novel Large-Double-Blade Impeller

An Experimental Study of Immiscible Liquid–liquid Dispersions in a Pump–mixer of Mixer–settler