Abstract:Three experimental approaches are presented to determine the mixing characteristics of a new kind of high-efficiency membrane dispersion minireactor in which microfiltration membranes are applied as the dispersion media. Residence time distribution (RTD) curves were measured for determining the macromixing characteristics. A typical Dushman reaction (iodide-iodate) coupled with a neutralization and precipitation reaction of BaSO4 were introduced to characterize the micromixing performance of a single-phase mixing process. A dye extraction method was also applied to study the micromixing performance of a two-liquid phase-mixing system. The RTD result showed that the flow performance in the minireactor was almost in the plug flow condition. The micromixing performance was expressed with a segregation index, which could be < 0.002. The single-phase micromixing performance reached the desired level. The result of precipitation of BaSO4 showed that the mixing performance had a substantial influence on the particle size and size distribution. It was found that in the single-phase mixing process the mixing performance was mainly influenced by the phase flux and the membrane pore size. With decreasing dispersed fluid flux or the membrane pore size, or with increasing continuous fluid flux, the micromixing performance was enhanced. The dye extraction method can correctly determine the mixing performance of a two-liquid phase-mixing system. Unlike the single-phase mixing process, in the two-liquid phase-mixing process there was a minimum value for the mixing efficiency with the change of the continuous or dispersed-phase flux, when the membrane pore size was > 0.9 mu m. (c) 2005 American Institute of Chemical Engineers.

Research Progress of Macromixing in Multiphase Stirred Vessels

Research Progress of Liquid-Phase Mixing Time in Stirred Tanks

Research Progress on Macro-and Micro-Mixing and Intensification in Stirred Tank Reactors

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Development and Research Progress in Mixers with Broad Adaptability to Viscosity

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Numerical Study on the Synergistic Mechanism of Coaxial Mixers in Dense Solid-Liquid Mixing Systems

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Research progress of gas dispersion in stirred vessel with medium or high viscosity fluids

Progress of the Experimental Researches and Numerical Simulations of the Flow Fields in Stirred Tanks

Experimental study on the dispersed phase macro-mixing in an immiscible liquid–liquid stirred reactor

Retrospect and Perspective of Micro-mixing Studies in Stirred Tanks

Numerical simulation and experimental investigation of multiphase mass transfer process for industrial applications in China

Progress in Viscous Medium Micromixing Process Study

Investigation of the mechanism of low‐density particle and liquid mixing process in a stirred vessel

Experimental determination and numerical simulation of mixing time in a gas–liquid stirred tank

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Experimental and Numerical Studies of the Flow Field in a Stirred Tank Equipped with Multiple Side‐Entering Agitators

Experimental Approaches for Understanding Mixing Performance of A Minireactor