Abstract:In order to promote the application of new biomedical materials Mg-Zn-Ca-Zr alloy, the Mg-3Zn-xCa-0.6Zr (x = 0.6, 1.2, 1.8wt.%) alloys were fabricated by an extrusion shearing (ES) process. The effect of secondary phase precipitation, grain size and texture on the corrosion resistance of Mg-3Zn-xCa-0.6Zr (wt.%) in Hank's solution were studied using electrochemical, immersion and electron back-scattering diffraction (EBSD) tests, and the corrosion mechanism of ES alloys was discussed. With increasing the addition of Ca element, the grain size of alloys first decreased and then increased, and the constitution of second phase was transformed from MgZn and Ca2Mg6Zn3 phases to Mg2Ca and Ca2Mg6Zn3 phases, the texture changed from a bimodal texture intensity with stronger basal texture to a DRX texture intensity with a weaker texture. Mg-3Zn-0.6Ca-0.6Zr alloy showed the lowest corrosion rate of ~0.3140 ± 0.0642mm/y. The excellent corrosion resistance of Mg-3Zn-0.6Ca-0.6Zr alloy could be attributed to the High-potential dispersion distribution of MgZn and Ca2Mg6Zn3 phases and the strong basal texture. As well as more dense corrosion product films formed after alloying, effectively hindering local corrosion. In contrast, corrosion product films formed by the fine grain structure of Mg-3Zn-1.2Ca-0.6Zr alloy were not sufficient to resist the galvanic coupling corrosion between the Mg2Ca phase and the Ca2Mg6Zn3 phase, which caused the decreasing of its corrosion resistance.

Stress Corrosion Cracking of Several Solution Heat-Treated Mg–X Alloys

Effect of Heat Treatment on the Stress Corrosion Cracking Behavior of Cast Mg-3Nd-3Gd-0.2Zn-0.5Zr Alloy in a 3.5 Wt% NaCl Salt Spray Environment

Effect of Grain Structure on the Stress Corrosion Cracking (SCC) Behavior of an As-Extruded Mg-Zn-Zr Alloy

Stress Corrosion Cracking Susceptibility of a High Strength Mg-7%Gd-5%Y-1%Nd-0.5%Zr Alloy

Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control

Influence of Phase Dissolution and Hydrogen Absorption on the Stress Corrosion Cracking Behavior of Mg-7%Gd-5%Y-1%Nd-0.5%Zr Alloy in 3.5 Wt.% NaCl Solution

Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment

Effect of Zn Addition on the Stress Corrosion Cracking of As-Cast BCC Mg-11Li Based Alloys

Effect of Solution Treatment on the Fatigue Behavior of an As-Forged Mg-Zn-Y-Zr Alloy

Investigation of Stress Corrosion Cracking Behaviors of an AZ91 Magnesium Alloy in 0.1 Kmol/m 3 Na2SO4 Solution Using Slow Strain Rate Test

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Stress Corrosion Cracking Behavior of 4.19%Zn-1.34%Mg (A7N01S-T5) Aluminum Alloy Welded Joints

Stress Corrosion Cracking Induced by the Combination of External and Internal Hydrogen in Al-Zn-Mg-Cu Alloy

Effect of Hydrogen on Stress Corrosion Cracking of Magnesium Alloy in 0.1M Na2SO4 Solution

Data analysis of the influence of microstructure, composition, and loading conditions on stress corrosion cracking behavior of Mg alloys

Correlations Between Stress Corrosion Cracking Susceptibility and Grain Boundary Microstructures for an Al–Zn–Mg Alloy

Stress Corrosion Cracking Resistant Nanostructured Al-Mg Alloy with Low Angle Grain Boundaries

Correlations among stress corrosion cracking, grain-boundary microchemistry, and Zn content in high Zn-containing Al–Zn–Mg–Cu alloys

The stress corrosion cracking behaviour of biomedical Mg-1Zn alloy in synthetic or natural biological media

Effect of Microstructure Evolution on the Corrosion Behavior of Extrusion-Shearing Mg-3zn-Xca-0.6zr Alloys

Microstructure and Mechanical Properties of As-Cast and Solution-Treated Mg-Zn-Gd-based Alloys Reinforced with Quasicrystals