Burst and oscillation as disparate neuronal properties

Y. Kaneoke,J. Vitek

DOI: https://doi.org/10.1016/0165-0270(96)00081-7

IF: 2.987

1996-10-01

Journal of Neuroscience Methods

Abstract:

What problem does this paper attempt to address?

Linking the effect of localised pitting corrosion with mechanical integrity of a rare earth magnesium alloy for implant use

Kerstin van Gaalen,Conall Quinn,Felix Benn,Peter E McHugh,Alexander Kopp,Ted J Vaughan

DOI: https://doi.org/10.1016/j.bioactmat.2022.08.004

2022-08-12

Abstract:This study presents a computational framework that investigates the effect of localised surface-based corrosion on the mechanical performance of a magnesium-based alloy. A finite element-based phenomenological corrosion model was used to generate a wide range of corrosion profiles, with subsequent uniaxial tensile test simulations to predict the mechanical response to failure. The python-based detection framework PitScan provides detailed quantification of the spatial phenomenological features of corrosion, including a full geometric tracking of corroding surface. Through this approach, this study is the first to quantitatively demonstrate that a surface-based non-uniform corrosion model can capture both the geometrical and mechanical features of a magnesium alloy undergoing corrosion by comparing to experimental data. Using this verified corrosion modelling approach, a wide range of corrosion scenarios was evaluated and enabled quantitative relationships to be established between the mechanical integrity and key phenomenological corrosion features. In particular, we demonstrated that the minimal cross-sectional area parameter was the strongest predictor of the remaining mechanical strength (R2 = 0.98), with this relationship being independent of the severity or spatial features of localised surface corrosion. Interestingly, our analysis demonstrated that parameters described in ASTM G46-94 showed weaker correlations to the mechanical integrity of corroding specimens, compared to parameters determined by Pitscan. This study establishes new mechanistic insight into the performance of the magnesium-based materials undergoing corrosion.
Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment

Sajjad Jafari,R K Singh Raman,Chris H J Davies,Joelle Hofstetter,Peter J Uggowitzer,Jörg F Löffler

DOI: https://doi.org/10.1016/j.jmbbm.2016.09.033

Abstract:Magnesium (Mg) alloys have attracted great attention as potential materials for biodegradable implants. It is essential that an implant material possesses adequate resistance to cracking/fracture under the simultaneous actions of corrosion and mechanical stresses, i.e., stress corrosion cracking (SCC) and/or corrosion fatigue (CF). This study investigates the deformation behaviour of a newly developed high-strength low-alloy Mg alloy, MgZn1Ca0.3 (ZX10), processed at two different extrusion temperatures of 325 and 400°C (named E325 and E400, respectively), under slow strain tensile and cyclic tension-compression loadings in air and modified simulated body fluid (m-SBF). Extrusion resulted in a bimodal grain size distribution with recrystallised grain sizes of 1.2 μm ± 0.8 μm and 7 ± 5 μm for E325 and E400, respectively. E325 possessed superior tensile and fatigue properties to E400 when tested in air. This is mainly attributed to a grain-boundary strengthening mechanism. However, both E325 and E400 were found to be susceptible to SCC at a strain rate of 3.1×10-7s-1 in m-SBF. Moreover, both E325 and E400 showed similar fatigue strength when tested in m-SBF. This is explained on the basis of crack initiation from localised corrosion following tests in m-SBF.
In vitro evaluation of stress corrosion cracking susceptibility of PEO-coated rare-earth magnesium alloy WE43

Julia Nachtsheim,Songyun Ma,Jaka Burja,Bernd Markert

DOI: https://doi.org/10.1016/j.surfcoat.2024.130391

IF: 4.865

2024-01-15

Surface and Coatings Technology

Abstract:Controlling material degradation in complex mechanobiological environments is the current challenge in advancing biodegradable magnesium implants for orthopaedic applications. Understanding stress corrosion cracking (SCC) mechanisms of magnesium alloy-coating systems in physiological fluids facilitates the design of magnesium implants with excellent biomedical performance. In this study, we investigated the SCC behaviour of a medical grade PEO-coated magnesium alloy WE43 under different loading conditions. Constant loadings tests (CLT) and slow strain rate tests (SSRT) were conducted to evaluate the SCC susceptibility of this alloy-coating system under in vitro conditions. Fracture surfaces of the non-coated and PEO-coated specimens were characterised by scanning electron microscopy to reveal the SCC mechanisms under different loading configurations. The experimental results showed that the alloy-coating system exhibits a high SCC resistance in SSRT conditions. However, high stress levels and plastic deformations lead to a significant acceleration of the SCC process. Moreover, the fracture surface analysis demonstrated that the brittle nature of the PEO coating deteriorates the mechanical integrity of the alloy under critical mechanical loadings, which results in an increased susceptibility towards stress corrosion cracking of the coated WE43.

physics, applied,materials science, coatings & films
Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control

Ying Li,Mingyang Yu,Xiwu Li,Kai Wen,Lizhen Yan,Kai Zhu,Wei Xiao

DOI: https://doi.org/10.3390/ma17235678

IF: 3.4

2024-01-01

Materials

Abstract:The 7085 aluminum alloy with a low Cu content is an important lightweight structural material in the aerospace field due to its advantages of low density, high specific strength, and high hardenability. However, like other high-strength Al-Zn-Mg-Cu alloys, this alloy is susceptible to stress corrosion cracking (SCC). Additionally, the lower Cu content may increase its tendency toward SCC, potentially impacting the safe use of this alloy. Therefore, this study investigated the effects of aging treatment processes on the mechanical properties and SCC resistance of 7085 aluminum alloy. And the factors affecting the properties of the alloy were analyzed by optical microscope (OM), scanning transmission electron microscope (STEM), and energy-dispersive X-ray spectroscopy (EDS) analyses. The results indicated that increasing the secondary aging temperature and adding a tertiary aging step can significantly reduce the alloy’s susceptibility to SCC while meeting the mechanical performance requirements. The reduced SCC sensitivity was mainly attributed to the increased spacing of grain boundary precipitates, a wider precipitate-free zone at the grain boundaries, and a higher Cu content in the grain boundary precipitates.
Inhibiting stress corrosion cracking of a prefabricated surface‐defective magnesium alloy thanks to biological organic components

Lianxi Chen,Xiaorong Li,Haicheng Gu,Xueying Zhang,Ben Niu,Zhiguo Zhang,Xiaojian Wang,Dongchu Chen,Chunwang Zhao

DOI: https://doi.org/10.1111/ffe.14310

IF: 3.373

2024-04-20

Fatigue & Fracture of Engineering Materials & Structures

Abstract:Biomedical magnesium (Mg) alloys remain a challenge for their mainstream application, because the combination of bio‐mechanical stress and corrosive physiological environment leading to stress corrosion cracking (SCC). It is crucial to avoid the sudden brittle fracture of Mg alloys in vivo for predicting their service duration. However, the key factors, such as surface or physiological environment features, determining the origination or propagation of SCC behavior are still unclear. In the present study, a prefabricated surface defects coating was prepared by the phytic acid (PA, C6H18O24P6) conversion treatment. Four mimicking physiological media were used, ranging from simple to equivalent (Dulbecco's Modified Eagle Medium and Protein [DMEM+Pro]). The results showed that the PA film with numerous micro‐cracks provided limited protective ability in synthetic biological media. A striking finding was determined that although initial high corrosion rate of samples in DMEM+Pro led to an increased SCC nucleation, significant ductile fracture with elongation to failure (14.86%) was observed. Combined with the fracture features, the adsorption or deposition of biological composition into the tunnel of SCC cracks significantly inhibited the hydrogen embrittlement (HE) behavior. These results indicate that preventing the propagation of SCC crack by biological composition, rather than nucleation, plays a key role in avoiding the sudden fracture of Mg alloys. It provides a novel perspective to determine the non‐brittle fracture of Mg alloys for biomedical applications.

materials science, multidisciplinary,engineering, mechanical
The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy

Xiaoqing Shang,Haiming Zhang,Leyun Wang,Gaoming Zhu,Zhenshan Cui,M.W. Fu,Xiaoqin Zeng

DOI: https://doi.org/10.1016/j.ijplas.2021.103040

IF: 8.5

2021-09-01

International Journal of Plasticity

Abstract:<p>The ductility of magnesium alloys is greatly affected by damage formation and accumulation. Due to its low-symmetry close-packed hexagonal structure, magnesium alloy's damage behaviors are different from most cubic crystal metals. A comprehensive study was conducted to uncover the underlying damage mechanism of a Mg-0.5%wtCa alloy by using mechanical tests with different stress states, microstructure characterization and the crystal plasticity finite element method (CPFEM) simulation. It is found that the central hole tension has a greater resistance to damage than uniaxial tension, as confirmed by the results of digital image correlation (DIC) measurement and X-ray micro-computed tomography (XCT) characterization. This unusual phenomenon is related to the variation of fracture mechanism in the two scenarios. For the uniaxial tension, plentiful grain boundary cracks are formed and the fractography shows an intergranular feature; while for the central hole tension, the propensity of intergranular fracture is less evident. Through combining the SEM observations of the boundary cracks and the strain distribution determined by the CPFEM simulation, it is revealed that the boundary cracking is caused by the intense deformation heterogeneity and the large strain gradient. Uniaxial tension has a diffuse deformation mode with the randomly distributed ″soft″ grains and ″hard″ grains. This strain partition mode results in a number of spots with high local strain gradient; these spots serve as the nucleation sites of the grain boundary cracks. The results of the notched tests with different notch radii also show the fact that the localized deformation mode is beneficial than the diffuse one. Therefore, in addition to the stress state, the strain partition mode also plays a vital role in the fracture of the dilute Mg-Ca alloy. Further corroboration was done by a three-bending test with gradient deformation mode. A large fracture strain was obtained in the test, indicating that the magnesium alloy has a potentially good formability when the forming process is reasonably designed.</p>

materials science, multidisciplinary,engineering, mechanical,mechanics
Influence of Phase Dissolution and Hydrogen Absorption on the Stress Corrosion Cracking Behavior of Mg-7%Gd-5%Y-1%Nd-0.5%Zr Alloy in 3.5 Wt.% NaCl Solution

S. D. Wang,D. K. Xu,B. J. Wang,L. Y. Sheng,Y. X. Qiao,En-Hou Han,C. Dong

DOI: https://doi.org/10.1016/j.corsci.2018.07.019

IF: 7.72

2018-01-01

Corrosion Science

Abstract:Through investigating the influence of phase dissolution and hydrogen on the stress corrosion cracking (SCC) behavior of an as-cast Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy in 3.5 wt.% NaCl solution, it revealed that the proposed T4 treatment can improve the SCC resistance. Based on the microstructural analysis, such improvement was mainly ascribed to the complete dissolution of coarse eutectic pockets. Further analysis indicated that the SCC mechanism was associated with hydrogen embrittlement (HE). Through dissolving the eutectic pockets and alleviating the corrosion attack of Mg matrix, the influence of HE on SCC resistance of T4 samples can be weakened.
Nanoscale perspective on the stress-corrosion cracking behavior of a peak-aged 7XXX-Al alloy

Martí López Freixes,Lionel Peguet,Timothy Warner,Baptiste Gault

2023-03-08

Abstract:High strength 7xxx Al-alloys are currently commonly used in aerospace and are expected to be increasingly employed in the automotive sector for weight reduction purposes. These alloys can however be sensitive to stress-corrosion cracking (SCC) depending on temper and loading conditions. Both the alloy's grain structure and composition are believed to play a key role in determining sensitivity to SCC. Here, we study at the nanometer scale the evolution of the microstructure near stress corrosion cracks on two different model variants of the 7140 aluminum alloy. We performed double cantilever beam (DCB) crack growth tests in hot (70°C) humid air, on samples extracted at quarter-thickness (T/4) and mid-thickness (T/2) and heat treated to a non-industrial, SCC sensitive T6 condition. The sample at T/4 shows a lower KISCC along with flatter grains and a higher solute content, whereas both samples exhibit similar crack growth rates at higher stress intensities. We report on precipitate dissolution and matrix solute enrichment near the crack tips, with the T/4 position presenting the higher increase in solute levels. The near grain boundary microstructure ahead of the crack is modified, with evidence of precipitate dissolution and transport of solutes towards the stress-corrosion crack tip. These results agree with a recent report on another 7xxx Al-alloy after SCC in Cl-solution, supporting the possibility that these mechanisms are generally occurring. We relate our findings with the measured SCC behavior and provide an array of possible mechanisms that could be widely applicable in SCC of high strength Al-alloys.

Materials Science
Corrosion Behavior in Magnesium-Based Alloys for Biomedical Applications

Liming Xu,Xingwang Liu,Kang Sun,Rao Fu,Gang Wang

DOI: https://doi.org/10.3390/ma15072613

IF: 3.4

2022-04-01

Materials

Abstract:Magnesium alloys exhibit superior biocompatibility and biodegradability, which makes them an excellent candidate for artificial implants. However, these materials also suffer from lower corrosion resistance, which limits their clinical applicability. The corrosion mechanism of Mg alloys is complicated since the spontaneous occurrence is determined by means of loss of aspects, e.g., the basic feature of materials and various corrosive environments. As such, this study provides a review of the general degradation/precipitation process multifactorial corrosion behavior and proposes a reasonable method for modeling and preventing corrosion in metals. In addition, the composition design, the structural treatment, and the surface processing technique are involved as potential methods to control the degradation rate and improve the biological properties of Mg alloys. This systematic representation of corrosive mechanisms and the comprehensive discussion of various technologies for applications could lead to improved designs for Mg-based biomedical devices in the future.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach

A. Githens,S. Ganesan,Z. Chen,J. Allison,V. Sundararaghavan,S. Daly

DOI: https://doi.org/10.1016/j.actamat.2019.12.012

IF: 9.4

2020-03-01

Acta Materialia

Abstract:The effect of aging on the accumulation of microscale plasticity, and the resulting macroscopic mechanical behavior, were examined in the magnesium alloy WE43 under uniaxial tension. Full-field strains on the length scale of the microstructure, and their relation to the underlying crystallography, were captured using a combination of electron backscatter diffraction, custom nanoparticle patterning processes for corrosion-susceptible alloys, scanning electron microscopy (SEM), in-SEM uniaxial tensile and compressive loading, and distortion-corrected digital image correlation. The as-received material exhibited an average grain size of 12 µm. The strain incurred on individual slip traces in magnesium was resolved for the first time. Insights into slip activation across the microstructure revealed that using Schmid's Law with the nominal Schmid Factor appeared to be predictive for basal and non-basal slip. The DIC results were compared with simulation using an advanced open-source crystal plasticity finite element (CPFE) code, PRISMS-Plasticity. The PRISMS-Plasticity model is a more precise determination of the local Schmid Factor and was used to simulate variations in slip and twin activity within each grain. Such simulations provide an avenue for physically interpreting the various slip traces observed in the dense DIC data and an improved understanding of the critical resolved shear stress of the various slip systems.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Predicting the Degradation Behavior of Magnesium Alloys with a Diffusion-Based Theoretical Model and in Vitro Corrosion Testing

Zhenquan Shen,Ming Zhao,Dong Bian,Danni Shen,Xiaochen Zhou,Jianing Liu,Yang Liu,Hui Guo,Yufeng Zheng

DOI: https://doi.org/10.1016/j.jmst.2019.02.004

2019-01-01

Abstract:Magnesium alloys have shown great potential for their use in the medical device field, due to the promising biodegradability. However, it remains a challenge to characterize the degradation behavior of the Mg alloys in a quantitative manner. As such, controlling the degradation rate of the Mg alloys as per our needs is still hard, which greatly limits the practical application of the Mg alloys as a degradable biomaterial. This paper discussed a numerical model developed based on the diffusion theory, which can capture the experimental degradation behavior of the Mg alloys precisely. The numerical model is then implemented into a finite element scheme, where the model is calibrated with the data from our previous studies on the corrosion of the as-cast Mg-1Ca and the as-rolled Mg-3Ge binary alloys. The degradation behavior of a pin implant is predicted using the calibrated model to demonstrate the model’s capability. A standard flow is provided in a practical framework for obtaining the degradation behavior of any biomedical Mg alloys. This methodology was further verified via the comparison with enormous available experimental results. Lastly, the material parameters defined in this model were provided as a new kind of material property.
Machine Learning-guided accelerated discovery of structure-property correlations in lean magnesium alloys for biomedical applications

Sreenivas Raguraman,Maitreyee Sharma Priyadarshini,Tram Nguyen,Ryan McGovern,Andrew Kim,Adam J. Griebel,Paulette Clancy,Timothy P. Weihs

2024-04-20

Abstract:Magnesium alloys are emerging as promising alternatives to traditional orthopedic implant materials thanks to their biodegradability, biocompatibility, and impressive mechanical characteristics. However, their rapid in-vivo degradation presents challenges, notably in upholding mechanical integrity over time. This study investigates the impact of high-temperature thermal processing on the mechanical and degradation attributes of a lean Mg-Zn-Ca-Mn alloy, ZX10. Utilizing rapid, cost-efficient characterization methods like X-ray diffraction and optical, we swiftly examine microstructural changes post-thermal treatment. Employing Pearson correlation coefficient analysis, we unveil the relationship between microstructural properties and critical targets (properties): hardness and corrosion resistance. Additionally, leveraging the least absolute shrinkage and selection operator (LASSO), we pinpoint the dominant microstructural factors among closely correlated variables. Our findings underscore the significant role of grain size refinement in strengthening and the predominance of the ternary Ca2Mg6Zn3 phase in corrosion behavior. This suggests that achieving an optimal blend of strength and corrosion resistance is attainable through fine grains and reduced concentration of ternary phases. This thorough investigation furnishes valuable insights into the intricate interplay of processing, structure, and properties in magnesium alloys, thereby advancing the development of superior biodegradable implant materials.

Materials Science
Testicular growth after successful varicocele correction in adolescents: comparison of artery sparing techniques with the Palomo procedure.

Omar H. Atassi,E. Kass,B. Steinert

DOI: https://doi.org/10.1097/00005392-199502000-00065

1995-02-01

Abstract:Testicular growth after varicocele surgery was evaluated in 116 boys 9 to 20 years old. A total of 88 boys was available for followup testicular examination 3 to 60 months after successful varicocele repair (mean 25). Left testicular volume loss of 2 cc or greater was present preoperatively in 72 of the 88 patients. The Palomo procedure was performed in 36 cases and repair using artery sparing techniques was done in 36. Mean relative left testicular volume increased 18% in the artery sparing group and 21% in the Palomo group. The increase in relative testicular volume compared to preoperative volumes was statistically significant in both groups (p < 0.05). There was no significant difference in testicular growth between the groups and no postoperative testicular atrophy was observed. A comparison group of 8 boys with uncorrected varicoceles demonstrated a mean relative volume increase of 3% (mean followup 22 months). The increase in testis volume in successfully corrected cases was statistically different (p < 0.05) from that of uncorrected cases. We conclude that reversal of varix induced testicular growth failure occurs only after successful surgical correction. The Palomo procedure resulted in equivalent testicular growth compared to the artery sparing techniques with fewer complications and no testicular atrophy despite intentional ligation of the testicular artery. Based on our data, we believe that the Palomo procedure should be the procedure of choice for adolescent varicocele correction.
A variational phase-field framework for multiphysics modelling of degradation and stress corrosion cracking in biodegradable magnesium alloys

Dawei Zhang,Songyun Ma,Julia Nachtsheim,Shunqi Zhang,Bernd Markert

DOI: https://doi.org/10.1016/j.jmps.2024.105694

IF: 5.582

2024-05-31

Journal of the Mechanics and Physics of Solids

Abstract:Biodegradable magnesium alloys have been developed as promising biomedical materials for temporary implants. To facilitate the development of implant design, it is essential to understand and quantify the corrosion behaviour of magnesium alloys under mixed chemo-mechanical loadings. In this study, a multiphase-field model is proposed based on the variational principle to capture the interactions between corrosion and ductile fracture in biodegradable magnesium alloys. Multiple order parameters are introduced to track the interfaces associated with crack propagation and magnesium dissolution. The deformation-fracture-corrosion interactions are considered in the energetic variational formulation with coupling functions. The governing equations are discretised using an incremental variational method and solved by a staggered scheme. Parametric studies on the coupling functions are performed to demonstrate the flexibility of the model. The proposed multiphase-field model is calibrated and validated by in vitro experiments with tensile specimens of rare-earth magnesium alloy WE43MEO. The experimental and computational results demonstrate that the proposed model can capture the degradation and stress corrosion cracking behaviours in the immersion tests and slow strain rate tensile-corrosion tests.

materials science, multidisciplinary,mechanics,physics, condensed matter
Research progress on corrosion behaviors and biocompatibility of rare-earth magnesium alloys in vivo and in vitro

Yuan Zhang,Yun Liu,Ruining Zheng,Yaqi Zheng,Liansheng Chen

DOI: https://doi.org/10.1016/j.jre.2023.03.005

IF: 4.632

2023-03-13

Journal of Rare Earths

Abstract:As yet, Mg alloys acting as the medical implants have drawn extensive attention, due to their spontaneous degradability, effective load-transmissibility and the excellent biocompatibility, particularly in bone tissue reconstruction and vascular radial-support. Regrettably, they inevitably suffer from the tension/compression-torsion, dynamic erosion and corrosion fatigue under complex service conditions, which lead to premature failure of implantation-materials. Micro-alloying addition is an effective way to delay the rapid degradation, especially in rare-earth micro-composite addition. It can not only reduce intensities of galvanic-corrosion by refining the grain sizes and adjusting the Volta-potentials distribution of the precipitates, but also modify the compositions and biocompatibility of the degradation products. Moreover, the higher compress tress on the surface can improve the stability and densification of the film layer, which enhanced the corrosion resistance. Thus, the latest research progress about in vivo/vitro degradation behaviors and biocompatibility of rare-earth Mg alloys is reviewed; The internal relationships between rare-earth elements, phase features and degradation behaviors of Mg alloys are summarized. Moreover, the effects of rare-earth addition on the film-characteristics are deeply explained, and the induced mechanisms of rare earth elements on the biocompatibility are revealed. Graphical abstract Rare-earth Mg alloys own unique degradation behaviors, which can degrade themselves after completing service requirement, showing great application potential. Download : Download high-res image (181KB) Download : Download full-size image

chemistry, applied
Fracture Behavior of Low-Pressure Sand-Cast Mg–Gd–Y Magnesium Alloy Under Different Types of Loads

Wencai Liu,Hongjie Liu,Xin Tong,Dehao Meng,Song Pang,Lv Xiao,Longkang Jiang,Guohua Wu

DOI: https://doi.org/10.1007/s11665-022-06583-0

IF: 2.3

2022-01-31

Journal of Materials Engineering and Performance

Abstract:The large-scale and complex-shaped sand castings of magnesium-rare earth (Mg-RE) alloys have broad application prospects in the aerospace field. Therefore, it is necessary to study the mechanical properties, especially the fracture behavior of the Mg-RE sand castings based on the reliability and safety requirements of the structural design. In this study, the mechanical behavior of Mg-10Gd-3Y-0.5Zr alloy in the as-cast and the peak-aged states are systematically studied under the quasi-static, impact, and cyclic loads. The initiation and propagation of the cracks under different load conditions are also emphatically discussed. The research results show that the micro-cracks in the sand-cast alloy are easy to initiate in the eutectics under quasi-static and impact loads and then propagate into the grain along the twin interface. The β' precipitates uniformly distributed in the matrix after the T6 treatment can improve the strength and deformation resistance of the matrix, thus leading to higher mechanical properties under the quasi-static and impact loads. In addition, the β' phases in the T6-treated alloy can inhibit the formation of twins, and the dislocation slip is the only deformation mechanism. The micro-cracks are mainly formed at the slip bands and cause failure under the high cycle fatigue load.

materials science, multidisciplinary
Rate dependence of damage formation in metallic-intermetallic Mg-Al-Ca composites

Setareh Medghalchi,Muhammad Zubair,Ehsan Karimi,Stefanie Sandlöbes-Haut,Ulrich Kerzel,Sandra Korte-Kerzel

2023-03-19

Abstract:We study a cast Mg-4.65Al-2.82Ca alloy with a microstructure containing $\alpha$-Mg matrix reinforced with a C36 Laves phase skeleton. Such ternary alloys are targeted for elevated temperature applications in automotive engines since they possess excellent creep properties. However, in application, the alloy may be subjected to a wide range of strain rates and in material development, accelerated testing is often of essence. It is therefore crucial to understand the effect of such rate variations. Here, we focus on their impact on damage formation. Due to the locally highly variable skeleton forming the reinforcement in this alloy, we employ an analysis based on high resolution panoramic imaging by scanning electron microscopy coupled with automated damage analysis by deep learning-based object detection and classification convolutional neural network algorithm (YOLOV5). We find that with decreasing strain rate the dominant damage mechanism for a given strain level changes: at a strain rate of $5\cdot10^{-4}/s$ the evolution of microcracks in the C36 Laves phase governs damage formation. However , when the strain rate is decreased to $5\cdot10^{-6}/s$, interface decohesion at the $\alpha$-Mg/Laves phase interfaces becomes equally important. We also observe a change in crack orientation indicating an increasing influence of plastic co-deformation of the {\alpha}-Mg matrix and Laves phase. We attribute this transition in leading damage mechanism to thermally activated processes at the interface.

Materials Science
The Localized Corrosion and Stress Corrosion Cracking of a 6005A-T6 Extrusion Profile

Jijun Ma,Jing Sun,Quanmei Guan,Qingwei Yang,Jian Tang,Chengxiong Zou,Jun Wang,Bin Tang,Hongchao Kou,Haisheng Wang,Jun Gao,Jinshan Li,William Yi Wang

DOI: https://doi.org/10.3390/ma14174924

IF: 3.4

2021-08-30

Materials

Abstract:In the present work, the localized corrosion and stress corrosion cracking (SCC) behaviors of a commercial 6005A-T6 aluminum extrusion profile was studied comprehensively. The velocity of crack growth in self-stressed double-cantilever beam (DCB) specimens under constant displacement was estimated, which also provides insight into the local microstructure evolutions at the crack tips caused by the localized pitting corrosion, intergranular corrosion (IGC), and intergranular SCC. Characterizations of local corrosion along the cracking path for a period of exposure to 3.5% NaCl were revealed via optical microscope (OM), scanning electron microscope (SEM), and electron backscatter diffraction (EBSD). The typical features of the pits dominated by the distribution of precipitates included the peripheral dissolution of the Al matrix, channeling corrosion, intergranular attack, and large pits in the grains. The discontinuous cracking at the crack tips indicated the hydrogen-embrittlement-mediated mechanism. Moreover, the local regions enriched with Mg2Si and Mg5Si6 phases and with low-angle grain boundaries presented better SCC resistance than those of the matrix with high-angle grain boundaries, supporting a strategy to develop advanced Al–Mg–Si alloys via interfacial engineering.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Autoregulation of blood flow.

F. Haddy

DOI: https://doi.org/10.1016/0002-8703(61)90267-8

IF: 5.099

1961-10-01

American Heart Journal

Abstract:
Correlations Between Stress Corrosion Cracking Susceptibility and Grain Boundary Microstructures for an Al–Zn–Mg Alloy

X. Y. Sun,B. Zhang,H. Q. Lin,Y. Zhou,L. Sun,J. Q. Wang,E. -H. Han,W. Ke

DOI: https://doi.org/10.1016/j.corsci.2013.07.032

IF: 7.72

2013-01-01

Corrosion Science

Abstract:The correlations between grain boundary precipitates (GBPs) area fraction and stress corrosion cracking (SCC) susceptibility for an Al-Zn-Mg alloy have been studied using TEM statistical investigations and image analysis. The results reveal that SCC susceptibility of the Al-Zn-Mg alloy first decreases and then increases with the increase of GBPs area fraction, which does not agree with Dix's anodic dissolution theory, suggesting that SCC of the Al-Zn-Mg alloy is dominated by hydrogen induced cracking when GBPs area fraction is relatively low and is dominated by anodic dissolution when GBPs area fraction is relatively high. (C) 2013 Elsevier Ltd. All rights reserved.

Burst and oscillation as disparate neuronal properties

Linking the effect of localised pitting corrosion with mechanical integrity of a rare earth magnesium alloy for implant use

Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment

In vitro evaluation of stress corrosion cracking susceptibility of PEO-coated rare-earth magnesium alloy WE43

Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control

Inhibiting stress corrosion cracking of a prefabricated surface‐defective magnesium alloy thanks to biological organic components

The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy

Influence of Phase Dissolution and Hydrogen Absorption on the Stress Corrosion Cracking Behavior of Mg-7%Gd-5%Y-1%Nd-0.5%Zr Alloy in 3.5 Wt.% NaCl Solution

Nanoscale perspective on the stress-corrosion cracking behavior of a peak-aged 7XXX-Al alloy

Corrosion Behavior in Magnesium-Based Alloys for Biomedical Applications

Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach

Predicting the Degradation Behavior of Magnesium Alloys with a Diffusion-Based Theoretical Model and in Vitro Corrosion Testing

Machine Learning-guided accelerated discovery of structure-property correlations in lean magnesium alloys for biomedical applications

Testicular growth after successful varicocele correction in adolescents: comparison of artery sparing techniques with the Palomo procedure.

A variational phase-field framework for multiphysics modelling of degradation and stress corrosion cracking in biodegradable magnesium alloys

Research progress on corrosion behaviors and biocompatibility of rare-earth magnesium alloys in vivo and in vitro

Fracture Behavior of Low-Pressure Sand-Cast Mg–Gd–Y Magnesium Alloy Under Different Types of Loads

Rate dependence of damage formation in metallic-intermetallic Mg-Al-Ca composites

The Localized Corrosion and Stress Corrosion Cracking of a 6005A-T6 Extrusion Profile

Autoregulation of blood flow.

Correlations Between Stress Corrosion Cracking Susceptibility and Grain Boundary Microstructures for an Al–Zn–Mg Alloy