Abstract:Accurate and efficient characterization and modelling of deformation responses are critically essential in the development of advanced metal forming processes. This work presents a virtual laboratory enabled constitutive framework for modelling complex deformation responses of dual phase (DP) steels under complex stress states, based on multi-phase full-field crystal plasticity (CP) and advanced phenomenological modelling. In the CP based virtual testing method, kinematic hardening and degradation of elastic modulus are modelled in particular to improve the capability for describing evolving microstructure induced mechanical responses of DP steels. The workflow of this framework is completely built and numerically implemented, including (i) representative volume element (RVE) generation based on microstructure characterisation, (ii) identification of multiphase CP model parameters, (iii) prediction of elastic modulus degradation, (iv) prediction of yield stresses and plastic potentials in uniaxial tension and biaxial tension with various stress ratios, and (v) prediction of stress–strain curves in reverse tension compression. Using DP780 and DP980 as case materials, the corresponding physical experiments are conducted to verify the accuracy of the virtual tests, showing a good agreement between the virtual and experimental approaches. Both experimental and virtual tests are used to calibrate advanced phenomenological constitutive models that include non-linear elasticity, anisotropic yielding, and kinematic hardening. The calibrated models are implemented into the finite element (FE) codes to predict complex deformation and springback behaviours of DP780 and DP980 sheets in U-bending processes. In comparison with forming experiments of U-channel parts, the virtually calibrated models are validated and show good performance in predicting deformation and springback behaviours, providing a high capability for process analysis. The findings support that the virtual laboratory enabled modelling approach could be a substitute for extensive, expensive, and hard-to-access physically mechanical experiments required in the model calibration for a more effective and efficient analysis of metal forming processes.

A variational phase-field framework for multiphysics modelling of degradation and stress corrosion cracking in biodegradable magnesium alloys

Phase-field modeling of pitting and mechanically-assisted corrosion of Mg alloys for biomedical applications

Experimental Characterization and Numerical Modeling of the Corrosion Effect on the Mechanical Properties of the Biodegradable Magnesium Alloy WE43 for Orthopedic Applications

Predicting the Degradation Behavior of Magnesium Alloys with a Diffusion-Based Theoretical Model and in Vitro Corrosion Testing

Computational modeling of degradation process of biodegradable magnesium biomaterials

Finite Element Based Physical Chemical Modeling of Corrosion in Magnesium Alloys

Virtual Laboratory Enabled Constitutive Modelling of Dual Phase Steels

Damage Evolution of Biodegradable Magnesium Alloy Stent Based on Configurational Forces.

A partitioned computational framework for damage evolution in stress corrosion cracking utilizing phase‐field

Anisotropic Damage Model under Continuum Slip Crystal Plasticity Theory for Single Crystals

Simulation of corrosion and mechanical degradation of additively manufactured Mg scaffolds in simulated body fluid

A Numerical Corrosion-Fatigue Model for Biodegradable Mg Alloy Stents.

An enhanced phenomenological model to predict surface-based localised corrosion of magnesium alloys for medical use

Modeling of Anisotropic and Asymmetric Behaviour of Magnesium Alloys at Elevated Temperature Coupled with Ductile Damage

A multi-dimensional non-uniform corrosion model for bioabsorbable metallic vascular stents

Modeling of inter- and transgranular stress corrosion crack propagation in polycrystalline material by using phase field method

A phase field formulation for dissolution-driven stress corrosion cracking

A microstructure-sensitive electro-chemo-mechanical phase-field model of pitting and stress corrosion cracking

Modelling of dynamic behaviour of orthotropic metals including damage and failure

A Micromagnetic-Mechanically Coupled Phase-Field Model for Fracture and Fatigue of Magnetostrictive Alloys

Research Progress on Corrosion Fatigue Behavior of Biomedical Degradable Magnesium-Based Alloys