Abstract:Ordered mesoporous, crystalline MgTa2O6 thin films with a mesoscopic nanoarchitecture were synthesized by evaporation-induced self-assembly (EISA) in combination with a sol-gel procedure. Utilization of novel templates, namely the block copolymers KLE (poly(ethylene-co-butylene)-b-poly(ethylene oxide)) and PIB6000 (CH3C(CH3)(2)(CH2C(CH3)(2))(107)CH2C(CH3)(2)C6H4O(CH2CH2O)(100)H), was the key to achieving a stable ordered mesoporous structure even upon crystallization of MgTa2O6 within the mesopore walls. The effect of the calcination temperature on the ability of the mesoporous films to assist the photodegradation of rhodamine B in water was studied. As a result, two maxima in the photocatalytic activity were identified in the calcination temperature range of 550-850 degrees C, peaking at 700 degrees C and 790 degrees C, and the origin of this was investigated by using temperature-dependent X-ray scattering. Optimal activity was obtained when the mesoporous film was heated to 790 degrees C; at this temperature, crystallinity was significantly high, with MgTa2O6 nanocrystals of 1.6 nm in size (averaged over all reflections), and an ordered mesoporous structure was maintained. When considering the turnover frequency of such photocatalysts, the optimized activity of the present nanoarchitectured MgTa2O6 thin film was ca. four times that of analogous anatase TiO2 films with ordered mesopores. Our study demonstrated that high crystallinity and well-developed mesoporosity have to be achieved in order to optimize the physicochemical performance of mesoporous metal-oxide films.

UV Processing of Oriented KTa0.50Nb0.50O3 Thin Films.

Processing of Oriented K(Ta,Nb)O3 Films Using Chemical Solution Deposition

Synthesis of Highly Oriented K(Ta,Nb)O3 (ta:Nb = 65:35) Film Using Metal Alkoxides

Properties of highly oriented transparent KTN/SiO2 (100) film prepared by PLD

Orientation-Control Synthesis Of Kta0.25nb0.75o3 Nanorods

Orientation-Control Synthesis of KTa<sub>0.25</sub>Nb<sub>0.75</sub>O<sub>3</sub>Nanorods

Preparation of Potassium Tantalate Niobate by Sol–Gel Method

Structure and Dielectric Properties of Highly (100)-Oriented PST Thin Films Deposited on MgO Substrates

Dielectric and Pyroelectric Properties of Alkoxy-Derived KTa0.35Nb0.65O3 Thin Film

Crystallization of BaTiO3Thin Film at 140°C by Metalorganic Decomposition Hydrothermal Method Using Different Precursors

Mesoporous MgTa 2o 6 thin films with enhanced photocatalytic activity: On the interplay between crystallinity and mesostructure

Crystallization of Batio3 Thin Film at 140 Degrees C by Metalorganic Decomposition Hydrothermal Method Using Tio2 Precursor

Ferroelectric Properties Of Transparent Ktn Thin Film Produced By Pulsed Laser Deposition

Electrophoretic Deposition and Photoluminescent Properties of Eu-doped BaTiO3thin Film from a Suspension of Monodispersed Nanocrystallites

Synthesis of Highly Oriented Lead Zirconate–Lead Titanate Film Using Metallo‐organics

Dielectric Properties of Bati2o5 Thick Films Prepared on Pt-Coated Mgo (110) Single-Crystal Substrate by Laser Chemical Vapor Deposition

Synthesis of KTiOPO4 (KTP) Thin Films Using Metallo-organics

Effects of Preparation Parameters on Microstructure and Properties of Calcium Titanate Oxides Thin Film

Ordered Mesoporous Thin Films Of Rutile Tio2 Nanocrystals Mixed With Amorphous Ta2o5

Crystallization of BaTiO<sub>3</sub> Thin Films Prepared by Metalorganic Decomposition with Hydrothermal Treatment at 140°C

Effect of UV-Irradiation on Processing of Lead Titanate Thin Film Derived from Photoreactive [Pb-Ti] Precursor Modified with Alkanolamine.