Abstract:TiO2-coated (Na0.85K0.15)(0.5)Bi0.5TiO3 (NKBT) composite films with thicknesses of 250 nm and 650 nm are synthesized on Pt(111)/Ti/SiO2/Si using an aqueous sol-gel method. X-ray diffraction (XRD) in omega-scan and psi-scan modes is performed to study the crystal orientation of the films. The electrical properties of the TiO2-coated NKBT composite films are investigated over a temperature range from -150 degrees C to 150 degrees C. Compared to films without the TiO2 layer, the TiO2-coated NKBT films exhibit enhanced electrical properties, higher temperature stability, and better endurance performance, which can be ascribed to the combined effects of the highly (100)-preferred orientation and improved degree of crystallization. The composite film in which TiO2 layers are attached on both sides of the 650 nm-thick NKBT film demonstrates the best ferroelectric performance with the highest remnant polarization (P-r) of 24.2( +/- 1.2) mu C/cm(2) under 750 kV/cm, the best piezoelectric performance with the highest effective piezoelectric constant (d(33)*) of 82( +/- 4) pm/V, and the best electric performance with the lowest leakage current density of 4.5 x 10(-6)( +/- 0.4 x 10(-6)) A/cm(2) at 20 V. Piezoresponse force microscopy (PFM) further confirms the enhanced ferroelectricity and domain switching of the TiO2 -coated composite films on a microscopic scale. In addition, the P-r values of the films increase gradually as the temperature decreases from 150 degrees C to-150 degrees C, while the d(33)* values exhibit the opposite trend, which is mainly attributed to the suppressed mobility of the domain walls at low temperatures.

Synthesis of KTiOPO4 (KTP) Thin Films Using Metallo-organics

Effect Of Phosphorus Sources On Synthesis Of Ktiopo4 Thin Films By Sol-Gel Method

Alkoxy‐Derived KTiOPO4 (KTP) Fibers

Synthesis of Pure KTiOPO/sub 4/ Nanocrystallites and KTiOPO/sub 4//sio/sub 2/ Nanocomposite Powders by Sol-Gel Method

Fabrication and analysis of single-crystal KTiOPO₄ films with thicknesses in the micrometer range

Low-Temperature Chemical Synthesis of Nanocrystalline Ktiopo4

Crystallization and nanostructure of transparent gel-derived KTiOPO 4/ SiO2 nano-glass-ceramics

Processing of Oriented K(Ta,Nb)O3 Films Using Chemical Solution Deposition

Synthesis Of Highly Oriented (Pb0.85la0.1)Tio3 Thin Films By Chemical Solution Deposition Method

Synthesis of Highly Oriented K(Ta,Nb)O3 (ta:Nb = 65:35) Film Using Metal Alkoxides

Preparation of Potassium Tantalate Niobate by Sol–Gel Method

UV Processing of Oriented KTa0.50Nb0.50O3 Thin Films.

Synthesis of Sr 2 KNb 5 O 15 Thin Films by Chemical Solution Deposition Method

Growth Orientation-Related Enhancement of Electrical Properties in (Na0.85k0.15)0.5bi0.5tio3-Based Composite Films

Electrophoretic Deposition and Photoluminescent Properties of Eu-doped BaTiO3thin Film from a Suspension of Monodispersed Nanocrystallites

Synthesis of Perovskite Structure (Ca-0.61, Nd-0.26)TiO3 Nanopaticles by Sol-Gel Method

Preparation of Nano-Structured BaTiO3 Thin Film by Electrophoretic Deposition and Its Characterization

Facet-selective nano-precipitation recrystalli-zation induced by laser-irradiation in nonlinear optical KTiOPO 4 crystal via ex situ electron microscopy

Structural, thermal and optical properties of KTi(0.92)La(0.08)OPO4 and KTi(0.94)Nd(0.06)OPO4

Synthesis of Highly Oriented Lead Zirconate–Lead Titanate Film Using Metallo‐organics

Synthesis of Mesoporous Thin Tio2 Films with Hexagonal Pore Structures Using Triblock Copolymer Templates