Abstract:This paper presented a silica-based 1 X 8 optical power splitter at 0.85 mum designed with Multi Mode Interference (MMI). The waveguide material is Si-based SiO2 doped with Ge and deposited by PECVD (Plasma Enhanced Chemical Vapor Deposition) method. The refractive index of glass substrate is 1.458, and the index difference is 0.75%. The input and output waveguides are optimized considering the characteristics of VCSEL (Vertical Cavity Surface Emitting Lasers). The core pitch on this chip is chosen as 250 mum to take the fiber connections into account, and the typical cladding diameter of optical fibers as 125 mum. The critical parameters in the fabrication of the MMI power splitter are the multimode section width and length. In general the key performance specifications of the optical power splitter are insertion loss and uniformity. We use a Finite Difference Beam Propagation Method (FDBPM) to simulate accurately the evolution of the fundamental mode power of the input guide incoming to the device, and analyze the relationships of various parameters in detail. The bend output waveguides are sin-bend styles. Compared with the commercial optical power splitter, the simulation results accord with the requirement of our design, containing compact size, low loss, stable splitting ratio, low crosstalk, large optical bandwidth, and good fabrication tolerances. The insertion loss and the uniformity of pilot study are 9.07 dB and 0.02 dB respectively.

Design Issues For An Ultra Compact Tapered Mmi Coupler Based 3 Db Splitter

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Design of an Ultra-Compact 3 Db MMI Coupler

Design of a Compact Multimode Interference Power Splitter Based on Deeply-etched SiO2 Ridge Waveguide

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

MULTI-MODE INTERFERENCE POWER SPLITTER IN GaAs FOR OPTICAL COMMUNICATION

Compact and economical MMI optical power splitter for optical communication

An ultra-broadband, and low loss 3-dB optical power splitter with curved adiabatic taper

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication

Compact silicon-on-insulator-based multimode interference coupler with bilevel taper structure.

Semi-vectorial Analysis of a Compact Wavelength Demultiplexer Based on the Tapered Multimode Interference Coupler

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Integrated Dual-Mode 3-Db Power Splitter Based on Multimode Interference Coupler

Design of a Wavelength Demultiplexer Based on a Parabolically Tapered Multimode Interference Coupler

Design And Study Of Wavelength 0.85 Mu M-Based Mmi Optical Power Splitter

Few-mode 3-Db Power Splitters Based on Polymer Waveguide Directional Couplers

Inverse Design of an Ultra-Compact 3 Db Splitter for Four Modes with Dual Polarizations

Design and Fabrication of Ultracompact 3-Db MMI Coupler in Silicon-on-Insulator

Design of an Ultrashort Si-nanowaveguide-based Multimode Interference Coupler of Arbitrary Shape.