Abstract:Adiabatic waveguide taper and on-chip wavelength demultiplexer are the key components of photonic integrated circuits. However, these two kinds of devices which were designed by the traditional semi-analytic methods or the brute-force search methods usually have large size. Here, based on the regularized digital metamaterials, a two-channel focused wavelength demultiplexer with a footprint of 2.4 x 10 mu m(2) has been proposed. The designed demultiplexer can directly connect to a grating coupler under the absence of a long adiabatic waveguide taper. The objective first method and the modified steepest descent method are used to design the demultiplexer which splits 1520 nm and 1580 nm light. Experimental results show that the insertion loss of the upper (lower) channel of the demultiplexer is -1.77 dB (-2.10 dB) and the crosstalk is -25.17 dB (-12.14 dB). Besides, the simulation results indicate that the fabrication tolerance of the device can reach +/- 20 nm in etching depth and +/- 10 nm in plane size changing. Benefitted from the extensibility of the design method, other types of ultra-compact "focused" devices, like mode splitters, mode converters, and power splitters can also be designed. Most importantly, this design method can be used to design devices with more complicated functionalities, such as multi-channel focused wavelength demultiplexers.

Design of a Wavelength Demultiplexer Based on a Parabolically Tapered Multimode Interference Coupler

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

Design and Numerical Optimization of A Mode Multiplexer Based on Few-Mode Fiber Couplers

Design of Optical Wavelength Demultiplexer Based on Off-Axis Meta-Lens

Design of MMI Double-wavelength Optical Power Splitters

Silicon Two-Mode Multi/demultiplexer Based on Tapered Couplers

An Ultra-Compact Dual-Channel Multimode Wavelength Demultiplexer Based on Inverse Design

Silicon-Based Mode Converter and Demultiplexer for Wavelength Division Multiplexing Transmission by Using Multimode Interference Couplers

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Inverse design of a multifunctional MMI waveguide for simultaneous wavelength demultiplexing and power splitting

Design of an Ultra-Broadband Silicon Mode (De)multiplexer

Implementation of on-chip multi-channel focusing wavelength demultiplexer with regularized digital metamaterials

Silicon Mode Multi/Demultiplexer Based on Multimode Grating-Assisted Couplers

A planar waveguide demultiplexer with a flat passband, sharp transitions and a low chromatic dispersion

Compact silicon-on-insulator-based multimode interference coupler with bilevel taper structure.

The Design of 1 × 2 MMI at the MIR Wavelength of 2 Μm

Broadband dual-mode 2 x 2 3 dB multimode interference couplers with a shallowly etched multimode section

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Design of Silicon Photonic Wavelength Conversion Chip for Mode-division Multiplexing Signals

A New Design Approach to MMI-based (De)multiplexers

Three-mode All-Optical (de)multiplexing on a SOI Chip