Abstract:From the perspective of the thermal/chemical performance management of a slot burner, three kinds of blended coatings with the low thermal conductivity and certain chemical activities, including 30wt.%Y2O3/ZrO2, 30wt.%MgO/ZrO2 and 30wt.%Al2O3/ZrO2, were prepared on stainless steel walls plated by atmospheric plasma spraying. The effects of coating material, wall temperature, and equivalence ratio on fuel-rich methane flame characteristics were investigated experimentally. The OH planar laser-induced fluorescence (OH-PLIF) technique was used to obtain OH intensity and flame anchoring location. The physical and chemical properties of different coatings before and after spraying were analyzed by a series of material and surface characterization techniques. Results show that compared with pure ZrO2 coating, the quenching distances of three ZrO2-based blended coatings with Y2O3, MgO, and Al2O3 decrease to some extent, resulting in the minimum quenching distance of Al2O3/ZrO2 coating, and the maximum one for Y2O3/ZrO2 coating. Meanwhile, the blended coating walls result in the higher flame anchoring location than that of pure ZrO2 in most cases, in which the coating of Y2O3/ZrO2 displays the highest location. The blended coatings have higher thermal conductivity, which is beneficial to balance part of the heat loss through the axial heat recirculation of wall structures, and thus expanding stability limits at low temperatures. In addition, partial lattice solid solutions are formed in mixture systems after the ultra-high-temperature thermal spraying, leading to more surface lattice oxygen and stronger chemical promotion. In , reasonable allocation of ZrO2-based ceramic components as coating wall is an effective alternative strategy to control flame stabilization in small-scale combustion devices.

Combustion Behaviour of Fe 2 O 3 -coated Zirconium Particles in Air

Combustion Characteristics of Zirconium Particles Coated with Ferrite Nanoparticles

Flame Propagation Characteristics and Combustion Mechanism of FeOOH-coated Zirconium Particles

Flame Propagation Characteristic of Zirconium Particle and Zirconium Particle Coated with Fe3O4

Flame propagation through zirconium particles coated with different ratios of Fe 3 O 4

Tuning Ignition and Energy Release Properties of Zirconium Powder by Atomic Layer Deposited Metal Oxide Coatings

Preparation and Characterization of Zirconium Carbide Coating on Coated Fuel Particles

Experiments on Oxidation and Combustion Behaviors of Cerium Metal Slice with Slow Heating under O2/Ar Atmospheric Conditions

Size Resolved High Temperature Oxidation Kinetics of Nano-Sized Titanium and Zirconium Particles.

One zirconia-based ceramic coating strategy of combustion stabilization for fuel-rich flames in a small-scale burner

Preparation and Flame Ablation Resistance of Al/Zn/Cu-Incorporated Yttria Partially Stabilized Zirconia Coating

Microstructure Analysis of Zirconium Carbide Layer on Pyrocarbon-Coated Particles Prepared by Zirconium Chloride Vapor Method

Experimental study on flames propagating through zirconium particle clouds.

Combustion synthesis of zinc ferrite powders

A New Design of Composite Fuel with Zr-coated TRISO Particles Dispersed in Metal Matrix

Flame Propagation Characteristic of Zirconium Particle Cloud

Solidification Mechanism and Microstructure Evolution of Al 2 O 3 -Zro 2 Ceramic Coating Prepared by Combustion Synthesis and Thermal Explosion Spraying

Effect of micron-sized zirconium powder on combustion decomposition behavior of molecular perovskite energetic material DAP-4

Oxidation and Ablation Resistance of Fe2O3 Modified ZrB2–SiC–Si Coating for Carbon/carbon Composites

Design and Characterization of Zirconium-Based Multilayer Coating for Carbon/carbon Composites Against Oxyacetylene Ablation

Effect Of Nicral/Ysz/Nicral-B.E Composite Coating On Combustion Products Of High-Temperature Alpha