Abstract:The paper investigates the process of oxidation of fine aluminum powder, consisting of spherical Al particles of a 'metal core/oxide shell' type, when heated in air at temperatures below 550°C. The highly dispersed aluminum powder 'Alex' used in the work (particle size 0.05-1.5 μm, average numerical particle diameter DN = 0.11 μm) was produced by electric explosion of a thin Al wire in argon with subsequent passivation in an oxygen-containing atmosphere. For the first time, the influence of particle size on the oxidation process has been identified. During the reaction, individual γ-Al2O3 oxide nuclei grow at the surface of Al particles with diameters less than 300 nm without laterally overlapping to form a protective passivating layer, as typically occurs during the oxidation of micron-sized particles or bulk metal. The localization of γ-Al2O3 nuclei is determined by the regions of peeling off the primary amorphous oxide film from the surface of the metal core of an Al particle due to the thermal decomposition of aluminum hydroxides (T350C) present within the particle shells. A significant increase in the contributions of the following factors leads to a high oxidation rate: the diffusion within disordered structure of a particle core and the surface diffusion of cations (Еа = 80.65.3 kJ/mol, 400–450°C), the surface and grain boundary diffusion of oxygen during the growth of γ-Al2O3 crystallites (Еа = 108.311.2 kJ/mol, 470–500°C) and the surface and grain boundary transport of anions through an amorphous and underling nanocrystalline oxide layer with a constant thickness (Еа = 205.18.6 kJ/mol, 520–550°C). The results obtained make it possible to expand the theoretical understanding of the manifestations of the size effect in solid-phase reactions and take into account its influence in practice.

Thermal Oxidation Process of Micron Zirconium Powder

Characterization of the Surface Oxygen-Diffusion Zone of the Thermally Oxidized Titanium

Thermal Reaction Characterization of Micron-sized Aluminum Powders in Air

Size Resolved High Temperature Oxidation Kinetics of Nano-Sized Titanium and Zirconium Particles.

The formation mechanism and distribution of micro-aluminum oxide layer

Thermal Oxidation Characteristics and Kinetics of Micron Aluminum Powder in Different Ambient Oxygen Concentration Atmospheres

High-temperature oxidation and nitridation of substoichiometric zirconium carbide in isothermal air

Oxidation kinetics of Cr-coated zirconium alloy: Effect of coating thickness and microstructure

Thermal enhancement of the oxidation layer of micron-sized aluminum powder and its anti-oxidation performance

Microstructure and phase transformation behavior of Al2O3–ZrO2 under microwave sintering

Gas-phase Photo-Oxidations of Organic Compounds over Different Forms of Zirconia

Initial stages of oxidation of aluminum powder in oxygen

Oxidation of fine aluminum particles: thermal-induced transformations in particle shells and kinetics of oxide nucleation

Effect of Discharge Energy on Micro-Arc Oxidation Coating of Zirconium Alloy

One-Chip Solution to Intelligent Robot Control: Implementing Hexapod Subsumption Architecture Using a Contemporary Microprocessor

Optimisation on the stability of CaO-doped partially stabilised zirconia by microwave heating

The Influence of Oxide Color on the Surface Characteristics of Zirconium Alloy ZrNb7 (wt%) After Different Heat Treatments

Kinetic Studies of Oxidation of MgAlON and a Comparison of the Oxidation Behaviour of AlON, MgAlON, O'SiAlON-ZrO2, and BN–ZCM Ceramics

Preparation of spherical zirconia powder by nano-reactor of microemulsion and its densification behavior

High-temperature steam oxidation experiment of molten zirconium alloy

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method